All Win32 error codes MUST be in the range 0x0000 to 0xFFFF, although Win32 error codes can be used both in 16-bit fields (such as within the HRESULT type specified in section 2.1) as well as 32-bit fields. Most values also have a default message defined, which can be used to map the value to a human-readable text message; when this is done, the Win32 error code is also known as a message identifier.
0x00000000 – ERROR_SUCCESS
The operation completed successfully.
0x00000000 – NERR_Success
The operation completed successfully.
0x00000001 – ERROR_INVALID_FUNCTION
Incorrect function.
0x00000002 – ERROR_FILE_NOT_FOUND
The system cannot find the file specified.
0x00000003 – ERROR_PATH_NOT_FOUND
The system cannot find the path specified.
0x00000004 – ERROR_TOO_MANY_OPEN_FILES
The system cannot open the file.
0x00000005 – ERROR_ACCESS_DENIED
Access is denied.
0x00000006 – ERROR_INVALID_HANDLE
The handle is invalid.
0x00000007 – ERROR_ARENA_TRASHED
The storage control blocks were destroyed.
0x00000008 – ERROR_NOT_ENOUGH_MEMORY
Not enough storage is available to process this command.
0x00000009 – ERROR_INVALID_BLOCK
The storage control block address is invalid.
0x0000000A – ERROR_BAD_ENVIRONMENT
The environment is incorrect.
0x0000000B – ERROR_BAD_FORMAT
An attempt was made to load a program with an incorrect format.
0x0000000C – ERROR_INVALID_ACCESS
The access code is invalid.
0x0000000D – ERROR_INVALID_DATA
The data is invalid.
0x0000000E – ERROR_OUTOFMEMORY
Not enough storage is available to complete this operation.
0x0000000F – ERROR_INVALID_DRIVE
The system cannot find the drive specified.
0x00000010 – ERROR_CURRENT_DIRECTORY
The directory cannot be removed.
0x00000011 – ERROR_NOT_SAME_DEVICE
The system cannot move the file to a different disk drive.
0x00000012 – ERROR_NO_MORE_FILES
There are no more files.
0x00000013 – ERROR_WRITE_PROTECT
The media is write-protected.
0x00000014 – ERROR_BAD_UNIT
The system cannot find the device specified.
0x00000015 – ERROR_NOT_READY
The device is not ready.
0x00000016 – ERROR_BAD_COMMAND
The device does not recognize the command.
0x00000017 – ERROR_CRC
Data error (cyclic redundancy check).
0x00000018 – ERROR_BAD_LENGTH
The program issued a command but the command length is incorrect.
0x00000019 – ERROR_SEEK
The drive cannot locate a specific area or track on the disk.
0x0000001A – ERROR_NOT_DOS_DISK
The specified disk cannot be accessed.
0x0000001B – ERROR_SECTOR_NOT_FOUND
The drive cannot find the sector requested.
0x0000001C – ERROR_OUT_OF_PAPER
The printer is out of paper.
0x0000001D – ERROR_WRITE_FAULT
The system cannot write to the specified device.
0x0000001E – ERROR_READ_FAULT
The system cannot read from the specified device.
0x0000001F – ERROR_GEN_FAILURE
A device attached to the system is not functioning.
0x00000020 – ERROR_SHARING_VIOLATION
The process cannot access the file because it is being used by another process.
0x00000021 – ERROR_LOCK_VIOLATION
The process cannot access the file because another process has locked a portion of the file.
0x00000022 – ERROR_WRONG_DISK
The wrong disk is in the drive. Insert %2 (Volume Serial Number: %3) into drive %1.
0x00000024 – ERROR_SHARING_BUFFER_EXCEEDED
Too many files opened for sharing.
0x00000026 – ERROR_HANDLE_EOF
Reached the end of the file.
0x00000027 – ERROR_HANDLE_DISK_FULL
The disk is full.
0x00000032 – ERROR_NOT_SUPPORTED
The request is not supported.
0x00000033 – ERROR_REM_NOT_LIST
Windows cannot find the network path. Verify that the network path is correct and the destination computer is not busy or turned off. If Windows still cannot find the network path, contact your network administrator.
0x00000034 – ERROR_DUP_NAME
You were not connected because a duplicate name exists on the network. Go to System in Control Panel to change the computer name, and then try again.
0x00000035 – ERROR_BAD_NETPATH
The network path was not found.
0x00000036 – ERROR_NETWORK_BUSY
The network is busy.
0x00000037 – ERROR_DEV_NOT_EXIST
The specified network resource or device is no longer available.
0x00000038 – ERROR_TOO_MANY_CMDS
The network BIOS command limit has been reached.
0x00000039 – ERROR_ADAP_HDW_ERR
A network adapter hardware error occurred.
0x0000003A – ERROR_BAD_NET_RESP
The specified server cannot perform the requested operation.
0x0000003B – ERROR_UNEXP_NET_ERR
An unexpected network error occurred.
0x0000003C – ERROR_BAD_REM_ADAP
The remote adapter is not compatible.
0x0000003D – ERROR_PRINTQ_FULL
The print queue is full.
0x0000003E – ERROR_NO_SPOOL_SPACE
Space to store the file waiting to be printed is not available on the server.
0x0000003F – ERROR_PRINT_CANCELLED
Your file waiting to be printed was deleted.
0x00000040 – ERROR_NETNAME_DELETED
The specified network name is no longer available.
0x00000041 – ERROR_NETWORK_ACCESS_DENIED
Network access is denied.
0x00000042 – ERROR_BAD_DEV_TYPE
The network resource type is not correct.
0x00000043 – ERROR_BAD_NET_NAME
The network name cannot be found.
0x00000044 – ERROR_TOO_MANY_NAMES
The name limit for the local computer network adapter card was exceeded.
0x00000045 – ERROR_TOO_MANY_SESS
The network BIOS session limit was exceeded.
0x00000046 – ERROR_SHARING_PAUSED
The remote server has been paused or is in the process of being started.
0x00000047 – ERROR_REQ_NOT_ACCEP
No more connections can be made to this remote computer at this time because the computer has accepted the maximum number of connections.
0x00000048 – ERROR_REDIR_PAUSED
The specified printer or disk device has been paused.
0x00000050 – ERROR_FILE_EXISTS
The file exists.
0x00000052 – ERROR_CANNOT_MAKE
The directory or file cannot be created.
0x00000053 – ERROR_FAIL_I24
Fail on INT 24.
0x00000054 – ERROR_OUT_OF_STRUCTURES
Storage to process this request is not available.
0x00000055 – ERROR_ALREADY_ASSIGNED
The local device name is already in use.
0x00000056 – ERROR_INVALID_PASSWORD
The specified network password is not correct.
0x00000057 – ERROR_INVALID_PARAMETER
The parameter is incorrect.
0x00000058 – ERROR_NET_WRITE_FAULT
A write fault occurred on the network.
0x00000059 – ERROR_NO_PROC_SLOTS
The system cannot start another process at this time.
0x00000064 – ERROR_TOO_MANY_SEMAPHORES
Cannot create another system semaphore.
0x00000065 – ERROR_EXCL_SEM_ALREADY_OWNED
The exclusive semaphore is owned by another process.
0x00000066 – ERROR_SEM_IS_SET
The semaphore is set and cannot be closed.
0x00000067 – ERROR_TOO_MANY_SEM_REQUESTS
The semaphore cannot be set again.
0x00000068 – ERROR_INVALID_AT_INTERRUPT_TIME
Cannot request exclusive semaphores at interrupt time.
0x00000069 – ERROR_SEM_OWNER_DIED
The previous ownership of this semaphore has ended.
0x0000006A – ERROR_SEM_USER_LIMIT
Insert the disk for drive %1.
0x0000006B – ERROR_DISK_CHANGE
The program stopped because an alternate disk was not inserted.
0x0000006C – ERROR_DRIVE_LOCKED
The disk is in use or locked by another process.
0x0000006D – ERROR_BROKEN_PIPE
The pipe has been ended.
0x0000006E – ERROR_OPEN_FAILED
The system cannot open the device or file specified.
0x0000006F – ERROR_BUFFER_OVERFLOW
The file name is too long.
0x00000070 – ERROR_DISK_FULL
There is not enough space on the disk.
0x00000071 – ERROR_NO_MORE_SEARCH_HANDLES
No more internal file identifiers are available.
0x00000072 – ERROR_INVALID_TARGET_HANDLE
The target internal file identifier is incorrect.
0x00000075 – ERROR_INVALID_CATEGORY
The Input Output Control (IOCTL) call made by the application program is not correct.
0x00000076 – ERROR_INVALID_VERIFY_SWITCH
The verify-on-write switch parameter value is not correct.
0x00000077 – ERROR_BAD_DRIVER_LEVEL
The system does not support the command requested.
0x00000078 – ERROR_CALL_NOT_IMPLEMENTED
This function is not supported on this system.
0x00000079 – ERROR_SEM_TIMEOUT
The semaphore time-out period has expired.
0x0000007A – ERROR_INSUFFICIENT_BUFFER
The data area passed to a system call is too small.
0x0000007B – ERROR_INVALID_NAME
The file name, directory name, or volume label syntax is incorrect.
0x0000007C – ERROR_INVALID_LEVEL
The system call level is not correct.
0x0000007D – ERROR_NO_VOLUME_LABEL
The disk has no volume label.
0x0000007E – ERROR_MOD_NOT_FOUND
The specified module could not be found.
0x0000007F – ERROR_PROC_NOT_FOUND
The specified procedure could not be found.
0x00000080 – ERROR_WAIT_NO_CHILDREN
There are no child processes to wait for.
0x00000081 – ERROR_CHILD_NOT_COMPLETE
The %1 application cannot be run in Win32 mode.
0x00000082 – ERROR_DIRECT_ACCESS_HANDLE
Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O.
0x00000083 – ERROR_NEGATIVE_SEEK
An attempt was made to move the file pointer before the beginning of the file.
0x00000084 – ERROR_SEEK_ON_DEVICE
The file pointer cannot be set on the specified device or file.
0x00000085 – ERROR_IS_JOIN_TARGET
A JOIN or SUBST command cannot be used for a drive that contains previously joined drives.
0x00000086 – ERROR_IS_JOINED
An attempt was made to use a JOIN or SUBST command on a drive that has already been joined.
0x00000087 – ERROR_IS_SUBSTED
An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted.
0x00000088 – ERROR_NOT_JOINED
The system tried to delete the JOIN of a drive that is not joined.
0x00000089 – ERROR_NOT_SUBSTED
The system tried to delete the substitution of a drive that is not substituted.
0x0000008A – ERROR_JOIN_TO_JOIN
The system tried to join a drive to a directory on a joined drive.
0x0000008B – ERROR_SUBST_TO_SUBST
The system tried to substitute a drive to a directory on a substituted drive.
0x0000008C – ERROR_JOIN_TO_SUBST
The system tried to join a drive to a directory on a substituted drive.
0x0000008D – ERROR_SUBST_TO_JOIN
The system tried to SUBST a drive to a directory on a joined drive.
0x0000008E – ERROR_BUSY_DRIVE
The system cannot perform a JOIN or SUBST at this time.
0x0000008F – ERROR_SAME_DRIVE
The system cannot join or substitute a drive to or for a directory on the same drive.
0x00000090 – ERROR_DIR_NOT_ROOT
The directory is not a subdirectory of the root directory.
0x00000091 – ERROR_DIR_NOT_EMPTY
The directory is not empty.
0x00000092 – ERROR_IS_SUBST_PATH
The path specified is being used in a substitute.
0x00000093 – ERROR_IS_JOIN_PATH
Not enough resources are available to process this command.
0x00000094 – ERROR_PATH_BUSY
The path specified cannot be used at this time.
0x00000095 – ERROR_IS_SUBST_TARGET
An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute.
0x00000096 – ERROR_SYSTEM_TRACE
System trace information was not specified in your CONFIG.SYS file, or tracing is disallowed.
0x00000097 – ERROR_INVALID_EVENT_COUNT
The number of specified semaphore events for DosMuxSemWait is not correct.
0x00000098 – ERROR_TOO_MANY_MUXWAITERS
DosMuxSemWait did not execute; too many semaphores are already set.
0x00000099 – ERROR_INVALID_LIST_FORMAT
The DosMuxSemWait list is not correct.
0x0000009A – ERROR_LABEL_TOO_LONG
The volume label you entered exceeds the label character limit of the destination file system.
0x0000009B – ERROR_TOO_MANY_TCBS
Cannot create another thread.
0x0000009C – ERROR_SIGNAL_REFUSED
The recipient process has refused the signal.
0x0000009D – ERROR_DISCARDED
The segment is already discarded and cannot be locked.
0x0000009E – ERROR_NOT_LOCKED
The segment is already unlocked.
0x0000009F – ERROR_BAD_THREADID_ADDR
The address for the thread ID is not correct.
0x000000A0 – ERROR_BAD_ARGUMENTS
One or more arguments are not correct.
0x000000A1 – ERROR_BAD_PATHNAME
The specified path is invalid.
0x000000A2 – ERROR_SIGNAL_PENDING
A signal is already pending.
0x000000A4 – ERROR_MAX_THRDS_REACHED
No more threads can be created in the system.
0x000000A7 – ERROR_LOCK_FAILED
Unable to lock a region of a file.
0x000000AA – ERROR_BUSY
The requested resource is in use.
0x000000AD – ERROR_CANCEL_VIOLATION
A lock request was not outstanding for the supplied cancel region.
0x000000AE – ERROR_ATOMIC_LOCKS_NOT_SUPPORTED
The file system does not support atomic changes to the lock type.
0x000000B4 – ERROR_INVALID_SEGMENT_NUMBER
The system detected a segment number that was not correct.
0x000000B6 – ERROR_INVALID_ORDINAL
The operating system cannot run %1.
0x000000B7 – ERROR_ALREADY_EXISTS
Cannot create a file when that file already exists.
0x000000BA – ERROR_INVALID_FLAG_NUMBER
The flag passed is not correct.
0x000000BB – ERROR_SEM_NOT_FOUND
The specified system semaphore name was not found.
0x000000BC – ERROR_INVALID_STARTING_CODESEG
The operating system cannot run %1.
0x000000BD – ERROR_INVALID_STACKSEG
The operating system cannot run %1.
0x000000BE – ERROR_INVALID_MODULETYPE
The operating system cannot run %1.
0x000000BF – ERROR_INVALID_EXE_SIGNATURE
Cannot run %1 in Win32 mode.
0x000000C0 – ERROR_EXE_MARKED_INVALID
The operating system cannot run %1.
0x000000C1 – ERROR_BAD_EXE_FORMAT
%1 is not a valid Win32 application.
0x000000C2 – ERROR_ITERATED_DATA_EXCEEDS_64k
The operating system cannot run %1.
0x000000C3 – ERROR_INVALID_MINALLOCSIZE
The operating system cannot run %1.
0x000000C4 – ERROR_DYNLINK_FROM_INVALID_RING
The operating system cannot run this application program.
0x000000C5 – ERROR_IOPL_NOT_ENABLED
The operating system is not presently configured to run this application.
0x000000C6 – ERROR_INVALID_SEGDPL
The operating system cannot run %1.
0x000000C7 – ERROR_AUTODATASEG_EXCEEDS_64k
The operating system cannot run this application program.
0x000000C8 – ERROR_RING2SEG_MUST_BE_MOVABLE
The code segment cannot be greater than or equal to 64 KB.
0x000000C9 – ERROR_RELOC_CHAIN_XEEDS_SEGLIM
The operating system cannot run %1.
0x000000CA – ERROR_INFLOOP_IN_RELOC_CHAIN
The operating system cannot run %1.
0x000000CB – ERROR_ENVVAR_NOT_FOUND
The system could not find the environment option that was entered.
0x000000CD – ERROR_NO_SIGNAL_SENT
No process in the command subtree has a signal handler.
0x000000CE – ERROR_FILENAME_EXCED_RANGE
The file name or extension is too long.
0x000000CF – ERROR_RING2_STACK_IN_USE
The ring 2 stack is in use.
0x000000D0 – ERROR_META_EXPANSION_TOO_LONG
The asterisk (
) or question mark (?) global file name characters are entered incorrectly, or too many global file name characters are specified.
0x000000D1 – ERROR_INVALID_SIGNAL_NUMBER
The signal being posted is not correct.
0x000000D2 – ERROR_THREAD_1_INACTIVE
The signal handler cannot be set.
0x000000D4 – ERROR_LOCKED
The segment is locked and cannot be reallocated.
0x000000D6 – ERROR_TOO_MANY_MODULES
Too many dynamic-link modules are attached to this program or dynamic-link module.
0x000000D7 – ERROR_NESTING_NOT_ALLOWED
Cannot nest calls to LoadModule.
0x000000D8 – ERROR_EXE_MACHINE_TYPE_MISMATCH
This version of %1 is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher.
0x000000D9 – ERROR_EXE_CANNOT_MODIFY_SIGNED_BINARY
The image file %1 is signed, unable to modify.
0x000000DA – ERROR_EXE_CANNOT_MODIFY_STRONG_SIGNED_BINARY
The image file %1 is strong signed, unable to modify.
0x000000DC – ERROR_FILE_CHECKED_OUT
This file is checked out or locked for editing by another user.
0x000000DD – ERROR_CHECKOUT_REQUIRED
The file must be checked out before saving changes.
0x000000DE – ERROR_BAD_FILE_TYPE
The file type being saved or retrieved has been blocked.
0x000000DF – ERROR_FILE_TOO_LARGE
The file size exceeds the limit allowed and cannot be saved.
0x000000E0 – ERROR_FORMS_AUTH_REQUIRED
Access denied. Before opening files in this location, you must first browse to the website and select the option to sign in automatically.
0x000000E1 – ERROR_VIRUS_INFECTED
Operation did not complete successfully because the file contains a virus.
0x000000E2 – ERROR_VIRUS_DELETED
This file contains a virus and cannot be opened. Due to the nature of this virus, the file has been removed from this location.
0x000000E5 – ERROR_PIPE_LOCAL
The pipe is local.
0x000000E6 – ERROR_BAD_PIPE
The pipe state is invalid.
0x000000E7 – ERROR_PIPE_BUSY
All pipe instances are busy.
0x000000E8 – ERROR_NO_DATA
The pipe is being closed.
0x000000E9 – ERROR_PIPE_NOT_CONNECTED
No process is on the other end of the pipe.
0x000000EA – ERROR_MORE_DATA
More data is available.
0x000000F0 – ERROR_VC_DISCONNECTED
The session was canceled.
0x000000FE – ERROR_INVALID_EA_NAME
The specified extended attribute name was invalid.
0x000000FF – ERROR_EA_LIST_INCONSISTENT
The extended attributes are inconsistent.
0x00000102 – WAIT_TIMEOUT
The wait operation timed out.
0x00000103 – ERROR_NO_MORE_ITEMS
No more data is available.
0x0000010A – ERROR_CANNOT_COPY
The copy functions cannot be used.
0x0000010B – ERROR_DIRECTORY
The directory name is invalid.
0x00000113 – ERROR_EAS_DIDNT_FIT
The extended attributes did not fit in the buffer.
0x00000114 – ERROR_EA_FILE_CORRUPT
The extended attribute file on the mounted file system is corrupt.
0x00000115 – ERROR_EA_TABLE_FULL
The extended attribute table file is full.
0x00000116 – ERROR_INVALID_EA_HANDLE
The specified extended attribute handle is invalid.
0x0000011A – ERROR_EAS_NOT_SUPPORTED
The mounted file system does not support extended attributes.
0x00000120 – ERROR_NOT_OWNER
Attempt to release mutex not owned by caller.
0x0000012A – ERROR_TOO_MANY_POSTS
Too many posts were made to a semaphore.
0x0000012B – ERROR_PARTIAL_COPY
Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
0x0000012C – ERROR_OPLOCK_NOT_GRANTED
The oplock request is denied.
0x0000012D – ERROR_INVALID_OPLOCK_PROTOCOL
An invalid oplock acknowledgment was received by the system.
0x0000012E – ERROR_DISK_TOO_FRAGMENTED
The volume is too fragmented to complete this operation.
0x0000012F – ERROR_DELETE_PENDING
The file cannot be opened because it is in the process of being deleted.
0x0000013D – ERROR_MR_MID_NOT_FOUND
The system cannot find message text for message number 0x%1 in the message file for %2.
0x0000013E – ERROR_SCOPE_NOT_FOUND
The scope specified was not found.
0x0000015E – ERROR_FAIL_NOACTION_REBOOT
No action was taken because a system reboot is required.
0x0000015F – ERROR_FAIL_SHUTDOWN
The shutdown operation failed.
0x00000160 – ERROR_FAIL_RESTART
The restart operation failed.
0x00000161 – ERROR_MAX_SESSIONS_REACHED
The maximum number of sessions has been reached.
0x00000190 – ERROR_THREAD_MODE_ALREADY_BACKGROUND
The thread is already in background processing mode.
0x00000191 – ERROR_THREAD_MODE_NOT_BACKGROUND
The thread is not in background processing mode.
0x00000192 – ERROR_PROCESS_MODE_ALREADY_BACKGROUND
The process is already in background processing mode.
0x00000193 – ERROR_PROCESS_MODE_NOT_BACKGROUND
The process is not in background processing mode.
0x000001E7 – ERROR_INVALID_ADDRESS
Attempt to access invalid address.
0x000001F4 – ERROR_USER_PROFILE_LOAD
User profile cannot be loaded.
0x00000216 – ERROR_ARITHMETIC_OVERFLOW
Arithmetic result exceeded 32 bits.
0x00000217 – ERROR_PIPE_CONNECTED
There is a process on the other end of the pipe.
0x00000218 – ERROR_PIPE_LISTENING
Waiting for a process to open the other end of the pipe.
0x00000219 – ERROR_VERIFIER_STOP
Application verifier has found an error in the current process.
0x0000021A – ERROR_ABIOS_ERROR
An error occurred in the ABIOS subsystem.
0x0000021B – ERROR_WX86_WARNING
A warning occurred in the WX86 subsystem.
0x0000021C – ERROR_WX86_ERROR
An error occurred in the WX86 subsystem.
0x0000021D – ERROR_TIMER_NOT_CANCELED
An attempt was made to cancel or set a timer that has an associated asynchronous procedure call (APC) and the subject thread is not the thread that originally set the timer with an associated APC routine.
0x0000021E – ERROR_UNWIND
Unwind exception code.
0x0000021F – ERROR_BAD_STACK
An invalid or unaligned stack was encountered during an unwind operation.
0x00000220 – ERROR_INVALID_UNWIND_TARGET
An invalid unwind target was encountered during an unwind operation.
0x00000221 – ERROR_INVALID_PORT_ATTRIBUTES
Invalid object attributes specified to NtCreatePort or invalid port attributes specified to NtConnectPort.
0x00000222 – ERROR_PORT_MESSAGE_TOO_LONG
Length of message passed to NtRequestPort or NtRequestWaitReplyPort was longer than the maximum message allowed by the port.
0x00000223 – ERROR_INVALID_QUOTA_LOWER
An attempt was made to lower a quota limit below the current usage.
0x00000224 – ERROR_DEVICE_ALREADY_ATTACHED
An attempt was made to attach to a device that was already attached to another device.
0x00000225 – ERROR_INSTRUCTION_MISALIGNMENT
An attempt was made to execute an instruction at an unaligned address, and the host system does not support unaligned instruction references.
0x00000226 – ERROR_PROFILING_NOT_STARTED
Profiling not started.
0x00000227 – ERROR_PROFILING_NOT_STOPPED
Profiling not stopped.
0x00000228 – ERROR_COULD_NOT_INTERPRET
The passed ACL did not contain the minimum required information.
0x00000229 – ERROR_PROFILING_AT_LIMIT
The number of active profiling objects is at the maximum and no more can be started.
0x0000022A – ERROR_CANT_WAIT
Used to indicate that an operation cannot continue without blocking for I/O.
0x0000022B – ERROR_CANT_TERMINATE_SELF
Indicates that a thread attempted to terminate itself by default (called NtTerminateThread with NULL) and it was the last thread in the current process.
0x0000022C – ERROR_UNEXPECTED_MM_CREATE_ERR
If an MM error is returned that is not defined in the standard FsRtl filter, it is converted to one of the following errors that is guaranteed to be in the filter. In this case, information is lost; however, the filter correctly handles the exception.
0x0000022D – ERROR_UNEXPECTED_MM_MAP_ERROR
If an MM error is returned that is not defined in the standard FsRtl filter, it is converted to one of the following errors that is guaranteed to be in the filter. In this case, information is lost; however, the filter correctly handles the exception.
0x0000022E – ERROR_UNEXPECTED_MM_EXTEND_ERR
If an MM error is returned that is not defined in the standard FsRtl filter, it is converted to one of the following errors that is guaranteed to be in the filter. In this case, information is lost; however, the filter correctly handles the exception.
0x0000022F – ERROR_BAD_FUNCTION_TABLE
A malformed function table was encountered during an unwind operation.
0x00000230 – ERROR_NO_GUID_TRANSLATION
Indicates that an attempt was made to assign protection to a file system file or directory and one of the SIDs in the security descriptor could not be translated into a GUID that could be stored by the file system. This causes the protection attempt to fail, which might cause a file creation attempt to fail.
0x00000231 – ERROR_INVALID_LDT_SIZE
Indicates that an attempt was made to grow a local domain table (LDT) by setting its size, or that the size was not an even number of selectors.
0x00000233 – ERROR_INVALID_LDT_OFFSET
Indicates that the starting value for the LDT information was not an integral multiple of the selector size.
0x00000234 – ERROR_INVALID_LDT_DESCRIPTOR
Indicates that the user supplied an invalid descriptor when trying to set up LDT descriptors.
0x00000235 – ERROR_TOO_MANY_THREADS
Indicates a process has too many threads to perform the requested action. For example, assignment of a primary token can be performed only when a process has zero or one threads.
0x00000236 – ERROR_THREAD_NOT_IN_PROCESS
An attempt was made to operate on a thread within a specific process, but the thread specified is not in the process specified.
0x00000237 – ERROR_PAGEFILE_QUOTA_EXCEEDED
Page file quota was exceeded.
0x00000238 – ERROR_LOGON_SERVER_CONFLICT
The Netlogon service cannot start because another Netlogon service running in the domain conflicts with the specified role.
0x00000239 – ERROR_SYNCHRONIZATION_REQUIRED
On applicable Windows Server releases, the Security Accounts Manager (SAM) database is significantly out of synchronization with the copy on the domain controller. A complete synchronization is required.
0x0000023A – ERROR_NET_OPEN_FAILED
The NtCreateFile API failed. This error should never be returned to an application, it is a place holder for the Windows LAN Manager Redirector to use in its internal error mapping routines.
0x0000023B – ERROR_IO_PRIVILEGE_FAILED
{Privilege Failed} The I/O permissions for the process could not be changed.
0x0000023C – ERROR_CONTROL_C_EXIT
{Application Exit by CTRL+C} The application terminated as a result of a CTRL+C.
0x0000023D – ERROR_MISSING_SYSTEMFILE
{Missing System File} The required system file %hs is bad or missing.
0x0000023E – ERROR_UNHANDLED_EXCEPTION
{Application Error} The exception %s (0x%08lx) occurred in the application at location 0x%08lx.
0x0000023F – ERROR_APP_INIT_FAILURE
{Application Error} The application failed to initialize properly (0x%lx). Click OK to terminate the application.
0x00000240 – ERROR_PAGEFILE_CREATE_FAILED
{Unable to Create Paging File} The creation of the paging file %hs failed (%lx). The requested size was %ld.
0x00000241 – ERROR_INVALID_IMAGE_HASH
The hash for the image cannot be found in the system catalogs. The image is likely corrupt or the victim of tampering.
0x00000242 – ERROR_NO_PAGEFILE
{No Paging File Specified} No paging file was specified in the system configuration.
0x00000243 – ERROR_ILLEGAL_FLOAT_CONTEXT
{EXCEPTION} A real-mode application issued a floating-point instruction, and floating-point hardware is not present.
0x00000244 – ERROR_NO_EVENT_PAIR
An event pair synchronization operation was performed using the thread-specific client/server event pair object, but no event pair object was associated with the thread.
0x00000245 – ERROR_DOMAIN_CTRLR_CONFIG_ERROR
A domain server has an incorrect configuration.
0x00000246 – ERROR_ILLEGAL_CHARACTER
An illegal character was encountered. For a multibyte character set, this includes a lead byte without a succeeding trail byte. For the Unicode character set, this includes the characters 0xFFFF and 0xFFFE.
0x00000247 – ERROR_UNDEFINED_CHARACTER
The Unicode character is not defined in the Unicode character set installed on the system.
0x00000248 – ERROR_FLOPPY_VOLUME
The paging file cannot be created on a floppy disk.
0x00000249 – ERROR_BIOS_FAILED_TO_CONNECT_INTERRUPT
The system bios failed to connect a system interrupt to the device or bus for which the device is connected.
0x0000024A – ERROR_BACKUP_CONTROLLER
This operation is only allowed for the primary domain controller (PDC) of the domain.
0x0000024B – ERROR_MUTANT_LIMIT_EXCEEDED
An attempt was made to acquire a mutant such that its maximum count would have been exceeded.
0x0000024C – ERROR_FS_DRIVER_REQUIRED
A volume has been accessed for which a file system driver is required that has not yet been loaded.
0x0000024D – ERROR_CANNOT_LOAD_REGISTRY_FILE
{Registry File Failure} The registry cannot load the hive (file): %hs or its log or alternate. It is corrupt, absent, or not writable.
0x0000024E – ERROR_DEBUG_ATTACH_FAILED
{Unexpected Failure in DebugActiveProcess} An unexpected failure occurred while processing a DebugActiveProcess API request. Choosing OK will terminate the process, and choosing Cancel will ignore the error.
0x0000024F – ERROR_SYSTEM_PROCESS_TERMINATED
{Fatal System Error} The %hs system process terminated unexpectedly with a status of 0x%08x (0x%08x 0x%08x). The system has been shut down.
0x00000250 – ERROR_DATA_NOT_ACCEPTED
{Data Not Accepted} The transport driver interface (TDI) client could not handle the data received during an indication.
0x00000251 – ERROR_VDM_HARD_ERROR
The NT Virtual DOS Machine (NTVDM) encountered a hard error.
0x00000252 – ERROR_DRIVER_CANCEL_TIMEOUT
{Cancel Timeout} The driver %hs failed to complete a canceled I/O request in the allotted time.
0x00000253 – ERROR_REPLY_MESSAGE_MISMATCH
{Reply Message Mismatch} An attempt was made to reply to a local procedure call (LPC) message, but the thread specified by the client ID in the message was not waiting on that message.
0x00000254 – ERROR_LOST_WRITEBEHIND_DATA
{Delayed Write Failed} Windows was unable to save all the data for the file %hs. The data has been lost. This error might be caused by a failure of your computer hardware or network connection. Try to save this file elsewhere.
0x00000255 – ERROR_CLIENT_SERVER_PARAMETERS_INVALID
The parameters passed to the server in the client/server shared memory window were invalid. Too much data might have been put in the shared memory window.
0x00000256 – ERROR_NOT_TINY_STREAM
The stream is not a tiny stream.
0x00000257 – ERROR_STACK_OVERFLOW_READ
The request must be handled by the stack overflow code.
0x00000258 – ERROR_CONVERT_TO_LARGE
Internal OFS status codes indicating how an allocation operation is handled. Either it is retried after the containing onode is moved or the extent stream is converted to a large stream.
0x00000259 – ERROR_FOUND_OUT_OF_SCOPE
The attempt to find the object found an object matching by ID on the volume but it is out of the scope of the handle used for the operation.
0x0000025A – ERROR_ALLOCATE_BUCKET
The bucket array must be grown. Retry transaction after doing so.
0x0000025B – ERROR_MARSHALL_OVERFLOW
The user/kernel marshaling buffer has overflowed.
0x0000025C – ERROR_INVALID_VARIANT
The supplied variant structure contains invalid data.
0x0000025D – ERROR_BAD_COMPRESSION_BUFFER
The specified buffer contains ill-formed data.
0x0000025E – ERROR_AUDIT_FAILED
{Audit Failed} An attempt to generate a security audit failed.
0x0000025F – ERROR_TIMER_RESOLUTION_NOT_SET
The timer resolution was not previously set by the current process.
0x00000260 – ERROR_INSUFFICIENT_LOGON_INFO
There is insufficient account information to log you on.
0x00000261 – ERROR_BAD_DLL_ENTRYPOINT
{Invalid DLL Entrypoint} The dynamic link library %hs is not written correctly. The stack pointer has been left in an inconsistent state. The entry point should be declared as WINAPI or STDCALL. Select YES to fail the DLL load. Select NO to continue execution. Selecting NO can cause the application to operate incorrectly.
0x00000262 – ERROR_BAD_SERVICE_ENTRYPOINT
{Invalid Service Callback Entrypoint} The %hs service is not written correctly. The stack pointer has been left in an inconsistent state. The callback entry point should be declared as WINAPI or STDCALL. Selecting OK will cause the service to continue operation. However, the service process might operate incorrectly.
0x00000263 – ERROR_IP_ADDRESS_CONFLICT1
There is an IP address conflict with another system on the network.
0x00000264 – ERROR_IP_ADDRESS_CONFLICT2
There is an IP address conflict with another system on the network.
0x00000265 – ERROR_REGISTRY_QUOTA_LIMIT
{Low On Registry Space} The system has reached the maximum size allowed for the system part of the registry. Additional storage requests will be ignored.
0x00000266 – ERROR_NO_CALLBACK_ACTIVE
A callback return system service cannot be executed when no callback is active.
0x00000267 – ERROR_PWD_TOO_SHORT
The password provided is too short to meet the policy of your user account. Choose a longer password.
0x00000268 – ERROR_PWD_TOO_RECENT
The policy of your user account does not allow you to change passwords too frequently. This is done to prevent users from changing back to a familiar, but potentially discovered, password. If you feel your password has been compromised, contact your administrator immediately to have a new one assigned.
0x00000269 – ERROR_PWD_HISTORY_CONFLICT
You have attempted to change your password to one that you have used in the past. The policy of your user account does not allow this. Select a password that you have not previously used.
0x0000026A – ERROR_UNSUPPORTED_COMPRESSION
The specified compression format is unsupported.
0x0000026B – ERROR_INVALID_HW_PROFILE
The specified hardware profile configuration is invalid.
0x0000026C – ERROR_INVALID_PLUGPLAY_DEVICE_PATH
The specified Plug and Play registry device path is invalid.
0x0000026D – ERROR_QUOTA_LIST_INCONSISTENT
The specified quota list is internally inconsistent with its descriptor.
0x0000026E – ERROR_EVALUATION_EXPIRATION
{Windows Evaluation Notification} The evaluation period for this installation of Windows has expired. This system will shut down in 1 hour. To restore access to this installation of Windows, upgrade this installation using a licensed distribution of this product.
0x0000026F – ERROR_ILLEGAL_DLL_RELOCATION
{Illegal System DLL Relocation} The system DLL %hs was relocated in memory. The application will not run properly. The relocation occurred because the DLL %hs occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL.
0x00000270 – ERROR_DLL_INIT_FAILED_LOGOFF
{DLL Initialization Failed} The application failed to initialize because the window station is shutting down.
0x00000271 – ERROR_VALIDATE_CONTINUE
The validation process needs to continue on to the next step.
0x00000272 – ERROR_NO_MORE_MATCHES
There are no more matches for the current index enumeration.
0x00000273 – ERROR_RANGE_LIST_CONFLICT
The range could not be added to the range list because of a conflict.
0x00000274 – ERROR_SERVER_SID_MISMATCH
The server process is running under a SID different than that required by the client.
0x00000275 – ERROR_CANT_ENABLE_DENY_ONLY
A group marked use for deny only cannot be enabled.
0x00000276 – ERROR_FLOAT_MULTIPLE_FAULTS
{EXCEPTION} Multiple floating point faults.
0x00000277 – ERROR_FLOAT_MULTIPLE_TRAPS
{EXCEPTION} Multiple floating point traps.
0x00000278 – ERROR_NOINTERFACE
The requested interface is not supported.
0x00000279 – ERROR_DRIVER_FAILED_SLEEP
{System Standby Failed} The driver %hs does not support standby mode. Updating this driver might allow the system to go to standby mode.
0x0000027A – ERROR_CORRUPT_SYSTEM_FILE
The system file %1 has become corrupt and has been replaced.
0x0000027B – ERROR_COMMITMENT_MINIMUM
{Virtual Memory Minimum Too Low} Your system is low on virtual memory. Windows is increasing the size of your virtual memory paging file. During this process, memory requests for some applications might be denied. For more information, see Help.
0x0000027C – ERROR_PNP_RESTART_ENUMERATION
A device was removed so enumeration must be restarted.
0x0000027D – ERROR_SYSTEM_IMAGE_BAD_SIGNATURE
{Fatal System Error} The system image %s is not properly signed. The file has been replaced with the signed file. The system has been shut down.
0x0000027E – ERROR_PNP_REBOOT_REQUIRED
Device will not start without a reboot.
0x0000027F – ERROR_INSUFFICIENT_POWER
There is not enough power to complete the requested operation.
0x00000281 – ERROR_SYSTEM_SHUTDOWN
The system is in the process of shutting down.
0x00000282 – ERROR_PORT_NOT_SET
An attempt to remove a process DebugPort was made, but a port was not already associated with the process.
0x00000283 – ERROR_DS_VERSION_CHECK_FAILURE
This version of Windows is not compatible with the behavior version of directory forest, domain, or domain controller.
0x00000284 – ERROR_RANGE_NOT_FOUND
The specified range could not be found in the range list.
0x00000286 – ERROR_NOT_SAFE_MODE_DRIVER
The driver was not loaded because the system is booting into safe mode.
0x00000287 – ERROR_FAILED_DRIVER_ENTRY
The driver was not loaded because it failed its initialization call.
0x00000288 – ERROR_DEVICE_ENUMERATION_ERROR
The device encountered an error while applying power or reading the device configuration. This might be caused by a failure of your hardware or by a poor connection.
0x00000289 – ERROR_MOUNT_POINT_NOT_RESOLVED
The create operation failed because the name contained at least one mount point that resolves to a volume to which the specified device object is not attached.
0x0000028A – ERROR_INVALID_DEVICE_OBJECT_PARAMETER
The device object parameter is either not a valid device object or is not attached to the volume specified by the file name.
0x0000028B – ERROR_MCA_OCCURED
A machine check error has occurred. Check the system event log for additional information.
0x0000028C – ERROR_DRIVER_DATABASE_ERROR
There was an error [%2] processing the driver database.
0x0000028D – ERROR_SYSTEM_HIVE_TOO_LARGE
The system hive size has exceeded its limit.
0x0000028E – ERROR_DRIVER_FAILED_PRIOR_UNLOAD
The driver could not be loaded because a previous version of the driver is still in memory.
0x0000028F – ERROR_VOLSNAP_PREPARE_HIBERNATE
{Volume Shadow Copy Service} Wait while the Volume Shadow Copy Service prepares volume %hs for hibernation.
0x00000290 – ERROR_HIBERNATION_FAILURE
The system has failed to hibernate (the error code is %hs). Hibernation will be disabled until the system is restarted.
0x00000299 – ERROR_FILE_SYSTEM_LIMITATION
The requested operation could not be completed due to a file system limitation.
0x0000029C – ERROR_ASSERTION_FAILURE
An assertion failure has occurred.
0x0000029D – ERROR_ACPI_ERROR
An error occurred in the Advanced Configuration and Power Interface (ACPI) subsystem.
0x0000029E – ERROR_WOW_ASSERTION
WOW assertion error.
0x0000029F – ERROR_PNP_BAD_MPS_TABLE
A device is missing in the system BIOS MultiProcessor Specification (MPS) table. This device will not be used. Contact your system vendor for system BIOS update.
0x000002A0 – ERROR_PNP_TRANSLATION_FAILED
A translator failed to translate resources.
0x000002A1 – ERROR_PNP_IRQ_TRANSLATION_FAILED
An interrupt request (IRQ) translator failed to translate resources.
0x000002A2 – ERROR_PNP_INVALID_ID
Driver %2 returned invalid ID for a child device (%3).
0x000002A3 – ERROR_WAKE_SYSTEM_DEBUGGER
{Kernel Debugger Awakened} the system debugger was awakened by an interrupt.
0x000002A4 – ERROR_HANDLES_CLOSED
{Handles Closed} Handles to objects have been automatically closed because of the requested operation.
0x000002A5 – ERROR_EXTRANEOUS_INFORMATION
{Too Much Information} The specified ACL contained more information than was expected.
0x000002A6 – ERROR_RXACT_COMMIT_NECESSARY
This warning level status indicates that the transaction state already exists for the registry subtree, but that a transaction commit was previously aborted. The commit has NOT been completed, but it has not been rolled back either (so it can still be committed if desired).
0x000002A7 – ERROR_MEDIA_CHECK
{Media Changed} The media might have changed.
0x000002A8 – ERROR_GUID_SUBSTITUTION_MADE
{GUID Substitution} During the translation of a GUID to a Windows SID, no administratively defined GUID prefix was found. A substitute prefix was used, which will not compromise system security. However, this might provide more restrictive access than intended.
0x000002A9 – ERROR_STOPPED_ON_SYMLINK
The create operation stopped after reaching a symbolic link.
0x000002AA – ERROR_LONGJUMP
A long jump has been executed.
0x000002AB – ERROR_PLUGPLAY_QUERY_VETOED
The Plug and Play query operation was not successful.
0x000002AC – ERROR_UNWIND_CONSOLIDATE
A frame consolidation has been executed.
0x000002AD – ERROR_REGISTRY_HIVE_RECOVERED
{Registry Hive Recovered} Registry hive (file): %hs was corrupted and it has been recovered. Some data might have been lost.
0x000002AE – ERROR_DLL_MIGHT_BE_INSECURE
The application is attempting to run executable code from the module %hs. This might be insecure. An alternative, %hs, is available. Should the application use the secure module %hs?
0x000002AF – ERROR_DLL_MIGHT_BE_INCOMPATIBLE
The application is loading executable code from the module %hs. This is secure, but might be incompatible with previous releases of the operating system. An alternative, %hs, is available. Should the application use the secure module %hs?
0x000002B0 – ERROR_DBG_EXCEPTION_NOT_HANDLED
Debugger did not handle the exception.
0x000002B1 – ERROR_DBG_REPLY_LATER
Debugger will reply later.
0x000002B2 – ERROR_DBG_UNABLE_TO_PROVIDE_HANDLE
Debugger cannot provide handle.
0x000002B3 – ERROR_DBG_TERMINATE_THREAD
Debugger terminated thread.
0x000002B4 – ERROR_DBG_TERMINATE_PROCESS
Debugger terminated process.
0x000002B5 – ERROR_DBG_CONTROL_C
Debugger got control C.
0x000002B6 – ERROR_DBG_PRINTEXCEPTION_C
Debugger printed exception on control C.
0x000002B7 – ERROR_DBG_RIPEXCEPTION
Debugger received Routing Information Protocol (RIP) exception.
0x000002B8 – ERROR_DBG_CONTROL_BREAK
Debugger received control break.
0x000002B9 – ERROR_DBG_COMMAND_EXCEPTION
Debugger command communication exception.
0x000002BA – ERROR_OBJECT_NAME_EXISTS
{Object Exists} An attempt was made to create an object and the object name already existed.
0x000002BB – ERROR_THREAD_WAS_SUSPENDED
{Thread Suspended} A thread termination occurred while the thread was suspended. The thread was resumed and termination proceeded.
0x000002BC – ERROR_IMAGE_NOT_AT_BASE
{Image Relocated} An image file could not be mapped at the address specified in the image file. Local fixes must be performed on this image.
0x000002BD – ERROR_RXACT_STATE_CREATED
This informational level status indicates that a specified registry subtree transaction state did not yet exist and had to be created.
0x000002BE – ERROR_SEGMENT_NOTIFICATION
{Segment Load} A virtual DOS machine (VDM) is loading, unloading, or moving an MS-DOS or Win16 program segment image. An exception is raised so a debugger can load, unload, or track symbols and breakpoints within these 16-bit segments.
0x000002BF – ERROR_BAD_CURRENT_DIRECTORY
{Invalid Current Directory} The process cannot switch to the startup current directory %hs. Select OK to set current directory to %hs, or select CANCEL to exit.
0x000002C0 – ERROR_FT_READ_RECOVERY_FROM_BACKUP
{Redundant Read} To satisfy a read request, the NT fault-tolerant file system successfully read the requested data from a redundant copy. This was done because the file system encountered a failure on a member of the fault-tolerant volume, but it was unable to reassign the failing area of the device.
0x000002C1 – ERROR_FT_WRITE_RECOVERY
{Redundant Write} To satisfy a write request, the Windows NT operating system fault-tolerant file system successfully wrote a redundant copy of the information. This was done because the file system encountered a failure on a member of the fault-tolerant volume, but it was not able to reassign the failing area of the device.
0x000002C2 – ERROR_IMAGE_MACHINE_TYPE_MISMATCH
{Machine Type Mismatch} The image file %hs is valid, but is for a machine type other than the current machine. Select OK to continue, or CANCEL to fail the DLL load.
0x000002C3 – ERROR_RECEIVE_PARTIAL
{Partial Data Received} The network transport returned partial data to its client. The remaining data will be sent later.
0x000002C4 – ERROR_RECEIVE_EXPEDITED
{Expedited Data Received} The network transport returned data to its client that was marked as expedited by the remote system.
0x000002C5 – ERROR_RECEIVE_PARTIAL_EXPEDITED
{Partial Expedited Data Received} The network transport returned partial data to its client and this data was marked as expedited by the remote system. The remaining data will be sent later.
0x000002C6 – ERROR_EVENT_DONE
{TDI Event Done} The TDI indication has completed successfully.
0x000002C7 – ERROR_EVENT_PENDING
{TDI Event Pending} The TDI indication has entered the pending state.
0x000002C8 – ERROR_CHECKING_FILE_SYSTEM
Checking file system on %wZ.
0x000002C9 – ERROR_FATAL_APP_EXIT
{Fatal Application Exit} %hs.
0x000002CA – ERROR_PREDEFINED_HANDLE
The specified registry key is referenced by a predefined handle.
0x000002CB – ERROR_WAS_UNLOCKED
{Page Unlocked} The page protection of a locked page was changed to 'No Access' and the page was unlocked from memory and from the process.
0x000002CD – ERROR_WAS_LOCKED
{Page Locked} One of the pages to lock was already locked.
0x000002CF – ERROR_ALREADY_WIN32
The value already corresponds with a Win 32 error code.
0x000002D0 – ERROR_IMAGE_MACHINE_TYPE_MISMATCH_EXE
{Machine Type Mismatch} The image file %hs is valid, but is for a machine type other than the current machine.
0x000002D1 – ERROR_NO_YIELD_PERFORMED
A yield execution was performed and no thread was available to run.
0x000002D2 – ERROR_TIMER_RESUME_IGNORED
The resume flag to a timer API was ignored.
0x000002D3 – ERROR_ARBITRATION_UNHANDLED
The arbiter has deferred arbitration of these resources to its parent.
0x000002D4 – ERROR_CARDBUS_NOT_SUPPORTED
The inserted CardBus device cannot be started because of a configuration error on %hs"."
0x000002D5 – ERROR_MP_PROCESSOR_MISMATCH
The CPUs in this multiprocessor system are not all the same revision level. To use all processors the operating system restricts itself to the features of the least capable processor in the system. If problems occur with this system, contact the CPU manufacturer to see if this mix of processors is supported.
0x000002D6 – ERROR_HIBERNATED
The system was put into hibernation.
0x000002D7 – ERROR_RESUME_HIBERNATION
The system was resumed from hibernation.
0x000002D8 – ERROR_FIRMWARE_UPDATED
Windows has detected that the system firmware (BIOS) was updated (previous firmware date = %2, current firmware date %3).
0x000002D9 – ERROR_DRIVERS_LEAKING_LOCKED_PAGES
A device driver is leaking locked I/O pages, causing system degradation. The system has automatically enabled a tracking code to try and catch the culprit.
0x000002DA – ERROR_WAKE_SYSTEM
The system has awoken.
0x000002DF – ERROR_ABANDONED_WAIT_0
The call failed because the handle associated with it was closed.
0x000002E4 – ERROR_ELEVATION_REQUIRED
The requested operation requires elevation.
0x000002E5 – ERROR_REPARSE
A reparse should be performed by the object manager because the name of the file resulted in a symbolic link.
0x000002E6 – ERROR_OPLOCK_BREAK_IN_PROGRESS
An open/create operation completed while an oplock break is underway.
0x000002E7 – ERROR_VOLUME_MOUNTED
A new volume has been mounted by a file system.
0x000002E8 – ERROR_RXACT_COMMITTED
This success level status indicates that the transaction state already exists for the registry subtree, but that a transaction commit was previously aborted. The commit has now been completed.
0x000002E9 – ERROR_NOTIFY_CLEANUP
This indicates that a notify change request has been completed due to closing the handle which made the notify change request.
0x000002EA – ERROR_PRIMARY_TRANSPORT_CONNECT_FAILED
{Connect Failure on Primary Transport} An attempt was made to connect to the remote server %hs on the primary transport, but the connection failed. The computer was able to connect on a secondary transport.
0x000002EB – ERROR_PAGE_FAULT_TRANSITION
Page fault was a transition fault.
0x000002EC – ERROR_PAGE_FAULT_DEMAND_ZERO
Page fault was a demand zero fault.
0x000002ED – ERROR_PAGE_FAULT_COPY_ON_WRITE
Page fault was a demand zero fault.
0x000002EE – ERROR_PAGE_FAULT_GUARD_PAGE
Page fault was a demand zero fault.
0x000002EF – ERROR_PAGE_FAULT_PAGING_FILE
Page fault was satisfied by reading from a secondary storage device.
0x000002F0 – ERROR_CACHE_PAGE_LOCKED
Cached page was locked during operation.
0x000002F1 – ERROR_CRASH_DUMP
Crash dump exists in paging file.
0x000002F2 – ERROR_BUFFER_ALL_ZEROS
Specified buffer contains all zeros.
0x000002F3 – ERROR_REPARSE_OBJECT
A reparse should be performed by the object manager because the name of the file resulted in a symbolic link.
0x000002F4 – ERROR_RESOURCE_REQUIREMENTS_CHANGED
The device has succeeded a query-stop and its resource requirements have changed.
0x000002F5 – ERROR_TRANSLATION_COMPLETE
The translator has translated these resources into the global space and no further translations should be performed.
0x000002F6 – ERROR_NOTHING_TO_TERMINATE
A process being terminated has no threads to terminate.
0x000002F7 – ERROR_PROCESS_NOT_IN_JOB
The specified process is not part of a job.
0x000002F8 – ERROR_PROCESS_IN_JOB
The specified process is part of a job.
0x000002F9 – ERROR_VOLSNAP_HIBERNATE_READY
{Volume Shadow Copy Service} The system is now ready for hibernation.
0x000002FA – ERROR_FSFILTER_OP_COMPLETED_SUCCESSFULLY
A file system or file system filter driver has successfully completed an FsFilter operation.
0x000002FB – ERROR_INTERRUPT_VECTOR_ALREADY_CONNECTED
The specified interrupt vector was already connected.
0x000002FC – ERROR_INTERRUPT_STILL_CONNECTED
The specified interrupt vector is still connected.
0x000002FD – ERROR_WAIT_FOR_OPLOCK
An operation is blocked waiting for an oplock.
0x000002FE – ERROR_DBG_EXCEPTION_HANDLED
Debugger handled exception.
0x000002FF – ERROR_DBG_CONTINUE
Debugger continued.
0x00000300 – ERROR_CALLBACK_POP_STACK
An exception occurred in a user mode callback and the kernel callback frame should be removed.
0x00000301 – ERROR_COMPRESSION_DISABLED
Compression is disabled for this volume.
0x00000302 – ERROR_CANTFETCHBACKWARDS
The data provider cannot fetch backward through a result set.
0x00000303 – ERROR_CANTSCROLLBACKWARDS
The data provider cannot scroll backward through a result set.
0x00000304 – ERROR_ROWSNOTRELEASED
The data provider requires that previously fetched data is released before asking for more data.
0x00000305 – ERROR_BAD_ACCESSOR_FLAGS
The data provider was not able to interpret the flags set for a column binding in an accessor.
0x00000306 – ERROR_ERRORS_ENCOUNTERED
One or more errors occurred while processing the request.
0x00000307 – ERROR_NOT_CAPABLE
The implementation is not capable of performing the request.
0x00000308 – ERROR_REQUEST_OUT_OF_SEQUENCE
The client of a component requested an operation that is not valid given the state of the component instance.
0x00000309 – ERROR_VERSION_PARSE_ERROR
A version number could not be parsed.
0x0000030A – ERROR_BADSTARTPOSITION
The iterator's start position is invalid.
0x0000030B – ERROR_MEMORY_HARDWARE
The hardware has reported an uncorrectable memory error.
0x0000030C – ERROR_DISK_REPAIR_DISABLED
The attempted operation required self-healing to be enabled.
0x0000030D – ERROR_INSUFFICIENT_RESOURCE_FOR_SPECIFIED_SHARED_SECTION_SIZE
The Desktop heap encountered an error while allocating session memory. There is more information in the system event log.
0x0000030E – ERROR_SYSTEM_POWERSTATE_TRANSITION
The system power state is transitioning from %2 to %3.
0x0000030F – ERROR_SYSTEM_POWERSTATE_COMPLEX_TRANSITION
The system power state is transitioning from %2 to %3 but could enter %4.
0x00000310 – ERROR_MCA_EXCEPTION
A thread is getting dispatched with MCA EXCEPTION because of MCA.
0x00000311 – ERROR_ACCESS_AUDIT_BY_POLICY
Access to %1 is monitored by policy rule %2.
0x00000312 – ERROR_ACCESS_DISABLED_NO_SAFER_UI_BY_POLICY
Access to %1 has been restricted by your administrator by policy rule %2.
0x00000313 – ERROR_ABANDON_HIBERFILE
A valid hibernation file has been invalidated and should be abandoned.
0x00000314 – ERROR_LOST_WRITEBEHIND_DATA_NETWORK_DISCONNECTED
{Delayed Write Failed} Windows was unable to save all the data for the file %hs; the data has been lost. This error can be caused by network connectivity issues. Try to save this file elsewhere.
0x00000315 – ERROR_LOST_WRITEBEHIND_DATA_NETWORK_SERVER_ERROR
{Delayed Write Failed} Windows was unable to save all the data for the file %hs; the data has been lost. This error was returned by the server on which the file exists. Try to save this file elsewhere.
0x00000316 – ERROR_LOST_WRITEBEHIND_DATA_LOCAL_DISK_ERROR
{Delayed Write Failed} Windows was unable to save all the data for the file %hs; the data has been lost. This error can be caused if the device has been removed or the media is write-protected.
0x000003E2 – ERROR_EA_ACCESS_DENIED
Access to the extended attribute was denied.
0x000003E3 – ERROR_OPERATION_ABORTED
The I/O operation has been aborted because of either a thread exit or an application request.
0x000003E4 – ERROR_IO_INCOMPLETE
Overlapped I/O event is not in a signaled state.
0x000003E5 – ERROR_IO_PENDING
Overlapped I/O operation is in progress.
0x000003E6 – ERROR_NOACCESS
Invalid access to memory location.
0x000003E7 – ERROR_SWAPERROR
Error performing in-page operation.
0x000003E9 – ERROR_STACK_OVERFLOW
Recursion too deep; the stack overflowed.
0x000003EA – ERROR_INVALID_MESSAGE
The window cannot act on the sent message.
0x000003EB – ERROR_CAN_NOT_COMPLETE
Cannot complete this function.
0x000003EC – ERROR_INVALID_FLAGS
Invalid flags.
0x000003ED – ERROR_UNRECOGNIZED_VOLUME
The volume does not contain a recognized file system. Be sure that all required file system drivers are loaded and that the volume is not corrupted.
0x000003EE – ERROR_FILE_INVALID
The volume for a file has been externally altered so that the opened file is no longer valid.
0x000003EF – ERROR_FULLSCREEN_MODE
The requested operation cannot be performed in full-screen mode.
0x000003F0 – ERROR_NO_TOKEN
An attempt was made to reference a token that does not exist.
0x000003F1 – ERROR_BADDB
The configuration registry database is corrupt.
0x000003F2 – ERROR_BADKEY
The configuration registry key is invalid.
0x000003F3 – ERROR_CANTOPEN
The configuration registry key could not be opened.
0x000003F4 – ERROR_CANTREAD
The configuration registry key could not be read.
0x000003F5 – ERROR_CANTWRITE
The configuration registry key could not be written.
0x000003F6 – ERROR_REGISTRY_RECOVERED
One of the files in the registry database had to be recovered by use of a log or alternate copy. The recovery was successful.
0x000003F7 – ERROR_REGISTRY_CORRUPT
The registry is corrupted. The structure of one of the files containing registry data is corrupted, or the system's memory image of the file is corrupted, or the file could not be recovered because the alternate copy or log was absent or corrupted.
0x000003F8 – ERROR_REGISTRY_IO_FAILED
An I/O operation initiated by the registry failed and cannot be recovered. The registry could not read in, write out, or flush one of the files that contain the system's image of the registry.
0x000003F9 – ERROR_NOT_REGISTRY_FILE
The system attempted to load or restore a file into the registry, but the specified file is not in a registry file format.
0x000003FA – ERROR_KEY_DELETED
Illegal operation attempted on a registry key that has been marked for deletion.
0x000003FB – ERROR_NO_LOG_SPACE
System could not allocate the required space in a registry log.
0x000003FC – ERROR_KEY_HAS_CHILDREN
Cannot create a symbolic link in a registry key that already has subkeys or values.
0x000003FD – ERROR_CHILD_MUST_BE_VOLATILE
Cannot create a stable subkey under a volatile parent key.
0x000003FE – ERROR_NOTIFY_ENUM_DIR
A notify change request is being completed and the information is not being returned in the caller's buffer. The caller now needs to enumerate the files to find the changes.
0x0000041B – ERROR_DEPENDENT_SERVICES_RUNNING
A stop control has been sent to a service that other running services are dependent on.
0x0000041C – ERROR_INVALID_SERVICE_CONTROL
The requested control is not valid for this service.
0x0000041D – ERROR_SERVICE_REQUEST_TIMEOUT
The service did not respond to the start or control request in a timely fashion.
0x0000041E – ERROR_SERVICE_NO_THREAD
A thread could not be created for the service.
0x0000041F – ERROR_SERVICE_DATABASE_LOCKED
The service database is locked.
0x00000420 – ERROR_SERVICE_ALREADY_RUNNING
An instance of the service is already running.
0x00000421 – ERROR_INVALID_SERVICE_ACCOUNT
The account name is invalid or does not exist, or the password is invalid for the account name specified.
0x00000422 – ERROR_SERVICE_DISABLED
The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.
0x00000423 – ERROR_CIRCULAR_DEPENDENCY
Circular service dependency was specified.
0x00000424 – ERROR_SERVICE_DOES_NOT_EXIST
The specified service does not exist as an installed service.
0x00000425 – ERROR_SERVICE_CANNOT_ACCEPT_CTRL
The service cannot accept control messages at this time.
0x00000426 – ERROR_SERVICE_NOT_ACTIVE
The service has not been started.
0x00000427 – ERROR_FAILED_SERVICE_CONTROLLER_CONNECT
The service process could not connect to the service controller.
0x00000428 – ERROR_EXCEPTION_IN_SERVICE
An exception occurred in the service when handling the control request.
0x00000429 – ERROR_DATABASE_DOES_NOT_EXIST
The database specified does not exist.
0x0000042A – ERROR_SERVICE_SPECIFIC_ERROR
The service has returned a service-specific error code.
0x0000042B – ERROR_PROCESS_ABORTED
The process terminated unexpectedly.
0x0000042C – ERROR_SERVICE_DEPENDENCY_FAIL
The dependency service or group failed to start.
0x0000042D – ERROR_SERVICE_LOGON_FAILED
The service did not start due to a logon failure.
0x0000042E – ERROR_SERVICE_START_HANG
After starting, the service stopped responding in a start-pending state.
0x0000042F – ERROR_INVALID_SERVICE_LOCK
The specified service database lock is invalid.
0x00000430 – ERROR_SERVICE_MARKED_FOR_DELETE
The specified service has been marked for deletion.
0x00000431 – ERROR_SERVICE_EXISTS
The specified service already exists.
0x00000432 – ERROR_ALREADY_RUNNING_LKG
The system is currently running with the last-known-good configuration.
0x00000433 – ERROR_SERVICE_DEPENDENCY_DELETED
The dependency service does not exist or has been marked for deletion.
0x00000434 – ERROR_BOOT_ALREADY_ACCEPTED
The current boot has already been accepted for use as the last-known-good control set.
0x00000435 – ERROR_SERVICE_NEVER_STARTED
No attempts to start the service have been made since the last boot.
0x00000436 – ERROR_DUPLICATE_SERVICE_NAME
The name is already in use as either a service name or a service display name.
0x00000437 – ERROR_DIFFERENT_SERVICE_ACCOUNT
The account specified for this service is different from the account specified for other services running in the same process.
0x00000438 – ERROR_CANNOT_DETECT_DRIVER_FAILURE
Failure actions can only be set for Win32 services, not for drivers.
0x00000439 – ERROR_CANNOT_DETECT_PROCESS_ABORT
This service runs in the same process as the service control manager. Therefore, the service control manager cannot take action if this service's process terminates unexpectedly.
0x0000043A – ERROR_NO_RECOVERY_PROGRAM
No recovery program has been configured for this service.
0x0000043B – ERROR_SERVICE_NOT_IN_EXE
The executable program that this service is configured to run in does not implement the service.
0x0000043C – ERROR_NOT_SAFEBOOT_SERVICE
This service cannot be started in Safe Mode.
0x0000044C – ERROR_END_OF_MEDIA
The physical end of the tape has been reached.
0x0000044D – ERROR_FILEMARK_DETECTED
A tape access reached a filemark.
0x0000044E – ERROR_BEGINNING_OF_MEDIA
The beginning of the tape or a partition was encountered.
0x0000044F – ERROR_SETMARK_DETECTED
A tape access reached the end of a set of files.
0x00000450 – ERROR_NO_DATA_DETECTED
No more data is on the tape.
0x00000451 – ERROR_PARTITION_FAILURE
Tape could not be partitioned.
0x00000452 – ERROR_INVALID_BLOCK_LENGTH
When accessing a new tape of a multivolume partition, the current block size is incorrect.
0x00000453 – ERROR_DEVICE_NOT_PARTITIONED
Tape partition information could not be found when loading a tape.
0x00000454 – ERROR_UNABLE_TO_LOCK_MEDIA
Unable to lock the media eject mechanism.
0x00000455 – ERROR_UNABLE_TO_UNLOAD_MEDIA
Unable to unload the media.
0x00000456 – ERROR_MEDIA_CHANGED
The media in the drive might have changed.
0x00000457 – ERROR_BUS_RESET
The I/O bus was reset.
0x00000458 – ERROR_NO_MEDIA_IN_DRIVE
No media in drive.
0x00000459 – ERROR_NO_UNICODE_TRANSLATION
No mapping for the Unicode character exists in the target multibyte code page.
0x0000045A – ERROR_DLL_INIT_FAILED
A DLL initialization routine failed.
0x0000045B – ERROR_SHUTDOWN_IN_PROGRESS
A system shutdown is in progress.
0x0000045C – ERROR_NO_SHUTDOWN_IN_PROGRESS
Unable to abort the system shutdown because no shutdown was in progress.
0x0000045D – ERROR_IO_DEVICE
The request could not be performed because of an I/O device error.
0x0000045E – ERROR_SERIAL_NO_DEVICE
No serial device was successfully initialized. The serial driver will unload.
0x0000045F – ERROR_IRQ_BUSY
Unable to open a device that was sharing an IRQ with other devices. At least one other device that uses that IRQ was already opened.
0x00000460 – ERROR_MORE_WRITES
A serial I/O operation was completed by another write to the serial port. (The IOCTL_SERIAL_XOFF_COUNTER reached zero.)
0x00000461 – ERROR_COUNTER_TIMEOUT
A serial I/O operation completed because the time-out period expired. (The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.)
0x00000462 – ERROR_FLOPPY_ID_MARK_NOT_FOUND
No ID address mark was found on the floppy disk.
0x00000463 – ERROR_FLOPPY_WRONG_CYLINDER
Mismatch between the floppy disk sector ID field and the floppy disk controller track address.
0x00000464 – ERROR_FLOPPY_UNKNOWN_ERROR
The floppy disk controller reported an error that is not recognized by the floppy disk driver.
0x00000465 – ERROR_FLOPPY_BAD_REGISTERS
The floppy disk controller returned inconsistent results in its registers.
0x00000466 – ERROR_DISK_RECALIBRATE_FAILED
While accessing the hard disk, a recalibrate operation failed, even after retries.
0x00000467 – ERROR_DISK_OPERATION_FAILED
While accessing the hard disk, a disk operation failed even after retries.
0x00000468 – ERROR_DISK_RESET_FAILED
While accessing the hard disk, a disk controller reset was needed, but that also failed.
0x00000469 – ERROR_EOM_OVERFLOW
Physical end of tape encountered.
0x0000046A – ERROR_NOT_ENOUGH_SERVER_MEMORY
Not enough server storage is available to process this command.
0x0000046B – ERROR_POSSIBLE_DEADLOCK
A potential deadlock condition has been detected.
0x0000046C – ERROR_MAPPED_ALIGNMENT
The base address or the file offset specified does not have the proper alignment.
0x00000474 – ERROR_SET_POWER_STATE_VETOED
An attempt to change the system power state was vetoed by another application or driver.
0x00000475 – ERROR_SET_POWER_STATE_FAILED
The system BIOS failed an attempt to change the system power state.
0x00000476 – ERROR_TOO_MANY_LINKS
An attempt was made to create more links on a file than the file system supports.
0x0000047E – ERROR_OLD_WIN_VERSION
The specified program requires a newer version of Windows.
0x0000047F – ERROR_APP_WRONG_OS
The specified program is not a Windows or MS-DOS program.
0x00000480 – ERROR_SINGLE_INSTANCE_APP
Cannot start more than one instance of the specified program.
0x00000481 – ERROR_RMODE_APP
The specified program was written for an earlier version of Windows.
0x00000482 – ERROR_INVALID_DLL
One of the library files needed to run this application is damaged.
0x00000483 – ERROR_NO_ASSOCIATION
No application is associated with the specified file for this operation.
0x00000484 – ERROR_DDE_FAIL
An error occurred in sending the command to the application.
0x00000485 – ERROR_DLL_NOT_FOUND
One of the library files needed to run this application cannot be found.
0x00000486 – ERROR_NO_MORE_USER_HANDLES
The current process has used all of its system allowance of handles for Windows manager objects.
0x00000487 – ERROR_MESSAGE_SYNC_ONLY
The message can be used only with synchronous operations.
0x00000488 – ERROR_SOURCE_ELEMENT_EMPTY
The indicated source element has no media.
0x00000489 – ERROR_DESTINATION_ELEMENT_FULL
The indicated destination element already contains media.
0x0000048A – ERROR_ILLEGAL_ELEMENT_ADDRESS
The indicated element does not exist.
0x0000048B – ERROR_MAGAZINE_NOT_PRESENT
The indicated element is part of a magazine that is not present.
0x0000048C – ERROR_DEVICE_REINITIALIZATION_NEEDED
The indicated device requires re-initialization due to hardware errors.
0x0000048D – ERROR_DEVICE_REQUIRES_CLEANING
The device has indicated that cleaning is required before further operations are attempted.
0x0000048E – ERROR_DEVICE_DOOR_OPEN
The device has indicated that its door is open.
0x0000048F – ERROR_DEVICE_NOT_CONNECTED
The device is not connected.
0x00000490 – ERROR_NOT_FOUND
Element not found.
0x00000491 – ERROR_NO_MATCH
There was no match for the specified key in the index.
0x00000492 – ERROR_SET_NOT_FOUND
The property set specified does not exist on the object.
0x00000493 – ERROR_POINT_NOT_FOUND
The point passed to GetMouseMovePoints is not in the buffer.
0x00000494 – ERROR_NO_TRACKING_SERVICE
The tracking (workstation) service is not running.
0x00000495 – ERROR_NO_VOLUME_ID
The volume ID could not be found.
0x00000497 – ERROR_UNABLE_TO_REMOVE_REPLACED
Unable to remove the file to be replaced.
0x00000498 – ERROR_UNABLE_TO_MOVE_REPLACEMENT
Unable to move the replacement file to the file to be replaced. The file to be replaced has retained its original name.
0x00000499 – ERROR_UNABLE_TO_MOVE_REPLACEMENT_2
Unable to move the replacement file to the file to be replaced. The file to be replaced has been renamed using the backup name.
0x0000049A – ERROR_JOURNAL_DELETE_IN_PROGRESS
The volume change journal is being deleted.
0x0000049B – ERROR_JOURNAL_NOT_ACTIVE
The volume change journal is not active.
0x0000049C – ERROR_POTENTIAL_FILE_FOUND
A file was found, but it might not be the correct file.
0x0000049D – ERROR_JOURNAL_ENTRY_DELETED
The journal entry has been deleted from the journal.
0x000004A6 – ERROR_SHUTDOWN_IS_SCHEDULED
A system shutdown has already been scheduled.
0x000004A7 – ERROR_SHUTDOWN_USERS_LOGGED_ON
The system shutdown cannot be initiated because there are other users logged on to the computer.
0x000004B0 – ERROR_BAD_DEVICE
The specified device name is invalid.
0x000004B1 – ERROR_CONNECTION_UNAVAIL
The device is not currently connected but it is a remembered connection.
0x000004B2 – ERROR_DEVICE_ALREADY_REMEMBERED
The local device name has a remembered connection to another network resource.
0x000004B3 – ERROR_NO_NET_OR_BAD_PATH
The network path was either typed incorrectly, does not exist, or the network provider is not currently available. Try retyping the path or contact your network administrator.
0x000004B4 – ERROR_BAD_PROVIDER
The specified network provider name is invalid.
0x000004B5 – ERROR_CANNOT_OPEN_PROFILE
Unable to open the network connection profile.
0x000004B6 – ERROR_BAD_PROFILE
The network connection profile is corrupted.
0x000004B7 – ERROR_NOT_CONTAINER
Cannot enumerate a noncontainer.
0x000004B8 – ERROR_EXTENDED_ERROR
An extended error has occurred.
0x000004B9 – ERROR_INVALID_GROUPNAME
The format of the specified group name is invalid.
0x000004BA – ERROR_INVALID_COMPUTERNAME
The format of the specified computer name is invalid.
0x000004BB – ERROR_INVALID_EVENTNAME
The format of the specified event name is invalid.
0x000004BC – ERROR_INVALID_DOMAINNAME
The format of the specified domain name is invalid.
0x000004BD – ERROR_INVALID_SERVICENAME
The format of the specified service name is invalid.
0x000004BE – ERROR_INVALID_NETNAME
The format of the specified network name is invalid.
0x000004BF – ERROR_INVALID_SHARENAME
The format of the specified share name is invalid.
0x000004C0 – ERROR_INVALID_PASSWORDNAME
The format of the specified password is invalid.
0x000004C1 – ERROR_INVALID_MESSAGENAME
The format of the specified message name is invalid.
0x000004C2 – ERROR_INVALID_MESSAGEDEST
The format of the specified message destination is invalid.
0x000004C3 – ERROR_SESSION_CREDENTIAL_CONFLICT
Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again.
0x000004C4 – ERROR_REMOTE_SESSION_LIMIT_EXCEEDED
An attempt was made to establish a session to a network server, but there are already too many sessions established to that server.
0x000004C5 – ERROR_DUP_DOMAINNAME
The workgroup or domain name is already in use by another computer on the network.
0x000004C6 – ERROR_NO_NETWORK
The network is not present or not started.
0x000004C7 – ERROR_CANCELLED
The operation was canceled by the user.
0x000004C8 – ERROR_USER_MAPPED_FILE
The requested operation cannot be performed on a file with a user-mapped section open.
0x000004C9 – ERROR_CONNECTION_REFUSED
The remote system refused the network connection.
0x000004CA – ERROR_GRACEFUL_DISCONNECT
The network connection was gracefully closed.
0x000004CB – ERROR_ADDRESS_ALREADY_ASSOCIATED
The network transport endpoint already has an address associated with it.
0x000004CC – ERROR_ADDRESS_NOT_ASSOCIATED
An address has not yet been associated with the network endpoint.
0x000004CD – ERROR_CONNECTION_INVALID
An operation was attempted on a nonexistent network connection.
0x000004CE – ERROR_CONNECTION_ACTIVE
An invalid operation was attempted on an active network connection.
0x000004CF – ERROR_NETWORK_UNREACHABLE
The network location cannot be reached. For information about network troubleshooting, see Windows Help.
0x000004D0 – ERROR_HOST_UNREACHABLE
The network location cannot be reached. For information about network troubleshooting, see Windows Help.
0x000004D1 – ERROR_PROTOCOL_UNREACHABLE
The network location cannot be reached. For information about network troubleshooting, see Windows Help.
0x000004D2 – ERROR_PORT_UNREACHABLE
No service is operating at the destination network endpoint on the remote system.
0x000004D3 – ERROR_REQUEST_ABORTED
The request was aborted.
0x000004D4 – ERROR_CONNECTION_ABORTED
The network connection was aborted by the local system.
0x000004D5 – ERROR_RETRY
The operation could not be completed. A retry should be performed.
0x000004D6 – ERROR_CONNECTION_COUNT_LIMIT
A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached.
0x000004D7 – ERROR_LOGIN_TIME_RESTRICTION
Attempting to log on during an unauthorized time of day for this account.
0x000004D8 – ERROR_LOGIN_WKSTA_RESTRICTION
The account is not authorized to log on from this station.
0x000004D9 – ERROR_INCORRECT_ADDRESS
The network address could not be used for the operation requested.
0x000004DA – ERROR_ALREADY_REGISTERED
The service is already registered.
0x000004DB – ERROR_SERVICE_NOT_FOUND
The specified service does not exist.
0x000004DC – ERROR_NOT_AUTHENTICATED
The operation being requested was not performed because the user has not been authenticated.
0x000004DD – ERROR_NOT_LOGGED_ON
The operation being requested was not performed because the user has not logged on to the network. The specified service does not exist.
0x000004DE – ERROR_CONTINUE
Continue with work in progress.
0x000004DF – ERROR_ALREADY_INITIALIZED
An attempt was made to perform an initialization operation when initialization has already been completed.
0x000004E0 – ERROR_NO_MORE_DEVICES
No more local devices.
0x000004E1 – ERROR_NO_SUCH_SITE
The specified site does not exist.
0x000004E2 – ERROR_DOMAIN_CONTROLLER_EXISTS
A domain controller with the specified name already exists.
0x000004E3 – ERROR_ONLY_IF_CONNECTED
This operation is supported only when you are connected to the server.
0x000004E4 – ERROR_OVERRIDE_NOCHANGES
The group policy framework should call the extension even if there are no changes.
0x000004E5 – ERROR_BAD_USER_PROFILE
The specified user does not have a valid profile.
0x000004E6 – ERROR_NOT_SUPPORTED_ON_SBS
This operation is not supported on a computer running Windows Server 2003 operating system for Small Business Server.
0x000004E7 – ERROR_SERVER_SHUTDOWN_IN_PROGRESS
The server machine is shutting down.
0x000004E8 – ERROR_HOST_DOWN
The remote system is not available. For information about network troubleshooting, see Windows Help.
0x000004E9 – ERROR_NON_ACCOUNT_SID
The security identifier provided is not from an account domain.
0x000004EA – ERROR_NON_DOMAIN_SID
The security identifier provided does not have a domain component.
0x000004EB – ERROR_APPHELP_BLOCK
AppHelp dialog canceled, thus preventing the application from starting.
0x000004EC – ERROR_ACCESS_DISABLED_BY_POLICY
This program is blocked by Group Policy. For more information, contact your system administrator.
0x000004ED – ERROR_REG_NAT_CONSUMPTION
A program attempt to use an invalid register value. Normally caused by an uninitialized register. This error is Itanium specific.
0x000004EE – ERROR_CSCSHARE_OFFLINE
The share is currently offline or does not exist.
0x000004EF – ERROR_PKINIT_FAILURE
The Kerberos protocol encountered an error while validating the KDC certificate during smartcard logon. There is more information in the system event log.
0x000004F0 – ERROR_SMARTCARD_SUBSYSTEM_FAILURE
The Kerberos protocol encountered an error while attempting to utilize the smartcard subsystem.
0x000004F1 – ERROR_DOWNGRADE_DETECTED
The system detected a possible attempt to compromise security. Ensure that you can contact the server that authenticated you.
0x000004F7 – ERROR_MACHINE_LOCKED
The machine is locked and cannot be shut down without the force option.
0x000004F9 – ERROR_CALLBACK_SUPPLIED_INVALID_DATA
An application-defined callback gave invalid data when called.
0x000004FA – ERROR_SYNC_FOREGROUND_REFRESH_REQUIRED
The Group Policy framework should call the extension in the synchronous foreground policy refresh.
0x000004FB – ERROR_DRIVER_BLOCKED
This driver has been blocked from loading.
0x000004FC – ERROR_INVALID_IMPORT_OF_NON_DLL
A DLL referenced a module that was neither a DLL nor the process's executable image.
0x000004FD – ERROR_ACCESS_DISABLED_WEBBLADE
Windows cannot open this program because it has been disabled.
0x000004FE – ERROR_ACCESS_DISABLED_WEBBLADE_TAMPER
Windows cannot open this program because the license enforcement system has been tampered with or become corrupted.
0x000004FF – ERROR_RECOVERY_FAILURE
A transaction recover failed.
0x00000500 – ERROR_ALREADY_FIBER
The current thread has already been converted to a fiber.
0x00000501 – ERROR_ALREADY_THREAD
The current thread has already been converted from a fiber.
0x00000502 – ERROR_STACK_BUFFER_OVERRUN
The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
0x00000503 – ERROR_PARAMETER_QUOTA_EXCEEDED
Data present in one of the parameters is more than the function can operate on.
0x00000504 – ERROR_DEBUGGER_INACTIVE
An attempt to perform an operation on a debug object failed because the object is in the process of being deleted.
0x00000505 – ERROR_DELAY_LOAD_FAILED
An attempt to delay-load a .dll or get a function address in a delay-loaded .dll failed.
0x00000506 – ERROR_VDM_DISALLOWED
%1 is a 16-bit application. You do not have permissions to execute 16-bit applications. Check your permissions with your system administrator.
0x00000507 – ERROR_UNIDENTIFIED_ERROR
Insufficient information exists to identify the cause of failure.
0x00000508 – ERROR_INVALID_CRUNTIME_PARAMETER
The parameter passed to a C runtime function is incorrect.
0x00000509 – ERROR_BEYOND_VDL
The operation occurred beyond the valid data length of the file.
0x0000050A – ERROR_INCOMPATIBLE_SERVICE_SID_TYPE
The service start failed because one or more services in the same process have an incompatible service SID type setting. A service with a restricted service SID type can only coexist in the same process with other services with a restricted SID type.
0x0000050B – ERROR_DRIVER_PROCESS_TERMINATED
The process hosting the driver for this device has been terminated.
0x0000050C – ERROR_IMPLEMENTATION_LIMIT
An operation attempted to exceed an implementation-defined limit.
0x0000050D – ERROR_PROCESS_IS_PROTECTED
Either the target process, or the target thread's containing process, is a protected process.
0x0000050E – ERROR_SERVICE_NOTIFY_CLIENT_LAGGING
The service notification client is lagging too far behind the current state of services in the machine.
0x0000050F – ERROR_DISK_QUOTA_EXCEEDED
An operation failed because the storage quota was exceeded.
0x00000510 – ERROR_CONTENT_BLOCKED
An operation failed because the content was blocked.
0x00000511 – ERROR_INCOMPATIBLE_SERVICE_PRIVILEGE
A privilege that the service requires to function properly does not exist in the service account configuration. The Services Microsoft Management Console (MMC) snap-in (Services.msc) and the Local Security Settings MMC snap-in (Secpol.msc) can be used to view the service configuration and the account configuration.
0x00000513 – ERROR_INVALID_LABEL
Indicates a particular SID cannot be assigned as the label of an object.
0x00000514 – ERROR_NOT_ALL_ASSIGNED
Not all privileges or groups referenced are assigned to the caller.
0x00000515 – ERROR_SOME_NOT_MAPPED
Some mapping between account names and SIDs was not done.
0x00000516 – ERROR_NO_QUOTAS_FOR_ACCOUNT
No system quota limits are specifically set for this account.
0x00000517 – ERROR_LOCAL_USER_SESSION_KEY
No encryption key is available. A well-known encryption key was returned.
0x00000518 – ERROR_NULL_LM_PASSWORD
The password is too complex to be converted to a LAN Manager password. The LAN Manager password returned is a null string.
0x00000519 – ERROR_UNKNOWN_REVISION
The revision level is unknown.
0x0000051A – ERROR_REVISION_MISMATCH
Indicates two revision levels are incompatible.
0x0000051B – ERROR_INVALID_OWNER
This SID cannot be assigned as the owner of this object.
0x0000051C – ERROR_INVALID_PRIMARY_GROUP
This SID cannot be assigned as the primary group of an object.
0x0000051D – ERROR_NO_IMPERSONATION_TOKEN
An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client.
0x0000051E – ERROR_CANT_DISABLE_MANDATORY
The group cannot be disabled.
0x0000051F – ERROR_NO_LOGON_SERVERS
There are currently no logon servers available to service the logon request.
0x00000520 – ERROR_NO_SUCH_LOGON_SESSION
A specified logon session does not exist. It might already have been terminated.
0x00000521 – ERROR_NO_SUCH_PRIVILEGE
A specified privilege does not exist.
0x00000522 – ERROR_PRIVILEGE_NOT_HELD
A required privilege is not held by the client.
0x00000523 – ERROR_INVALID_ACCOUNT_NAME
The name provided is not a properly formed account name.
0x00000524 – ERROR_USER_EXISTS
The specified account already exists.
0x00000525 – ERROR_NO_SUCH_USER
The specified account does not exist.
0x00000526 – ERROR_GROUP_EXISTS
The specified group already exists.
0x00000527 – ERROR_NO_SUCH_GROUP
The specified group does not exist.
0x00000528 – ERROR_MEMBER_IN_GROUP
Either the specified user account is already a member of the specified group, or the specified group cannot be deleted because it contains a member.
0x00000529 – ERROR_MEMBER_NOT_IN_GROUP
The specified user account is not a member of the specified group account.
0x0000052A – ERROR_LAST_ADMIN
The last remaining administration account cannot be disabled or deleted.
0x0000052B – ERROR_WRONG_PASSWORD
Unable to update the password. The value provided as the current password is incorrect.
0x0000052C – ERROR_ILL_FORMED_PASSWORD
Unable to update the password. The value provided for the new password contains values that are not allowed in passwords.
0x0000052D – ERROR_PASSWORD_RESTRICTION
Unable to update the password. The value provided for the new password does not meet the length, complexity, or history requirements of the domain.
0x0000052E – ERROR_LOGON_FAILURE
Logon failure: Unknown user name or bad password.
0x0000052F – ERROR_ACCOUNT_RESTRICTION
Logon failure: User account restriction. Possible reasons are blank passwords not allowed, logon hour restrictions, or a policy restriction has been enforced.
0x00000530 – ERROR_INVALID_LOGON_HOURS
Logon failure: Account logon time restriction violation.
0x00000531 – ERROR_INVALID_WORKSTATION
Logon failure: User not allowed to log on to this computer.
0x00000532 – ERROR_PASSWORD_EXPIRED
Logon failure: The specified account password has expired.
0x00000533 – ERROR_ACCOUNT_DISABLED
Logon failure: Account currently disabled.
0x00000534 – ERROR_NONE_MAPPED
No mapping between account names and SIDs was done.
0x00000535 – ERROR_TOO_MANY_LUIDS_REQUESTED
Too many local user identifiers (LUIDs) were requested at one time.
0x00000536 – ERROR_LUIDS_EXHAUSTED
No more LUIDs are available.
0x00000537 – ERROR_INVALID_SUB_AUTHORITY
The sub-authority part of an SID is invalid for this particular use.
0x00000538 – ERROR_INVALID_ACL
The ACL structure is invalid.
0x00000539 – ERROR_INVALID_SID
The SID structure is invalid.
0x0000053A – ERROR_INVALID_SECURITY_DESCR
The security descriptor structure is invalid.
0x0000053C – ERROR_BAD_INHERITANCE_ACL
The inherited ACL or ACE could not be built.
0x0000053D – ERROR_SERVER_DISABLED
The server is currently disabled.
0x0000053E – ERROR_SERVER_NOT_DISABLED
The server is currently enabled.
0x0000053F – ERROR_INVALID_ID_AUTHORITY
The value provided was an invalid value for an identifier authority.
0x00000540 – ERROR_ALLOTTED_SPACE_EXCEEDED
No more memory is available for security information updates.
0x00000541 – ERROR_INVALID_GROUP_ATTRIBUTES
The specified attributes are invalid, or incompatible with the attributes for the group as a whole.
0x00000542 – ERROR_BAD_IMPERSONATION_LEVEL
Either a required impersonation level was not provided, or the provided impersonation level is invalid.
0x00000543 – ERROR_CANT_OPEN_ANONYMOUS
Cannot open an anonymous level security token.
0x00000544 – ERROR_BAD_VALIDATION_CLASS
The validation information class requested was invalid.
0x00000545 – ERROR_BAD_TOKEN_TYPE
The type of the token is inappropriate for its attempted use.
0x00000546 – ERROR_NO_SECURITY_ON_OBJECT
Unable to perform a security operation on an object that has no associated security.
0x00000547 – ERROR_CANT_ACCESS_DOMAIN_INFO
Configuration information could not be read from the domain controller, either because the machine is unavailable, or access has been denied.
0x00000548 – ERROR_INVALID_SERVER_STATE
The SAM or local security authority (LSA) server was in the wrong state to perform the security operation.
0x00000549 – ERROR_INVALID_DOMAIN_STATE
The domain was in the wrong state to perform the security operation.
0x0000054A – ERROR_INVALID_DOMAIN_ROLE
This operation is only allowed for the PDC of the domain.
0x0000054B – ERROR_NO_SUCH_DOMAIN
The specified domain either does not exist or could not be contacted.
0x0000054C – ERROR_DOMAIN_EXISTS
The specified domain already exists.
0x0000054D – ERROR_DOMAIN_LIMIT_EXCEEDED
An attempt was made to exceed the limit on the number of domains per server.
0x0000054E – ERROR_INTERNAL_DB_CORRUPTION
Unable to complete the requested operation because of either a catastrophic media failure or a data structure corruption on the disk.
0x0000054F – ERROR_INTERNAL_ERROR
An internal error occurred.
0x00000550 – ERROR_GENERIC_NOT_MAPPED
Generic access types were contained in an access mask that should already be mapped to nongeneric types.
0x00000551 – ERROR_BAD_DESCRIPTOR_FORMAT
A security descriptor is not in the right format (absolute or self-relative).
0x00000552 – ERROR_NOT_LOGON_PROCESS
The requested action is restricted for use by logon processes only. The calling process has not registered as a logon process.
0x00000553 – ERROR_LOGON_SESSION_EXISTS
Cannot start a new logon session with an ID that is already in use.
0x00000554 – ERROR_NO_SUCH_PACKAGE
A specified authentication package is unknown.
0x00000555 – ERROR_BAD_LOGON_SESSION_STATE
The logon session is not in a state that is consistent with the requested operation.
0x00000556 – ERROR_LOGON_SESSION_COLLISION
The logon session ID is already in use.
0x00000557 – ERROR_INVALID_LOGON_TYPE
A logon request contained an invalid logon type value.
0x00000558 – ERROR_CANNOT_IMPERSONATE
Unable to impersonate using a named pipe until data has been read from that pipe.
0x00000559 – ERROR_RXACT_INVALID_STATE
The transaction state of a registry subtree is incompatible with the requested operation.
0x0000055A – ERROR_RXACT_COMMIT_FAILURE
An internal security database corruption has been encountered.
0x0000055B – ERROR_SPECIAL_ACCOUNT
Cannot perform this operation on built-in accounts.
0x0000055C – ERROR_SPECIAL_GROUP
Cannot perform this operation on this built-in special group.
0x0000055D – ERROR_SPECIAL_USER
Cannot perform this operation on this built-in special user.
0x0000055E – ERROR_MEMBERS_PRIMARY_GROUP
The user cannot be removed from a group because the group is currently the user's primary group.
0x0000055F – ERROR_TOKEN_ALREADY_IN_USE
The token is already in use as a primary token.
0x00000560 – ERROR_NO_SUCH_ALIAS
The specified local group does not exist.
0x00000561 – ERROR_MEMBER_NOT_IN_ALIAS
The specified account name is not a member of the group.
0x00000562 – ERROR_MEMBER_IN_ALIAS
The specified account name is already a member of the group.
0x00000563 – ERROR_ALIAS_EXISTS
The specified local group already exists.
0x00000564 – ERROR_LOGON_NOT_GRANTED
Logon failure: The user has not been granted the requested logon type at this computer.
0x00000565 – ERROR_TOO_MANY_SECRETS
The maximum number of secrets that can be stored in a single system has been exceeded.
0x00000566 – ERROR_SECRET_TOO_LONG
The length of a secret exceeds the maximum length allowed.
0x00000567 – ERROR_INTERNAL_DB_ERROR
The local security authority database contains an internal inconsistency.
0x00000568 – ERROR_TOO_MANY_CONTEXT_IDS
During a logon attempt, the user's security context accumulated too many SIDs.
0x00000569 – ERROR_LOGON_TYPE_NOT_GRANTED
Logon failure: The user has not been granted the requested logon type at this computer.
0x0000056A – ERROR_NT_CROSS_ENCRYPTION_REQUIRED
A cross-encrypted password is necessary to change a user password.
0x0000056B – ERROR_NO_SUCH_MEMBER
A member could not be added to or removed from the local group because the member does not exist.
0x0000056C – ERROR_INVALID_MEMBER
A new member could not be added to a local group because the member has the wrong account type.
0x0000056D – ERROR_TOO_MANY_SIDS
Too many SIDs have been specified.
0x0000056E – ERROR_LM_CROSS_ENCRYPTION_REQUIRED
A cross-encrypted password is necessary to change this user password.
0x0000056F – ERROR_NO_INHERITANCE
Indicates an ACL contains no inheritable components.
0x00000570 – ERROR_FILE_CORRUPT
The file or directory is corrupted and unreadable.
0x00000571 – ERROR_DISK_CORRUPT
The disk structure is corrupted and unreadable.
0x00000572 – ERROR_NO_USER_SESSION_KEY
There is no user session key for the specified logon session.
0x00000573 – ERROR_LICENSE_QUOTA_EXCEEDED
The service being accessed is licensed for a particular number of connections. No more connections can be made to the service at this time because the service has accepted the maximum number of connections.
0x00000574 – ERROR_WRONG_TARGET_NAME
Logon failure: The target account name is incorrect.
0x00000575 – ERROR_MUTUAL_AUTH_FAILED
Mutual authentication failed. The server's password is out of date at the domain controller.
0x00000576 – ERROR_TIME_SKEW
There is a time and/or date difference between the client and server.
0x00000577 – ERROR_CURRENT_DOMAIN_NOT_ALLOWED
This operation cannot be performed on the current domain.
0x00000578 – ERROR_INVALID_WINDOW_HANDLE
Invalid window handle.
0x00000579 – ERROR_INVALID_MENU_HANDLE
Invalid menu handle.
0x0000057A – ERROR_INVALID_CURSOR_HANDLE
Invalid cursor handle.
0x0000057B – ERROR_INVALID_ACCEL_HANDLE
Invalid accelerator table handle.
0x0000057C – ERROR_INVALID_HOOK_HANDLE
Invalid hook handle.
0x0000057D – ERROR_INVALID_DWP_HANDLE
Invalid handle to a multiple-window position structure.
0x0000057E – ERROR_TLW_WITH_WSCHILD
Cannot create a top-level child window.
0x0000057F – ERROR_CANNOT_FIND_WND_CLASS
Cannot find window class.
0x00000580 – ERROR_WINDOW_OF_OTHER_THREAD
Invalid window; it belongs to other thread.
0x00000581 – ERROR_HOTKEY_ALREADY_REGISTERED
Hot key is already registered.
0x00000582 – ERROR_CLASS_ALREADY_EXISTS
Class already exists.
0x00000583 – ERROR_CLASS_DOES_NOT_EXIST
Class does not exist.
0x00000584 – ERROR_CLASS_HAS_WINDOWS
Class still has open windows.
0x00000585 – ERROR_INVALID_INDEX
Invalid index.
0x00000586 – ERROR_INVALID_ICON_HANDLE
Invalid icon handle.
0x00000587 – ERROR_PRIVATE_DIALOG_INDEX
Using private DIALOG window words.
0x00000588 – ERROR_LISTBOX_ID_NOT_FOUND
The list box identifier was not found.
0x00000589 – ERROR_NO_WILDCARD_CHARACTERS
No wildcards were found.
0x0000058A – ERROR_CLIPBOARD_NOT_OPEN
Thread does not have a clipboard open.
0x0000058B – ERROR_HOTKEY_NOT_REGISTERED
Hot key is not registered.
0x0000058C – ERROR_WINDOW_NOT_DIALOG
The window is not a valid dialog window.
0x0000058D – ERROR_CONTROL_ID_NOT_FOUND
Control ID not found.
0x0000058E – ERROR_INVALID_COMBOBOX_MESSAGE
Invalid message for a combo box because it does not have an edit control.
0x0000058F – ERROR_WINDOW_NOT_COMBOBOX
The window is not a combo box.
0x00000590 – ERROR_INVALID_EDIT_HEIGHT
Height must be less than 256.
0x00000591 – ERROR_DC_NOT_FOUND
Invalid device context (DC) handle.
0x00000592 – ERROR_INVALID_HOOK_FILTER
Invalid hook procedure type.
0x00000593 – ERROR_INVALID_FILTER_PROC
Invalid hook procedure.
0x00000594 – ERROR_HOOK_NEEDS_HMOD
Cannot set nonlocal hook without a module handle.
0x00000595 – ERROR_GLOBAL_ONLY_HOOK
This hook procedure can only be set globally.
0x00000596 – ERROR_JOURNAL_HOOK_SET
The journal hook procedure is already installed.
0x00000597 – ERROR_HOOK_NOT_INSTALLED
The hook procedure is not installed.
0x00000598 – ERROR_INVALID_LB_MESSAGE
Invalid message for single-selection list box.
0x00000599 – ERROR_SETCOUNT_ON_BAD_LB
LB_SETCOUNT sent to non-lazy list box.
0x0000059A – ERROR_LB_WITHOUT_TABSTOPS
This list box does not support tab stops.
0x0000059B – ERROR_DESTROY_OBJECT_OF_OTHER_THREAD
Cannot destroy object created by another thread.
0x0000059C – ERROR_CHILD_WINDOW_MENU
Child windows cannot have menus.
0x0000059D – ERROR_NO_SYSTEM_MENU
The window does not have a system menu.
0x0000059E – ERROR_INVALID_MSGBOX_STYLE
Invalid message box style.
0x0000059F – ERROR_INVALID_SPI_VALUE
Invalid system-wide (SPI_
) parameter.
0x000005A0 – ERROR_SCREEN_ALREADY_LOCKED
Screen already locked.
0x000005A1 – ERROR_HWNDS_HAVE_DIFF_PARENT
All handles to windows in a multiple-window position structure must have the same parent.
0x000005A2 – ERROR_NOT_CHILD_WINDOW
The window is not a child window.
0x000005A3 – ERROR_INVALID_GW_COMMAND
Invalid GW_
command.
0x000005A4 – ERROR_INVALID_THREAD_ID
Invalid thread identifier.
0x000005A5 – ERROR_NON_MDICHILD_WINDOW
Cannot process a message from a window that is not a multiple document interface (MDI) window.
0x000005A6 – ERROR_POPUP_ALREADY_ACTIVE
Pop-up menu already active.
0x000005A7 – ERROR_NO_SCROLLBARS
The window does not have scroll bars.
0x000005A8 – ERROR_INVALID_SCROLLBAR_RANGE
Scroll bar range cannot be greater than MAXLONG.
0x000005A9 – ERROR_INVALID_SHOWWIN_COMMAND
Cannot show or remove the window in the way specified.
0x000005AA – ERROR_NO_SYSTEM_RESOURCES
Insufficient system resources exist to complete the requested service.
0x000005AB – ERROR_NONPAGED_SYSTEM_RESOURCES
Insufficient system resources exist to complete the requested service.
0x000005AC – ERROR_PAGED_SYSTEM_RESOURCES
Insufficient system resources exist to complete the requested service.
0x000005AD – ERROR_WORKING_SET_QUOTA
Insufficient quota to complete the requested service.
0x000005AE – ERROR_PAGEFILE_QUOTA
Insufficient quota to complete the requested service.
0x000005AF – ERROR_COMMITMENT_LIMIT
The paging file is too small for this operation to complete.
0x000005B0 – ERROR_MENU_ITEM_NOT_FOUND
A menu item was not found.
0x000005B1 – ERROR_INVALID_KEYBOARD_HANDLE
Invalid keyboard layout handle.
0x000005B2 – ERROR_HOOK_TYPE_NOT_ALLOWED
Hook type not allowed.
0x000005B3 – ERROR_REQUIRES_INTERACTIVE_WINDOWSTATION
This operation requires an interactive window station.
0x000005B4 – ERROR_TIMEOUT
This operation returned because the time-out period expired.
0x000005B5 – ERROR_INVALID_MONITOR_HANDLE
Invalid monitor handle.
0x000005B6 – ERROR_INCORRECT_SIZE
Incorrect size argument.
0x000005B7 – ERROR_SYMLINK_CLASS_DISABLED
The symbolic link cannot be followed because its type is disabled.
0x000005B8 – ERROR_SYMLINK_NOT_SUPPORTED
This application does not support the current operation on symbolic links.
0x000005DC – ERROR_EVENTLOG_FILE_CORRUPT
The event log file is corrupted.
0x000005DD – ERROR_EVENTLOG_CANT_START
No event log file could be opened, so the event logging service did not start.
0x000005DE – ERROR_LOG_FILE_FULL
The event log file is full.
0x000005DF – ERROR_EVENTLOG_FILE_CHANGED
The event log file has changed between read operations.
0x0000060E – ERROR_INVALID_TASK_NAME
The specified task name is invalid.
0x0000060F – ERROR_INVALID_TASK_INDEX
The specified task index is invalid.
0x00000610 – ERROR_THREAD_ALREADY_IN_TASK
The specified thread is already joining a task.
0x00000641 – ERROR_INSTALL_SERVICE_FAILURE
The Windows Installer service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance.
0x00000642 – ERROR_INSTALL_USEREXIT
User canceled installation.
0x00000643 – ERROR_INSTALL_FAILURE
Fatal error during installation.
0x00000644 – ERROR_INSTALL_SUSPEND
Installation suspended, incomplete.
0x00000645 – ERROR_UNKNOWN_PRODUCT
This action is valid only for products that are currently installed.
0x00000646 – ERROR_UNKNOWN_FEATURE
Feature ID not registered.
0x00000647 – ERROR_UNKNOWN_COMPONENT
Component ID not registered.
0x00000648 – ERROR_UNKNOWN_PROPERTY
Unknown property.
0x00000649 – ERROR_INVALID_HANDLE_STATE
Handle is in an invalid state.
0x0000064A – ERROR_BAD_CONFIGURATION
The configuration data for this product is corrupt. Contact your support personnel.
0x0000064B – ERROR_INDEX_ABSENT
Component qualifier not present.
0x0000064C – ERROR_INSTALL_SOURCE_ABSENT
The installation source for this product is not available. Verify that the source exists and that you can access it.
0x0000064D – ERROR_INSTALL_PACKAGE_VERSION
This installation package cannot be installed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service.
0x0000064E – ERROR_PRODUCT_UNINSTALLED
Product is uninstalled.
0x0000064F – ERROR_BAD_QUERY_SYNTAX
SQL query syntax invalid or unsupported.
0x00000650 – ERROR_INVALID_FIELD
Record field does not exist.
0x00000651 – ERROR_DEVICE_REMOVED
The device has been removed.
0x00000652 – ERROR_INSTALL_ALREADY_RUNNING
Another installation is already in progress. Complete that installation before proceeding with this install.
0x00000653 – ERROR_INSTALL_PACKAGE_OPEN_FAILED
This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package.
0x00000654 – ERROR_INSTALL_PACKAGE_INVALID
This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package.
0x00000655 – ERROR_INSTALL_UI_FAILURE
There was an error starting the Windows Installer service user interface. Contact your support personnel.
0x00000656 – ERROR_INSTALL_LOG_FAILURE
Error opening installation log file. Verify that the specified log file location exists and that you can write to it.
0x00000657 – ERROR_INSTALL_LANGUAGE_UNSUPPORTED
The language of this installation package is not supported by your system.
0x00000658 – ERROR_INSTALL_TRANSFORM_FAILURE
Error applying transforms. Verify that the specified transform paths are valid.
0x00000659 – ERROR_INSTALL_PACKAGE_REJECTED
This installation is forbidden by system policy. Contact your system administrator.
0x0000065A – ERROR_FUNCTION_NOT_CALLED
Function could not be executed.
0x0000065B – ERROR_FUNCTION_FAILED
Function failed during execution.
0x0000065C – ERROR_INVALID_TABLE
Invalid or unknown table specified.
0x0000065D – ERROR_DATATYPE_MISMATCH
Data supplied is of wrong type.
0x0000065E – ERROR_UNSUPPORTED_TYPE
Data of this type is not supported.
0x0000065F – ERROR_CREATE_FAILED
The Windows Installer service failed to start. Contact your support personnel.
0x00000660 – ERROR_INSTALL_TEMP_UNWRITABLE
The Temp folder is on a drive that is full or is inaccessible. Free up space on the drive or verify that you have write permission on the Temp folder.
0x00000661 – ERROR_INSTALL_PLATFORM_UNSUPPORTED
This installation package is not supported by this processor type. Contact your product vendor.
0x00000662 – ERROR_INSTALL_NOTUSED
Component not used on this computer.
0x00000663 – ERROR_PATCH_PACKAGE_OPEN_FAILED
This update package could not be opened. Verify that the update package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer update package.
0x00000664 – ERROR_PATCH_PACKAGE_INVALID
This update package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer update package.
0x00000665 – ERROR_PATCH_PACKAGE_UNSUPPORTED
This update package cannot be processed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service.
0x00000666 – ERROR_PRODUCT_VERSION
Another version of this product is already installed. Installation of this version cannot continue. To configure or remove the existing version of this product, use Add/Remove Programs in Control Panel.
0x00000667 – ERROR_INVALID_COMMAND_LINE
Invalid command-line argument. Consult the Windows Installer SDK for detailed command line help.
0x00000668 – ERROR_INSTALL_REMOTE_DISALLOWED
Only administrators have permission to add, remove, or configure server software during a Terminal Services remote session. If you want to install or configure software on the server, contact your network administrator.
0x00000669 – ERROR_SUCCESS_REBOOT_INITIATED
The requested operation completed successfully. The system will be restarted so the changes can take effect.
0x0000066A – ERROR_PATCH_TARGET_NOT_FOUND
The upgrade cannot be installed by the Windows Installer service because the program to be upgraded might be missing, or the upgrade might update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade.
0x0000066B – ERROR_PATCH_PACKAGE_REJECTED
The update package is not permitted by a software restriction policy.
0x0000066C – ERROR_INSTALL_TRANSFORM_REJECTED
One or more customizations are not permitted by a software restriction policy.
0x0000066D – ERROR_INSTALL_REMOTE_PROHIBITED
The Windows Installer does not permit installation from a Remote Desktop Connection.
0x0000066E – ERROR_PATCH_REMOVAL_UNSUPPORTED
Uninstallation of the update package is not supported.
0x0000066F – ERROR_UNKNOWN_PATCH
The update is not applied to this product.
0x00000670 – ERROR_PATCH_NO_SEQUENCE
No valid sequence could be found for the set of updates.
0x00000671 – ERROR_PATCH_REMOVAL_DISALLOWED
Update removal was disallowed by policy.
0x00000672 – ERROR_INVALID_PATCH_XML
The XML update data is invalid.
0x00000673 – ERROR_PATCH_MANAGED_ADVERTISED_PRODUCT
Windows Installer does not permit updating of managed advertised products. At least one feature of the product must be installed before applying the update.
0x00000674 – ERROR_INSTALL_SERVICE_SAFEBOOT
The Windows Installer service is not accessible in Safe Mode. Try again when your computer is not in Safe Mode or you can use System Restore to return your machine to a previous good state.
0x000006A4 – RPC_S_INVALID_STRING_BINDING
The string binding is invalid.
0x000006A5 – RPC_S_WRONG_KIND_OF_BINDING
The binding handle is not the correct type.
0x000006A6 – RPC_S_INVALID_BINDING
The binding handle is invalid.
0x000006A7 – RPC_S_PROTSEQ_NOT_SUPPORTED
The RPC protocol sequence is not supported.
0x000006A8 – RPC_S_INVALID_RPC_PROTSEQ
The RPC protocol sequence is invalid.
0x000006A9 – RPC_S_INVALID_STRING_UUID
The string UUID is invalid.
0x000006AA – RPC_S_INVALID_ENDPOINT_FORMAT
The endpoint format is invalid.
0x000006AB – RPC_S_INVALID_NET_ADDR
The network address is invalid.
0x000006AC – RPC_S_NO_ENDPOINT_FOUND
No endpoint was found.
0x000006AD – RPC_S_INVALID_TIMEOUT
The time-out value is invalid.
0x000006AE – RPC_S_OBJECT_NOT_FOUND
The object UUID) was not found.
0x000006AF – RPC_S_ALREADY_REGISTERED
The object UUID) has already been registered.
0x000006B0 – RPC_S_TYPE_ALREADY_REGISTERED
The type UUID has already been registered.
0x000006B1 – RPC_S_ALREADY_LISTENING
The RPC server is already listening.
0x000006B2 – RPC_S_NO_PROTSEQS_REGISTERED
No protocol sequences have been registered.
0x000006B3 – RPC_S_NOT_LISTENING
The RPC server is not listening.
0x000006B4 – RPC_S_UNKNOWN_MGR_TYPE
The manager type is unknown.
0x000006B5 – RPC_S_UNKNOWN_IF
The interface is unknown.
0x000006B6 – RPC_S_NO_BINDINGS
There are no bindings.
0x000006B7 – RPC_S_NO_PROTSEQS
There are no protocol sequences.
0x000006B8 – RPC_S_CANT_CREATE_ENDPOINT
The endpoint cannot be created.
0x000006B9 – RPC_S_OUT_OF_RESOURCES
Not enough resources are available to complete this operation.
0x000006BA – RPC_S_SERVER_UNAVAILABLE
The RPC server is unavailable.
0x000006BB – RPC_S_SERVER_TOO_BUSY
The RPC server is too busy to complete this operation.
0x000006BC – RPC_S_INVALID_NETWORK_OPTIONS
The network options are invalid.
0x000006BD – RPC_S_NO_CALL_ACTIVE
There are no RPCs active on this thread.
0x000006BE – RPC_S_CALL_FAILED
The RPC failed.
0x000006BF – RPC_S_CALL_FAILED_DNE
The RPC failed and did not execute.
0x000006C0 – RPC_S_PROTOCOL_ERROR
An RPC protocol error occurred.
0x000006C1 – RPC_S_PROXY_ACCESS_DENIED
Access to the HTTP proxy is denied.
0x000006C2 – RPC_S_UNSUPPORTED_TRANS_SYN
The transfer syntax is not supported by the RPC server.
0x000006C4 – RPC_S_UNSUPPORTED_TYPE
The UUID type is not supported.
0x000006C5 – RPC_S_INVALID_TAG
The tag is invalid.
0x000006C6 – RPC_S_INVALID_BOUND
The array bounds are invalid.
0x000006C7 – RPC_S_NO_ENTRY_NAME
The binding does not contain an entry name.
0x000006C8 – RPC_S_INVALID_NAME_SYNTAX
The name syntax is invalid.
0x000006C9 – RPC_S_UNSUPPORTED_NAME_SYNTAX
The name syntax is not supported.
0x000006CB – RPC_S_UUID_NO_ADDRESS
No network address is available to use to construct a UUID.
0x000006CC – RPC_S_DUPLICATE_ENDPOINT
The endpoint is a duplicate.
0x000006CD – RPC_S_UNKNOWN_AUTHN_TYPE
The authentication type is unknown.
0x000006CE – RPC_S_MAX_CALLS_TOO_SMALL
The maximum number of calls is too small.
0x000006CF – RPC_S_STRING_TOO_LONG
The string is too long.
0x000006D0 – RPC_S_PROTSEQ_NOT_FOUND
The RPC protocol sequence was not found.
0x000006D1 – RPC_S_PROCNUM_OUT_OF_RANGE
The procedure number is out of range.
0x000006D2 – RPC_S_BINDING_HAS_NO_AUTH
The binding does not contain any authentication information.
0x000006D3 – RPC_S_UNKNOWN_AUTHN_SERVICE
The authentication service is unknown.
0x000006D4 – RPC_S_UNKNOWN_AUTHN_LEVEL
The authentication level is unknown.
0x000006D5 – RPC_S_INVALID_AUTH_IDENTITY
The security context is invalid.
0x000006D6 – RPC_S_UNKNOWN_AUTHZ_SERVICE
The authorization service is unknown.
0x000006D7 – EPT_S_INVALID_ENTRY
The entry is invalid.
0x000006D8 – EPT_S_CANT_PERFORM_OP
The server endpoint cannot perform the operation.
0x000006D9 – EPT_S_NOT_REGISTERED
There are no more endpoints available from the endpoint mapper.
0x000006DA – RPC_S_NOTHING_TO_EXPORT
No interfaces have been exported.
0x000006DB – RPC_S_INCOMPLETE_NAME
The entry name is incomplete.
0x000006DC – RPC_S_INVALID_VERS_OPTION
The version option is invalid.
0x000006DD – RPC_S_NO_MORE_MEMBERS
There are no more members.
0x000006DE – RPC_S_NOT_ALL_OBJS_UNEXPORTED
There is nothing to unexport.
0x000006DF – RPC_S_INTERFACE_NOT_FOUND
The interface was not found.
0x000006E0 – RPC_S_ENTRY_ALREADY_EXISTS
The entry already exists.
0x000006E1 – RPC_S_ENTRY_NOT_FOUND
The entry is not found.
0x000006E2 – RPC_S_NAME_SERVICE_UNAVAILABLE
The name service is unavailable.
0x000006E3 – RPC_S_INVALID_NAF_ID
The network address family is invalid.
0x000006E4 – RPC_S_CANNOT_SUPPORT
The requested operation is not supported.
0x000006E5 – RPC_S_NO_CONTEXT_AVAILABLE
No security context is available to allow impersonation.
0x000006E6 – RPC_S_INTERNAL_ERROR
An internal error occurred in an RPC.
0x000006E7 – RPC_S_ZERO_DIVIDE
The RPC server attempted an integer division by zero.
0x000006E8 – RPC_S_ADDRESS_ERROR
An addressing error occurred in the RPC server.
0x000006E9 – RPC_S_FP_DIV_ZERO
A floating-point operation at the RPC server caused a division by zero.
0x000006EA – RPC_S_FP_UNDERFLOW
A floating-point underflow occurred at the RPC server.
0x000006EB – RPC_S_FP_OVERFLOW
A floating-point overflow occurred at the RPC server.
0x000006EC – RPC_X_NO_MORE_ENTRIES
The list of RPC servers available for the binding of auto handles has been exhausted.
0x000006ED – RPC_X_SS_CHAR_TRANS_OPEN_FAIL
Unable to open the character translation table file.
0x000006EE – RPC_X_SS_CHAR_TRANS_SHORT_FILE
The file containing the character translation table has fewer than 512 bytes.
0x000006EF – RPC_X_SS_IN_NULL_CONTEXT
A null context handle was passed from the client to the host during an RPC.
0x000006F1 – RPC_X_SS_CONTEXT_DAMAGED
The context handle changed during an RPC.
0x000006F2 – RPC_X_SS_HANDLES_MISMATCH
The binding handles passed to an RPC do not match.
0x000006F3 – RPC_X_SS_CANNOT_GET_CALL_HANDLE
The stub is unable to get the RPC handle.
0x000006F4 – RPC_X_NULL_REF_POINTER
A null reference pointer was passed to the stub.
0x000006F5 – RPC_X_ENUM_VALUE_OUT_OF_RANGE
The enumeration value is out of range.
0x000006F6 – RPC_X_BYTE_COUNT_TOO_SMALL
The byte count is too small.
0x000006F7 – RPC_X_BAD_STUB_DATA
The stub received bad data.
0x000006F8 – ERROR_INVALID_USER_BUFFER
The supplied user buffer is not valid for the requested operation.
0x000006F9 – ERROR_UNRECOGNIZED_MEDIA
The disk media is not recognized. It might not be formatted.
0x000006FA – ERROR_NO_TRUST_LSA_SECRET
The workstation does not have a trust secret.
0x000006FB – ERROR_NO_TRUST_SAM_ACCOUNT
The security database on the server does not have a computer account for this workstation trust relationship.
0x000006FC – ERROR_TRUSTED_DOMAIN_FAILURE
The trust relationship between the primary domain and the trusted domain failed.
0x000006FD – ERROR_TRUSTED_RELATIONSHIP_FAILURE
The trust relationship between this workstation and the primary domain failed.
0x000006FE – ERROR_TRUST_FAILURE
The network logon failed.
0x000006FF – RPC_S_CALL_IN_PROGRESS
An RPC is already in progress for this thread.
0x00000700 – ERROR_NETLOGON_NOT_STARTED
An attempt was made to log on, but the network logon service was not started.
0x00000701 – ERROR_ACCOUNT_EXPIRED
The user's account has expired.
0x00000702 – ERROR_REDIRECTOR_HAS_OPEN_HANDLES
The redirector is in use and cannot be unloaded.
0x00000703 – ERROR_PRINTER_DRIVER_ALREADY_INSTALLED
The specified printer driver is already installed.
0x00000704 – ERROR_UNKNOWN_PORT
The specified port is unknown.
0x00000705 – ERROR_UNKNOWN_PRINTER_DRIVER
The printer driver is unknown.
0x00000706 – ERROR_UNKNOWN_PRINTPROCESSOR
The print processor is unknown.
0x00000707 – ERROR_INVALID_SEPARATOR_FILE
The specified separator file is invalid.
0x00000708 – ERROR_INVALID_PRIORITY
The specified priority is invalid.
0x00000709 – ERROR_INVALID_PRINTER_NAME
The printer name is invalid.
0x0000070A – ERROR_PRINTER_ALREADY_EXISTS
The printer already exists.
0x0000070B – ERROR_INVALID_PRINTER_COMMAND
The printer command is invalid.
0x0000070C – ERROR_INVALID_DATATYPE
The specified data type is invalid.
0x0000070D – ERROR_INVALID_ENVIRONMENT
The environment specified is invalid.
0x0000070E – RPC_S_NO_MORE_BINDINGS
There are no more bindings.
0x0000070F – ERROR_NOLOGON_INTERDOMAIN_TRUST_ACCOUNT
The account used is an interdomain trust account. Use your global user account or local user account to access this server.
0x00000710 – ERROR_NOLOGON_WORKSTATION_TRUST_ACCOUNT
The account used is a computer account. Use your global user account or local user account to access this server.
0x00000711 – ERROR_NOLOGON_SERVER_TRUST_ACCOUNT
The account used is a server trust account. Use your global user account or local user account to access this server.
0x00000712 – ERROR_DOMAIN_TRUST_INCONSISTENT
The name or SID of the domain specified is inconsistent with the trust information for that domain.
0x00000713 – ERROR_SERVER_HAS_OPEN_HANDLES
The server is in use and cannot be unloaded.
0x00000714 – ERROR_RESOURCE_DATA_NOT_FOUND
The specified image file did not contain a resource section.
0x00000715 – ERROR_RESOURCE_TYPE_NOT_FOUND
The specified resource type cannot be found in the image file.
0x00000716 – ERROR_RESOURCE_NAME_NOT_FOUND
The specified resource name cannot be found in the image file.
0x00000717 – ERROR_RESOURCE_LANG_NOT_FOUND
The specified resource language ID cannot be found in the image file.
0x00000718 – ERROR_NOT_ENOUGH_QUOTA
Not enough quota is available to process this command.
0x00000719 – RPC_S_NO_INTERFACES
No interfaces have been registered.
0x0000071A – RPC_S_CALL_CANCELLED
The RPC was canceled.
0x0000071B – RPC_S_BINDING_INCOMPLETE
The binding handle does not contain all the required information.
0x0000071C – RPC_S_COMM_FAILURE
A communications failure occurred during an RPC.
0x0000071D – RPC_S_UNSUPPORTED_AUTHN_LEVEL
The requested authentication level is not supported.
0x0000071E – RPC_S_NO_PRINC_NAME
No principal name is registered.
0x0000071F – RPC_S_NOT_RPC_ERROR
The error specified is not a valid Windows RPC error code.
0x00000720 – RPC_S_UUID_LOCAL_ONLY
A UUID that is valid only on this computer has been allocated.
0x00000721 – RPC_S_SEC_PKG_ERROR
A security package-specific error occurred.
0x00000722 – RPC_S_NOT_CANCELLED
The thread is not canceled.
0x00000723 – RPC_X_INVALID_ES_ACTION
Invalid operation on the encoding/decoding handle.
0x00000724 – RPC_X_WRONG_ES_VERSION
Incompatible version of the serializing package.
0x00000725 – RPC_X_WRONG_STUB_VERSION
Incompatible version of the RPC stub.
0x00000726 – RPC_X_INVALID_PIPE_OBJECT
The RPC pipe object is invalid or corrupted.
0x00000727 – RPC_X_WRONG_PIPE_ORDER
An invalid operation was attempted on an RPC pipe object.
0x00000728 – RPC_X_WRONG_PIPE_VERSION
Unsupported RPC pipe version.
0x0000076A – RPC_S_GROUP_MEMBER_NOT_FOUND
The group member was not found.
0x0000076B – EPT_S_CANT_CREATE
The endpoint mapper database entry could not be created.
0x0000076C – RPC_S_INVALID_OBJECT
The object UUID is the nil UUID.
0x0000076D – ERROR_INVALID_TIME
The specified time is invalid.
0x0000076E – ERROR_INVALID_FORM_NAME
The specified form name is invalid.
0x0000076F – ERROR_INVALID_FORM_SIZE
The specified form size is invalid.
0x00000770 – ERROR_ALREADY_WAITING
The specified printer handle is already being waited on.
0x00000771 – ERROR_PRINTER_DELETED
The specified printer has been deleted.
0x00000772 – ERROR_INVALID_PRINTER_STATE
The state of the printer is invalid.
0x00000773 – ERROR_PASSWORD_MUST_CHANGE
The user's password must be changed before logging on the first time.
0x00000774 – ERROR_DOMAIN_CONTROLLER_NOT_FOUND
Could not find the domain controller for this domain.
0x00000775 – ERROR_ACCOUNT_LOCKED_OUT
The referenced account is currently locked out and cannot be logged on to.
0x00000776 – OR_INVALID_OXID
The object exporter specified was not found.
0x00000777 – OR_INVALID_OID
The object specified was not found.
0x00000778 – OR_INVALID_SET
The object set specified was not found.
0x00000779 – RPC_S_SEND_INCOMPLETE
Some data remains to be sent in the request buffer.
0x0000077A – RPC_S_INVALID_ASYNC_HANDLE
Invalid asynchronous RPC handle.
0x0000077B – RPC_S_INVALID_ASYNC_CALL
Invalid asynchronous RPC call handle for this operation.
0x0000077C – RPC_X_PIPE_CLOSED
The RPC pipe object has already been closed.
0x0000077D – RPC_X_PIPE_DISCIPLINE_ERROR
The RPC call completed before all pipes were processed.
0x0000077E – RPC_X_PIPE_EMPTY
No more data is available from the RPC pipe.
0x0000077F – ERROR_NO_SITENAME
No site name is available for this machine.
0x00000780 – ERROR_CANT_ACCESS_FILE
The file cannot be accessed by the system.
0x00000781 – ERROR_CANT_RESOLVE_FILENAME
The name of the file cannot be resolved by the system.
0x00000782 – RPC_S_ENTRY_TYPE_MISMATCH
The entry is not of the expected type.
0x00000783 – RPC_S_NOT_ALL_OBJS_EXPORTED
Not all object UUIDs could be exported to the specified entry.
0x00000784 – RPC_S_INTERFACE_NOT_EXPORTED
The interface could not be exported to the specified entry.
0x00000785 – RPC_S_PROFILE_NOT_ADDED
The specified profile entry could not be added.
0x00000786 – RPC_S_PRF_ELT_NOT_ADDED
The specified profile element could not be added.
0x00000787 – RPC_S_PRF_ELT_NOT_REMOVED
The specified profile element could not be removed.
0x00000788 – RPC_S_GRP_ELT_NOT_ADDED
The group element could not be added.
0x00000789 – RPC_S_GRP_ELT_NOT_REMOVED
The group element could not be removed.
0x0000078A – ERROR_KM_DRIVER_BLOCKED
The printer driver is not compatible with a policy enabled on your computer that blocks Windows NT 4.0 operating system drivers.
0x0000078B – ERROR_CONTEXT_EXPIRED
The context has expired and can no longer be used.
0x0000078C – ERROR_PER_USER_TRUST_QUOTA_EXCEEDED
The current user's delegated trust creation quota has been exceeded.
0x0000078D – ERROR_ALL_USER_TRUST_QUOTA_EXCEEDED
The total delegated trust creation quota has been exceeded.
0x0000078E – ERROR_USER_DELETE_TRUST_QUOTA_EXCEEDED
The current user's delegated trust deletion quota has been exceeded.
0x0000078F – ERROR_AUTHENTICATION_FIREWALL_FAILED
Logon failure: The machine you are logging on to is protected by an authentication firewall. The specified account is not allowed to authenticate to the machine.
0x00000790 – ERROR_REMOTE_PRINT_CONNECTIONS_BLOCKED
Remote connections to the Print Spooler are blocked by a policy set on your machine.
0x000007D0 – ERROR_INVALID_PIXEL_FORMAT
The pixel format is invalid.
0x000007D1 – ERROR_BAD_DRIVER
The specified driver is invalid.
0x000007D2 – ERROR_INVALID_WINDOW_STYLE
The window style or class attribute is invalid for this operation.
0x000007D3 – ERROR_METAFILE_NOT_SUPPORTED
The requested metafile operation is not supported.
0x000007D4 – ERROR_TRANSFORM_NOT_SUPPORTED
The requested transformation operation is not supported.
0x000007D5 – ERROR_CLIPPING_NOT_SUPPORTED
The requested clipping operation is not supported.
0x000007DA – ERROR_INVALID_CMM
The specified color management module is invalid.
0x000007DB – ERROR_INVALID_PROFILE
The specified color profile is invalid.
0x000007DC – ERROR_TAG_NOT_FOUND
The specified tag was not found.
0x000007DD – ERROR_TAG_NOT_PRESENT
A required tag is not present.
0x000007DE – ERROR_DUPLICATE_TAG
The specified tag is already present.
0x000007DF – ERROR_PROFILE_NOT_ASSOCIATED_WITH_DEVICE
The specified color profile is not associated with any device.
0x000007E0 – ERROR_PROFILE_NOT_FOUND
The specified color profile was not found.
0x000007E1 – ERROR_INVALID_COLORSPACE
The specified color space is invalid.
0x000007E2 – ERROR_ICM_NOT_ENABLED
Image Color Management is not enabled.
0x000007E3 – ERROR_DELETING_ICM_XFORM
There was an error while deleting the color transform.
0x000007E4 – ERROR_INVALID_TRANSFORM
The specified color transform is invalid.
0x000007E5 – ERROR_COLORSPACE_MISMATCH
The specified transform does not match the bitmap's color space.
0x000007E6 – ERROR_INVALID_COLORINDEX
The specified named color index is not present in the profile.
0x000007E7 – ERROR_PROFILE_DOES_NOT_MATCH_DEVICE
The specified profile is intended for a device of a different type than the specified device.
0x00000836 – NERR_NetNotStarted
The workstation driver is not installed.
0x00000837 – NERR_UnknownServer
The server could not be located.
0x00000838 – NERR_ShareMem
An internal error occurred. The network cannot access a shared memory segment.
0x00000839 – NERR_NoNetworkResource
A network resource shortage occurred.
0x0000083A – NERR_RemoteOnly
This operation is not supported on workstations.
0x0000083B – NERR_DevNotRedirected
The device is not connected.
0x0000083C – ERROR_CONNECTED_OTHER_PASSWORD
The network connection was made successfully, but the user had to be prompted for a password other than the one originally specified.
0x0000083D – ERROR_CONNECTED_OTHER_PASSWORD_DEFAULT
The network connection was made successfully using default credentials.
0x00000842 – NERR_ServerNotStarted
The Server service is not started.
0x00000843 – NERR_ItemNotFound
The queue is empty.
0x00000844 – NERR_UnknownDevDir
The device or directory does not exist.
0x00000845 – NERR_RedirectedPath
The operation is invalid on a redirected resource.
0x00000846 – NERR_DuplicateShare
The name has already been shared.
0x00000847 – NERR_NoRoom
The server is currently out of the requested resource.
0x00000849 – NERR_TooManyItems
Requested addition of items exceeds the maximum allowed.
0x0000084A – NERR_InvalidMaxUsers
The Peer service supports only two simultaneous users.
0x0000084B – NERR_BufTooSmall
The API return buffer is too small.
0x0000084F – NERR_RemoteErr
A remote API error occurred.
0x00000853 – NERR_LanmanIniError
An error occurred when opening or reading the configuration file.
0x00000858 – NERR_NetworkError
A general network error occurred.
0x00000859 – NERR_WkstaInconsistentState
The Workstation service is in an inconsistent state. Restart the computer before restarting the Workstation service.
0x0000085A – NERR_WkstaNotStarted
The Workstation service has not been started.
0x0000085B – NERR_BrowserNotStarted
The requested information is not available.
0x0000085C – NERR_InternalError
An internal error occurred.
0x0000085D – NERR_BadTransactConfig
The server is not configured for transactions.
0x0000085E – NERR_InvalidAPI
The requested API is not supported on the remote server.
0x0000085F – NERR_BadEventName
The event name is invalid.
0x00000860 – NERR_DupNameReboot
The computer name already exists on the network. Change it and reboot the computer.
0x00000862 – NERR_CfgCompNotFound
The specified component could not be found in the configuration information.
0x00000863 – NERR_CfgParamNotFound
The specified parameter could not be found in the configuration information.
0x00000865 – NERR_LineTooLong
A line in the configuration file is too long.
0x00000866 – NERR_QNotFound
The printer does not exist.
0x00000867 – NERR_JobNotFound
The print job does not exist.
0x00000868 – NERR_DestNotFound
The printer destination cannot be found.
0x00000869 – NERR_DestExists
The printer destination already exists.
0x0000086A – NERR_QExists
The print queue already exists.
0x0000086B – NERR_QNoRoom
No more printers can be added.
0x0000086C – NERR_JobNoRoom
No more print jobs can be added.
0x0000086D – NERR_DestNoRoom
No more printer destinations can be added.
0x0000086E – NERR_DestIdle
This printer destination is idle and cannot accept control operations.
0x0000086F – NERR_DestInvalidOp
This printer destination request contains an invalid control function.
0x00000870 – NERR_ProcNoRespond
The print processor is not responding.
0x00000871 – NERR_SpoolerNotLoaded
The spooler is not running.
0x00000872 – NERR_DestInvalidState
This operation cannot be performed on the print destination in its current state.
0x00000873 – NERR_QinvalidState
This operation cannot be performed on the print queue in its current state.
0x00000874 – NERR_JobInvalidState
This operation cannot be performed on the print job in its current state.
0x00000875 – NERR_SpoolNoMemory
A spooler memory allocation failure occurred.
0x00000876 – NERR_DriverNotFound
The device driver does not exist.
0x00000877 – NERR_DataTypeInvalid
The data type is not supported by the print processor.
0x00000878 – NERR_ProcNotFound
The print processor is not installed.
0x00000884 – NERR_ServiceTableLocked
The service database is locked.
0x00000885 – NERR_ServiceTableFull
The service table is full.
0x00000886 – NERR_ServiceInstalled
The requested service has already been started.
0x00000887 – NERR_ServiceEntryLocked
The service does not respond to control actions.
0x00000888 – NERR_ServiceNotInstalled
The service has not been started.
0x00000889 – NERR_BadServiceName
The service name is invalid.
0x0000088A – NERR_ServiceCtlTimeout
The service is not responding to the control function.
0x0000088B – NERR_ServiceCtlBusy
The service control is busy.
0x0000088C – NERR_BadServiceProgName
The configuration file contains an invalid service program name.
0x0000088D – NERR_ServiceNotCtrl
The service could not be controlled in its present state.
0x0000088E – NERR_ServiceKillProc
The service ended abnormally.
0x0000088F – NERR_ServiceCtlNotValid
The requested pause or stop is not valid for this service.
0x00000890 – NERR_NotInDispatchTbl
The service control dispatcher could not find the service name in the dispatch table.
0x00000891 – NERR_BadControlRecv
The service control dispatcher pipe read failed.
0x00000892 – NERR_ServiceNotStarting
A thread for the new service could not be created.
0x00000898 – NERR_AlreadyLoggedOn
This workstation is already logged on to the LAN.
0x00000899 – NERR_NotLoggedOn
The workstation is not logged on to the LAN.
0x0000089A – NERR_BadUsername
The user name or group name parameter is invalid.
0x0000089B – NERR_BadPassword
The password parameter is invalid.
0x0000089C – NERR_UnableToAddName_W
The logon processor did not add the message alias.
0x0000089D – NERR_UnableToAddName_F
The logon processor did not add the message alias.
0x0000089E – NERR_UnableToDelName_W
@W The logoff processor did not delete the message alias.
0x0000089F – NERR_UnableToDelName_F
The logoff processor did not delete the message alias.
0x000008A1 – NERR_LogonsPaused
Network logons are paused.
0x000008A2 – NERR_LogonServerConflict
A centralized logon server conflict occurred.
0x000008A3 – NERR_LogonNoUserPath
The server is configured without a valid user path.
0x000008A4 – NERR_LogonScriptError
An error occurred while loading or running the logon script.
0x000008A6 – NERR_StandaloneLogon
The logon server was not specified. The computer will be logged on as STANDALONE.
0x000008A7 – NERR_LogonServerNotFound
The logon server could not be found.
0x000008A8 – NERR_LogonDomainExists
There is already a logon domain for this computer.
0x000008A9 – NERR_NonValidatedLogon
The logon server could not validate the logon.
0x000008AB – NERR_ACFNotFound
The security database could not be found.
0x000008AC – NERR_GroupNotFound
The group name could not be found.
0x000008AD – NERR_UserNotFound
The user name could not be found.
0x000008AE – NERR_ResourceNotFound
The resource name could not be found.
0x000008AF – NERR_GroupExists
The group already exists.
0x000008B0 – NERR_UserExists
The user account already exists.
0x000008B1 – NERR_ResourceExists
The resource permission list already exists.
0x000008B2 – NERR_NotPrimary
This operation is allowed only on the PDC of the domain.
0x000008B3 – NERR_ACFNotLoaded
The security database has not been started.
0x000008B4 – NERR_ACFNoRoom
There are too many names in the user accounts database.
0x000008B5 – NERR_ACFFileIOFail
A disk I/O failure occurred.
0x000008B6 – NERR_ACFTooManyLists
The limit of 64 entries per resource was exceeded.
0x000008B7 – NERR_UserLogon
Deleting a user with a session is not allowed.
0x000008B8 – NERR_ACFNoParent
The parent directory could not be located.
0x000008B9 – NERR_CanNotGrowSegment
Unable to add to the security database session cache segment.
0x000008BA – NERR_SpeGroupOp
This operation is not allowed on this special group.
0x000008BB – NERR_NotInCache
This user is not cached in the user accounts database session cache.
0x000008BC – NERR_UserInGroup
The user already belongs to this group.
0x000008BD – NERR_UserNotInGroup
The user does not belong to this group.
0x000008BE – NERR_AccountUndefined
This user account is undefined.
0x000008BF – NERR_AccountExpired
This user account has expired.
0x000008C0 – NERR_InvalidWorkstation
The user is not allowed to log on from this workstation.
0x000008C1 – NERR_InvalidLogonHours
The user is not allowed to log on at this time.
0x000008C2 – NERR_PasswordExpired
The password of this user has expired.
0x000008C3 – NERR_PasswordCantChange
The password of this user cannot change.
0x000008C4 – NERR_PasswordHistConflict
This password cannot be used now.
0x000008C5 – NERR_PasswordTooShort
The password does not meet the password policy requirements. Check the minimum password length, password complexity, and password history requirements.
0x000008C6 – NERR_PasswordTooRecent
The password of this user is too recent to change.
0x000008C7 – NERR_InvalidDatabase
The security database is corrupted.
0x000008C8 – NERR_DatabaseUpToDate
No updates are necessary to this replicant network or local security database.
0x000008C9 – NERR_SyncRequired
This replicant database is outdated; synchronization is required.
0x000008CA – NERR_UseNotFound
The network connection could not be found.
0x000008CB – NERR_BadAsgType
This asg_type is invalid.
0x000008CC – NERR_DeviceIsShared
This device is currently being shared.
0x000008DE – NERR_NoComputerName
The computer name could not be added as a message alias. The name might already exist on the network.
0x000008DF – NERR_MsgAlreadyStarted
The Messenger service is already started.
0x000008E0 – NERR_MsgInitFailed
The Messenger service failed to start.
0x000008E1 – NERR_NameNotFound
The message alias could not be found on the network.
0x000008E2 – NERR_AlreadyForwarded
This message alias has already been forwarded.
0x000008E3 – NERR_AddForwarded
This message alias has been added but is still forwarded.
0x000008E4 – NERR_AlreadyExists
This message alias already exists locally.
0x000008E5 – NERR_TooManyNames
The maximum number of added message aliases has been exceeded.
0x000008E6 – NERR_DelComputerName
The computer name could not be deleted.
0x000008E7 – NERR_LocalForward
Messages cannot be forwarded back to the same workstation.
0x000008E8 – NERR_GrpMsgProcessor
An error occurred in the domain message processor.
0x000008E9 – NERR_PausedRemote
The message was sent, but the recipient has paused the Messenger service.
0x000008EA – NERR_BadReceive
The message was sent but not received.
0x000008EB – NERR_NameInUse
The message alias is currently in use. Try again later.
0x000008EC – NERR_MsgNotStarted
The Messenger service has not been started.
0x000008ED – NERR_NotLocalName
The name is not on the local computer.
0x000008EE – NERR_NoForwardName
The forwarded message alias could not be found on the network.
0x000008EF – NERR_RemoteFull
The message alias table on the remote station is full.
0x000008F0 – NERR_NameNotForwarded
Messages for this alias are not currently being forwarded.
0x000008F1 – NERR_TruncatedBroadcast
The broadcast message was truncated.
0x000008F6 – NERR_InvalidDevice
This is an invalid device name.
0x000008F7 – NERR_WriteFault
A write fault occurred.
0x000008F9 – NERR_DuplicateName
A duplicate message alias exists on the network.
0x000008FA – NERR_DeleteLater
This message alias will be deleted later.
0x000008FB – NERR_IncompleteDel
The message alias was not successfully deleted from all networks.
0x000008FC – NERR_MultipleNets
This operation is not supported on computers with multiple networks.
0x00000906 – NERR_NetNameNotFound
This shared resource does not exist.
0x00000907 – NERR_DeviceNotShared
This device is not shared.
0x00000908 – NERR_ClientNameNotFound
A session does not exist with that computer name.
0x0000090A – NERR_FileIdNotFound
There is not an open file with that identification number.
0x0000090B – NERR_ExecFailure
A failure occurred when executing a remote administration command.
0x0000090C – NERR_TmpFile
A failure occurred when opening a remote temporary file.
0x0000090D – NERR_TooMuchData
The data returned from a remote administration command has been truncated to 64 KB.
0x0000090E – NERR_DeviceShareConflict
This device cannot be shared as both a spooled and a nonspooled resource.
0x0000090F – NERR_BrowserTableIncomplete
The information in the list of servers might be incorrect.
0x00000910 – NERR_NotLocalDomain
The computer is not active in this domain.
0x00000911 – NERR_IsDfsShare
The share must be removed from the Distributed File System (DFS) before it can be deleted.
0x0000091B – NERR_DevInvalidOpCode
The operation is invalid for this device.
0x0000091C – NERR_DevNotFound
This device cannot be shared.
0x0000091D – NERR_DevNotOpen
This device was not open.
0x0000091E – NERR_BadQueueDevString
This device name list is invalid.
0x0000091F – NERR_BadQueuePriority
The queue priority is invalid.
0x00000921 – NERR_NoCommDevs
There are no shared communication devices.
0x00000922 – NERR_QueueNotFound
The queue you specified does not exist.
0x00000924 – NERR_BadDevString
This list of devices is invalid.
0x00000925 – NERR_BadDev
The requested device is invalid.
0x00000926 – NERR_InUseBySpooler
This device is already in use by the spooler.
0x00000927 – NERR_CommDevInUse
This device is already in use as a communication device.
0x0000092F – NERR_InvalidComputer
This computer name is invalid.
0x00000932 – NERR_MaxLenExceeded
The string and prefix specified are too long.
0x00000934 – NERR_BadComponent
This path component is invalid.
0x00000935 – NERR_CantType
Could not determine the type of input.
0x0000093A – NERR_TooManyEntries
The buffer for types is not big enough.
0x00000942 – NERR_ProfileFileTooBig
Profile files cannot exceed 64 KB.
0x00000943 – NERR_ProfileOffset
The start offset is out of range.
0x00000944 – NERR_ProfileCleanup
The system cannot delete current connections to network resources.
0x00000945 – NERR_ProfileUnknownCmd
The system was unable to parse the command line in this file.
0x00000946 – NERR_ProfileLoadErr
An error occurred while loading the profile file.
0x00000947 – NERR_ProfileSaveErr
Errors occurred while saving the profile file. The profile was partially saved.
0x00000949 – NERR_LogOverflow
Log file %1 is full.
0x0000094A – NERR_LogFileChanged
This log file has changed between reads.
0x0000094B – NERR_LogFileCorrupt
Log file %1 is corrupt.
0x0000094C – NERR_SourceIsDir
The source path cannot be a directory.
0x0000094D – NERR_BadSource
The source path is illegal.
0x0000094E – NERR_BadDest
The destination path is illegal.
0x0000094F – NERR_DifferentServers
The source and destination paths are on different servers.
0x00000951 – NERR_RunSrvPaused
The Run server you requested is paused.
0x00000955 – NERR_ErrCommRunSrv
An error occurred when communicating with a Run server.
0x00000957 – NERR_ErrorExecingGhost
An error occurred when starting a background process.
0x00000958 – NERR_ShareNotFound
The shared resource you are connected to could not be found.
0x00000960 – NERR_InvalidLana
The LAN adapter number is invalid.
0x00000961 – NERR_OpenFiles
There are open files on the connection.
0x00000962 – NERR_ActiveConns
Active connections still exist.
0x00000963 – NERR_BadPasswordCore
This share name or password is invalid.
0x00000964 – NERR_DevInUse
The device is being accessed by an active process.
0x00000965 – NERR_LocalDrive
The drive letter is in use locally.
0x0000097E – NERR_AlertExists
The specified client is already registered for the specified event.
0x0000097F – NERR_TooManyAlerts
The alert table is full.
0x00000980 – NERR_NoSuchAlert
An invalid or nonexistent alert name was raised.
0x00000981 – NERR_BadRecipient
The alert recipient is invalid.
0x00000982 – NERR_AcctLimitExceeded
A user's session with this server has been deleted.
0x00000988 – NERR_InvalidLogSeek
The log file does not contain the requested record number.
0x00000992 – NERR_BadUasConfig
The user accounts database is not configured correctly.
0x00000993 – NERR_InvalidUASOp
This operation is not permitted when the Net Logon service is running.
0x00000994 – NERR_LastAdmin
This operation is not allowed on the last administrative account.
0x00000995 – NERR_DCNotFound
Could not find the domain controller for this domain.
0x00000996 – NERR_LogonTrackingError
Could not set logon information for this user.
0x00000997 – NERR_NetlogonNotStarted
The Net Logon service has not been started.
0x00000998 – NERR_CanNotGrowUASFile
Unable to add to the user accounts database.
0x00000999 – NERR_TimeDiffAtDC
This server's clock is not synchronized with the PDC's clock.
0x0000099A – NERR_PasswordMismatch
A password mismatch has been detected.
0x0000099C – NERR_NoSuchServer
The server identification does not specify a valid server.
0x0000099D – NERR_NoSuchSession
The session identification does not specify a valid session.
0x0000099E – NERR_NoSuchConnection
The connection identification does not specify a valid connection.
0x0000099F – NERR_TooManyServers
There is no space for another entry in the table of available servers.
0x000009A0 – NERR_TooManySessions
The server has reached the maximum number of sessions it supports.
0x000009A1 – NERR_TooManyConnections
The server has reached the maximum number of connections it supports.
0x000009A2 – NERR_TooManyFiles
The server cannot open more files because it has reached its maximum number.
0x000009A3 – NERR_NoAlternateServers
There are no alternate servers registered on this server.
0x000009A6 – NERR_TryDownLevel
Try the down-level (remote admin protocol) version of API instead.
0x000009B0 – NERR_UPSDriverNotStarted
The uninterruptible power supply (UPS) driver could not be accessed by the UPS service.
0x000009B1 – NERR_UPSInvalidConfig
The UPS service is not configured correctly.
0x000009B2 – NERR_UPSInvalidCommPort
The UPS service could not access the specified Comm Port.
0x000009B3 – NERR_UPSSignalAsserted
The UPS indicated a line fail or low battery situation. Service not started.
0x000009B4 – NERR_UPSShutdownFailed
The UPS service failed to perform a system shut down.
0x000009C4 – NERR_BadDosRetCode
The program below returned an MS-DOS error code.
0x000009C5 – NERR_ProgNeedsExtraMem
The program below needs more memory.
0x000009C6 – NERR_BadDosFunction
The program below called an unsupported MS-DOS function.
0x000009C7 – NERR_RemoteBootFailed
The workstation failed to boot.
0x000009C8 – NERR_BadFileCheckSum
The file below is corrupt.
0x000009C9 – NERR_NoRplBootSystem
No loader is specified in the boot-block definition file.
0x000009CA – NERR_RplLoadrNetBiosErr
NetBIOS returned an error: The network control blocks (NCBs) and Server Message Block (SMB) are dumped above.
0x000009CB – NERR_RplLoadrDiskErr
A disk I/O error occurred.
0x000009CC – NERR_ImageParamErr
Image parameter substitution failed.
0x000009CD – NERR_TooManyImageParams
Too many image parameters cross disk sector boundaries.
0x000009CE – NERR_NonDosFloppyUsed
The image was not generated from an MS-DOS disk formatted with /S.
0x000009CF – NERR_RplBootRestart
Remote boot will be restarted later.
0x000009D0 – NERR_RplSrvrCallFailed
The call to the Remoteboot server failed.
0x000009D1 – NERR_CantConnectRplSrvr
Cannot connect to the Remoteboot server.
0x000009D2 – NERR_CantOpenImageFile
Cannot open image file on the Remoteboot server.
0x000009D3 – NERR_CallingRplSrvr
Connecting to the Remoteboot server.
0x000009D4 – NERR_StartingRplBoot
Connecting to the Remoteboot server.
0x000009D5 – NERR_RplBootServiceTerm
Remote boot service was stopped, check the error log for the cause of the problem.
0x000009D6 – NERR_RplBootStartFailed
Remote boot startup failed; check the error log for the cause of the problem.
0x000009D7 – NERR_RPL_CONNECTED
A second connection to a Remoteboot resource is not allowed.
0x000009F6 – NERR_BrowserConfiguredToNotRun
The browser service was configured with MaintainServerList=No.
0x00000A32 – NERR_RplNoAdaptersStarted
Service failed to start because none of the network adapters started with this service.
0x00000A33 – NERR_RplBadRegistry
Service failed to start due to bad startup information in the registry.
0x00000A34 – NERR_RplBadDatabase
Service failed to start because its database is absent or corrupt.
0x00000A35 – NERR_RplRplfilesShare
Service failed to start because the RPLFILES share is absent.
0x00000A36 – NERR_RplNotRplServer
Service failed to start because the RPLUSER group is absent.
0x00000A37 – NERR_RplCannotEnum
Cannot enumerate service records.
0x00000A38 – NERR_RplWkstaInfoCorrupted
Workstation record information has been corrupted.
0x00000A39 – NERR_RplWkstaNotFound
Workstation record was not found.
0x00000A3A – NERR_RplWkstaNameUnavailable
Workstation name is in use by some other workstation.
0x00000A3B – NERR_RplProfileInfoCorrupted
Profile record information has been corrupted.
0x00000A3C – NERR_RplProfileNotFound
Profile record was not found.
0x00000A3D – NERR_RplProfileNameUnavailable
Profile name is in use by some other profile.
0x00000A3E – NERR_RplProfileNotEmpty
There are workstations using this profile.
0x00000A3F – NERR_RplConfigInfoCorrupted
Configuration record information has been corrupted.
0x00000A40 – NERR_RplConfigNotFound
Configuration record was not found.
0x00000A41 – NERR_RplAdapterInfoCorrupted
Adapter ID record information has been corrupted.
0x00000A42 – NERR_RplInternal
An internal service error has occurred.
0x00000A43 – NERR_RplVendorInfoCorrupted
Vendor ID record information has been corrupted.
0x00000A44 – NERR_RplBootInfoCorrupted
Boot block record information has been corrupted.
0x00000A45 – NERR_RplWkstaNeedsUserAcct
The user account for this workstation record is missing.
0x00000A46 – NERR_RplNeedsRPLUSERAcct
The RPLUSER local group could not be found.
0x00000A47 – NERR_RplBootNotFound
Boot block record was not found.
0x00000A48 – NERR_RplIncompatibleProfile
Chosen profile is incompatible with this workstation.
0x00000A49 – NERR_RplAdapterNameUnavailable
Chosen network adapter ID is in use by some other workstation.
0x00000A4A – NERR_RplConfigNotEmpty
There are profiles using this configuration.
0x00000A4B – NERR_RplBootInUse
There are workstations, profiles, or configurations using this boot block.
0x00000A4C – NERR_RplBackupDatabase
Service failed to back up the Remoteboot database.
0x00000A4D – NERR_RplAdapterNotFound
Adapter record was not found.
0x00000A4E – NERR_RplVendorNotFound
Vendor record was not found.
0x00000A4F – NERR_RplVendorNameUnavailable
Vendor name is in use by some other vendor record.
0x00000A50 – NERR_RplBootNameUnavailable
The boot name or vendor ID is in use by some other boot block record.
0x00000A51 – NERR_RplConfigNameUnavailable
The configuration name is in use by some other configuration.
0x00000A64 – NERR_DfsInternalCorruption
The internal database maintained by the DFS service is corrupt.
0x00000A65 – NERR_DfsVolumeDataCorrupt
One of the records in the internal DFS database is corrupt.
0x00000A66 – NERR_DfsNoSuchVolume
There is no DFS name whose entry path matches the input entry path.
0x00000A67 – NERR_DfsVolumeAlreadyExists
A root or link with the given name already exists.
0x00000A68 – NERR_DfsAlreadyShared
The server share specified is already shared in the DFS.
0x00000A69 – NERR_DfsNoSuchShare
The indicated server share does not support the indicated DFS namespace.
0x00000A6A – NERR_DfsNotALeafVolume
The operation is not valid in this portion of the namespace.
0x00000A6B – NERR_DfsLeafVolume
The operation is not valid in this portion of the namespace.
0x00000A6C – NERR_DfsVolumeHasMultipleServers
The operation is ambiguous because the link has multiple servers.
0x00000A6D – NERR_DfsCantCreateJunctionPoint
Unable to create a link.
0x00000A6E – NERR_DfsServerNotDfsAware
The server is not DFS-aware.
0x00000A6F – NERR_DfsBadRenamePath
The specified rename target path is invalid.
0x00000A70 – NERR_DfsVolumeIsOffline
The specified DFS link is offline.
0x00000A71 – NERR_DfsNoSuchServer
The specified server is not a server for this link.
0x00000A72 – NERR_DfsCyclicalName
A cycle in the DFS name was detected.
0x00000A73 – NERR_DfsNotSupportedInServerDfs
The operation is not supported on a server-based DFS.
0x00000A74 – NERR_DfsDuplicateService
This link is already supported by the specified server share.
0x00000A75 – NERR_DfsCantRemoveLastServerShare
Cannot remove the last server share supporting this root or link.
0x00000A76 – NERR_DfsVolumeIsInterDfs
The operation is not supported for an inter-DFS link.
0x00000A77 – NERR_DfsInconsistent
The internal state of the DFS Service has become inconsistent.
0x00000A78 – NERR_DfsServerUpgraded
The DFS Service has been installed on the specified server.
0x00000A79 – NERR_DfsDataIsIdentical
The DFS data being reconciled is identical.
0x00000A7A – NERR_DfsCantRemoveDfsRoot
The DFS root cannot be deleted. Uninstall DFS if required.
0x00000A7B – NERR_DfsChildOrParentInDfs
A child or parent directory of the share is already in a DFS.
0x00000A82 – NERR_DfsInternalError
DFS internal error.
0x00000A83 – NERR_SetupAlreadyJoined
This machine is already joined to a domain.
0x00000A84 – NERR_SetupNotJoined
This machine is not currently joined to a domain.
0x00000A85 – NERR_SetupDomainController
This machine is a domain controller and cannot be unjoined from a domain.
0x00000A86 – NERR_DefaultJoinRequired
The destination domain controller does not support creating machine accounts in organizational units (OUs).
0x00000A87 – NERR_InvalidWorkgroupName
The specified workgroup name is invalid.
0x00000A88 – NERR_NameUsesIncompatibleCodePage
The specified computer name is incompatible with the default language used on the domain controller.
0x00000A89 – NERR_ComputerAccountNotFound
The specified computer account could not be found.
0x00000A8A – NERR_PersonalSku
This version of Windows cannot be joined to a domain.
0x00000A8D – NERR_PasswordMustChange
The password must change at the next logon.
0x00000A8E – NERR_AccountLockedOut
The account is locked out.
0x00000A8F – NERR_PasswordTooLong
The password is too long.
0x00000A90 – NERR_PasswordNotComplexEnough
The password does not meet the complexity policy.
0x00000A91 – NERR_PasswordFilterError
The password does not meet the requirements of the password filter DLLs.
0x00000BB8 – ERROR_UNKNOWN_PRINT_MONITOR
The specified print monitor is unknown.
0x00000BB9 – ERROR_PRINTER_DRIVER_IN_USE
The specified printer driver is currently in use.
0x00000BBA – ERROR_SPOOL_FILE_NOT_FOUND
The spool file was not found.
0x00000BBB – ERROR_SPL_NO_STARTDOC
A StartDocPrinter call was not issued.
0x00000BBC – ERROR_SPL_NO_ADDJOB
An AddJob call was not issued.
0x00000BBD – ERROR_PRINT_PROCESSOR_ALREADY_INSTALLED
The specified print processor has already been installed.
0x00000BBE – ERROR_PRINT_MONITOR_ALREADY_INSTALLED
The specified print monitor has already been installed.
0x00000BBF – ERROR_INVALID_PRINT_MONITOR
The specified print monitor does not have the required functions.
0x00000BC0 – ERROR_PRINT_MONITOR_IN_USE
The specified print monitor is currently in use.
0x00000BC1 – ERROR_PRINTER_HAS_JOBS_QUEUED
The requested operation is not allowed when there are jobs queued to the printer.
0x00000BC2 – ERROR_SUCCESS_REBOOT_REQUIRED
The requested operation is successful. Changes will not be effective until the system is rebooted.
0x00000BC3 – ERROR_SUCCESS_RESTART_REQUIRED
The requested operation is successful. Changes will not be effective until the service is restarted.
0x00000BC4 – ERROR_PRINTER_NOT_FOUND
No printers were found.
0x00000BC5 – ERROR_PRINTER_DRIVER_WARNED
The printer driver is known to be unreliable.
0x00000BC6 – ERROR_PRINTER_DRIVER_BLOCKED
The printer driver is known to harm the system.
0x00000BC7 – ERROR_PRINTER_DRIVER_PACKAGE_IN_USE
The specified printer driver package is currently in use.
0x00000BC8 – ERROR_CORE_DRIVER_PACKAGE_NOT_FOUND
Unable to find a core driver package that is required by the printer driver package.
0x00000BC9 – ERROR_FAIL_REBOOT_REQUIRED
The requested operation failed. A system reboot is required to roll back changes made.
0x00000BCA – ERROR_FAIL_REBOOT_INITIATED
The requested operation failed. A system reboot has been initiated to roll back changes made.
0x00000BCB – ERROR_PRINTER_DRIVER_DOWNLOAD_NEEDED
The specified printer driver was not found on the system and needs to be downloaded.
0x00000F6E – ERROR_IO_REISSUE_AS_CACHED
Reissue the given operation as a cached I/O operation.
0x00000FA0 – ERROR_WINS_INTERNAL
Windows Internet Name Service (WINS) encountered an error while processing the command.
0x00000FA1 – ERROR_CAN_NOT_DEL_LOCAL_WINS
The local WINS cannot be deleted.
0x00000FA2 – ERROR_STATIC_INIT
The importation from the file failed.
0x00000FA3 – ERROR_INC_BACKUP
The backup failed. Was a full backup done before?
0x00000FA4 – ERROR_FULL_BACKUP
The backup failed. Check the directory to which you are backing the database.
0x00000FA5 – ERROR_REC_NON_EXISTENT
The name does not exist in the WINS database.
0x00000FA6 – ERROR_RPL_NOT_ALLOWED
Replication with a nonconfigured partner is not allowed.
0x00000FD2 – PEERDIST_ERROR_CONTENTINFO_VERSION_UNSUPPORTED
The version of the supplied content information is not supported.
0x00000FD3 – PEERDIST_ERROR_CANNOT_PARSE_CONTENTINFO
The supplied content information is malformed.
0x00000FD4 – PEERDIST_ERROR_MISSING_DATA
The requested data cannot be found in local or peer caches.
0x00000FD5 – PEERDIST_ERROR_NO_MORE
No more data is available or required.
0x00000FD6 – PEERDIST_ERROR_NOT_INITIALIZED
The supplied object has not been initialized.
0x00000FD7 – PEERDIST_ERROR_ALREADY_INITIALIZED
The supplied object has already been initialized.
0x00000FD8 – PEERDIST_ERROR_SHUTDOWN_IN_PROGRESS
A shutdown operation is already in progress.
0x00000FD9 – PEERDIST_ERROR_INVALIDATED
The supplied object has already been invalidated.
0x00000FDA – PEERDIST_ERROR_ALREADY_EXISTS
An element already exists and was not replaced.
0x00000FDB – PEERDIST_ERROR_OPERATION_NOTFOUND
Cannot cancel the requested operation as it has already been completed.
0x00000FDC – PEERDIST_ERROR_ALREADY_COMPLETED
Cannot perform the requested operation because it has already been carried out.
0x00000FDD – PEERDIST_ERROR_OUT_OF_BOUNDS
An operation accessed data beyond the bounds of valid data.
0x00000FDE – PEERDIST_ERROR_VERSION_UNSUPPORTED
The requested version is not supported.
0x00000FDF – PEERDIST_ERROR_INVALID_CONFIGURATION
A configuration value is invalid.
0x00000FE0 – PEERDIST_ERROR_NOT_LICENSED
The SKU is not licensed.
0x00000FE1 – PEERDIST_ERROR_SERVICE_UNAVAILABLE
PeerDist Service is still initializing and will be available shortly.
0x00001004 – ERROR_DHCP_ADDRESS_CONFLICT
The Dynamic Host Configuration Protocol (DHCP) client has obtained an IP address that is already in use on the network. The local interface will be disabled until the DHCP client can obtain a new address.
0x00001068 – ERROR_WMI_GUID_NOT_FOUND
The GUID passed was not recognized as valid by a WMI data provider.
0x00001069 – ERROR_WMI_INSTANCE_NOT_FOUND
The instance name passed was not recognized as valid by a WMI data provider.
0x0000106A – ERROR_WMI_ITEMID_NOT_FOUND
The data item ID passed was not recognized as valid by a WMI data provider.
0x0000106B – ERROR_WMI_TRY_AGAIN
The WMI request could not be completed and should be retried.
0x0000106C – ERROR_WMI_DP_NOT_FOUND
The WMI data provider could not be located.
0x0000106D – ERROR_WMI_UNRESOLVED_INSTANCE_REF
The WMI data provider references an instance set that has not been registered.
0x0000106E – ERROR_WMI_ALREADY_ENABLED
The WMI data block or event notification has already been enabled.
0x0000106F – ERROR_WMI_GUID_DISCONNECTED
The WMI data block is no longer available.
0x00001070 – ERROR_WMI_SERVER_UNAVAILABLE
The WMI data service is not available.
0x00001071 – ERROR_WMI_DP_FAILED
The WMI data provider failed to carry out the request.
0x00001072 – ERROR_WMI_INVALID_MOF
The WMI Managed Object Format (MOF) information is not valid.
0x00001073 – ERROR_WMI_INVALID_REGINFO
The WMI registration information is not valid.
0x00001074 – ERROR_WMI_ALREADY_DISABLED
The WMI data block or event notification has already been disabled.
0x00001075 – ERROR_WMI_READ_ONLY
The WMI data item or data block is read-only.
0x00001076 – ERROR_WMI_SET_FAILURE
The WMI data item or data block could not be changed.
0x000010CC – ERROR_INVALID_MEDIA
The media identifier does not represent a valid medium.
0x000010CD – ERROR_INVALID_LIBRARY
The library identifier does not represent a valid library.
0x000010CE – ERROR_INVALID_MEDIA_POOL
The media pool identifier does not represent a valid media pool.
0x000010CF – ERROR_DRIVE_MEDIA_MISMATCH
The drive and medium are not compatible, or they exist in different libraries.
0x000010D0 – ERROR_MEDIA_OFFLINE
The medium currently exists in an offline library and must be online to perform this operation.
0x000010D1 – ERROR_LIBRARY_OFFLINE
The operation cannot be performed on an offline library.
0x000010D2 – ERROR_EMPTY
The library, drive, or media pool is empty.
0x000010D3 – ERROR_NOT_EMPTY
The library, drive, or media pool must be empty to perform this operation.
0x000010D4 – ERROR_MEDIA_UNAVAILABLE
No media is currently available in this media pool or library.
0x000010D5 – ERROR_RESOURCE_DISABLED
A resource required for this operation is disabled.
0x000010D6 – ERROR_INVALID_CLEANER
The media identifier does not represent a valid cleaner.
0x000010D7 – ERROR_UNABLE_TO_CLEAN
The drive cannot be cleaned or does not support cleaning.
0x000010D8 – ERROR_OBJECT_NOT_FOUND
The object identifier does not represent a valid object.
0x000010D9 – ERROR_DATABASE_FAILURE
Unable to read from or write to the database.
0x000010DA – ERROR_DATABASE_FULL
The database is full.
0x000010DB – ERROR_MEDIA_INCOMPATIBLE
The medium is not compatible with the device or media pool.
0x000010DC – ERROR_RESOURCE_NOT_PRESENT
The resource required for this operation does not exist.
0x000010DD – ERROR_INVALID_OPERATION
The operation identifier is not valid.
0x000010DE – ERROR_MEDIA_NOT_AVAILABLE
The media is not mounted or ready for use.
0x000010DF – ERROR_DEVICE_NOT_AVAILABLE
The device is not ready for use.
0x000010E0 – ERROR_REQUEST_REFUSED
The operator or administrator has refused the request.
0x000010E1 – ERROR_INVALID_DRIVE_OBJECT
The drive identifier does not represent a valid drive.
0x000010E2 – ERROR_LIBRARY_FULL
Library is full. No slot is available for use.
0x000010E3 – ERROR_MEDIUM_NOT_ACCESSIBLE
The transport cannot access the medium.
0x000010E4 – ERROR_UNABLE_TO_LOAD_MEDIUM
Unable to load the medium into the drive.
0x000010E5 – ERROR_UNABLE_TO_INVENTORY_DRIVE
Unable to retrieve the drive status.
0x000010E6 – ERROR_UNABLE_TO_INVENTORY_SLOT
Unable to retrieve the slot status.
0x000010E7 – ERROR_UNABLE_TO_INVENTORY_TRANSPORT
Unable to retrieve status about the transport.
0x000010E8 – ERROR_TRANSPORT_FULL
Cannot use the transport because it is already in use.
0x000010E9 – ERROR_CONTROLLING_IEPORT
Unable to open or close the inject/eject port.
0x000010EA – ERROR_UNABLE_TO_EJECT_MOUNTED_MEDIA
Unable to eject the medium because it is in a drive.
0x000010EB – ERROR_CLEANER_SLOT_SET
A cleaner slot is already reserved.
0x000010EC – ERROR_CLEANER_SLOT_NOT_SET
A cleaner slot is not reserved.
0x000010ED – ERROR_CLEANER_CARTRIDGE_SPENT
The cleaner cartridge has performed the maximum number of drive cleanings.
0x000010EE – ERROR_UNEXPECTED_OMID
Unexpected on-medium identifier.
0x000010EF – ERROR_CANT_DELETE_LAST_ITEM
The last remaining item in this group or resource cannot be deleted.
0x000010F0 – ERROR_MESSAGE_EXCEEDS_MAX_SIZE
The message provided exceeds the maximum size allowed for this parameter.
0x000010F1 – ERROR_VOLUME_CONTAINS_SYS_FILES
The volume contains system or paging files.
0x000010F2 – ERROR_INDIGENOUS_TYPE
The media type cannot be removed from this library because at least one drive in the library reports it can support this media type.
0x000010F3 – ERROR_NO_SUPPORTING_DRIVES
This offline media cannot be mounted on this system because no enabled drives are present that can be used.
0x000010F4 – ERROR_CLEANER_CARTRIDGE_INSTALLED
A cleaner cartridge is present in the tape library.
0x000010F5 – ERROR_IEPORT_FULL
Cannot use the IEport because it is not empty.
0x000010FE – ERROR_FILE_OFFLINE
The remote storage service was not able to recall the file.
0x000010FF – ERROR_REMOTE_STORAGE_NOT_ACTIVE
The remote storage service is not operational at this time.
0x00001100 – ERROR_REMOTE_STORAGE_MEDIA_ERROR
The remote storage service encountered a media error.
0x00001126 – ERROR_NOT_A_REPARSE_POINT
The file or directory is not a reparse point.
0x00001127 – ERROR_REPARSE_ATTRIBUTE_CONFLICT
The reparse point attribute cannot be set because it conflicts with an existing attribute.
0x00001128 – ERROR_INVALID_REPARSE_DATA
The data present in the reparse point buffer is invalid.
0x00001129 – ERROR_REPARSE_TAG_INVALID
The tag present in the reparse point buffer is invalid.
0x0000112A – ERROR_REPARSE_TAG_MISMATCH
There is a mismatch between the tag specified in the request and the tag present in the reparse point.
0x00001194 – ERROR_VOLUME_NOT_SIS_ENABLED
Single Instance Storage (SIS) is not available on this volume.
0x00001389 – ERROR_DEPENDENT_RESOURCE_EXISTS
The operation cannot be completed because other resources depend on this resource.
0x0000138A – ERROR_DEPENDENCY_NOT_FOUND
The cluster resource dependency cannot be found.
0x0000138B – ERROR_DEPENDENCY_ALREADY_EXISTS
The cluster resource cannot be made dependent on the specified resource because it is already dependent.
0x0000138C – ERROR_RESOURCE_NOT_ONLINE
The cluster resource is not online.
0x0000138D – ERROR_HOST_NODE_NOT_AVAILABLE
A cluster node is not available for this operation.
0x0000138E – ERROR_RESOURCE_NOT_AVAILABLE
The cluster resource is not available.
0x0000138F – ERROR_RESOURCE_NOT_FOUND
The cluster resource could not be found.
0x00001390 – ERROR_SHUTDOWN_CLUSTER
The cluster is being shut down.
0x00001391 – ERROR_CANT_EVICT_ACTIVE_NODE
A cluster node cannot be evicted from the cluster unless the node is down or it is the last node.
0x00001392 – ERROR_OBJECT_ALREADY_EXISTS
The object already exists.
0x00001393 – ERROR_OBJECT_IN_LIST
The object is already in the list.
0x00001394 – ERROR_GROUP_NOT_AVAILABLE
The cluster group is not available for any new requests.
0x00001395 – ERROR_GROUP_NOT_FOUND
The cluster group could not be found.
0x00001396 – ERROR_GROUP_NOT_ONLINE
The operation could not be completed because the cluster group is not online.
0x00001397 – ERROR_HOST_NODE_NOT_RESOURCE_OWNER
The operation failed because either the specified cluster node is not the owner of the resource, or the node is not a possible owner of the resource.
0x00001398 – ERROR_HOST_NODE_NOT_GROUP_OWNER
The operation failed because either the specified cluster node is not the owner of the group, or the node is not a possible owner of the group.
0x00001399 – ERROR_RESMON_CREATE_FAILED
The cluster resource could not be created in the specified resource monitor.
0x0000139A – ERROR_RESMON_ONLINE_FAILED
The cluster resource could not be brought online by the resource monitor.
0x0000139B – ERROR_RESOURCE_ONLINE
The operation could not be completed because the cluster resource is online.
0x0000139C – ERROR_QUORUM_RESOURCE
The cluster resource could not be deleted or brought offline because it is the quorum resource.
0x0000139D – ERROR_NOT_QUORUM_CAPABLE
The cluster could not make the specified resource a quorum resource because it is not capable of being a quorum resource.
0x0000139E – ERROR_CLUSTER_SHUTTING_DOWN
The cluster software is shutting down.
0x0000139F – ERROR_INVALID_STATE
The group or resource is not in the correct state to perform the requested operation.
0x000013A0 – ERROR_RESOURCE_PROPERTIES_STORED
The properties were stored but not all changes will take effect until the next time the resource is brought online.
0x000013A1 – ERROR_NOT_QUORUM_CLASS
The cluster could not make the specified resource a quorum resource because it does not belong to a shared storage class.
0x000013A2 – ERROR_CORE_RESOURCE
The cluster resource could not be deleted because it is a core resource.
0x000013A3 – ERROR_QUORUM_RESOURCE_ONLINE_FAILED
The quorum resource failed to come online.
0x000013A4 – ERROR_QUORUMLOG_OPEN_FAILED
The quorum log could not be created or mounted successfully.
0x000013A5 – ERROR_CLUSTERLOG_CORRUPT
The cluster log is corrupt.
0x000013A6 – ERROR_CLUSTERLOG_RECORD_EXCEEDS_MAXSIZE
The record could not be written to the cluster log because it exceeds the maximum size.
0x000013A7 – ERROR_CLUSTERLOG_EXCEEDS_MAXSIZE
The cluster log exceeds its maximum size.
0x000013A8 – ERROR_CLUSTERLOG_CHKPOINT_NOT_FOUND
No checkpoint record was found in the cluster log.
0x000013A9 – ERROR_CLUSTERLOG_NOT_ENOUGH_SPACE
The minimum required disk space needed for logging is not available.
0x000013AA – ERROR_QUORUM_OWNER_ALIVE
The cluster node failed to take control of the quorum resource because the resource is owned by another active node.
0x000013AB – ERROR_NETWORK_NOT_AVAILABLE
A cluster network is not available for this operation.
0x000013AC – ERROR_NODE_NOT_AVAILABLE
A cluster node is not available for this operation.
0x000013AD – ERROR_ALL_NODES_NOT_AVAILABLE
All cluster nodes must be running to perform this operation.
0x000013AE – ERROR_RESOURCE_FAILED
A cluster resource failed.
0x000013AF – ERROR_CLUSTER_INVALID_NODE
The cluster node is not valid.
0x000013B0 – ERROR_CLUSTER_NODE_EXISTS
The cluster node already exists.
0x000013B1 – ERROR_CLUSTER_JOIN_IN_PROGRESS
A node is in the process of joining the cluster.
0x000013B2 – ERROR_CLUSTER_NODE_NOT_FOUND
The cluster node was not found.
0x000013B3 – ERROR_CLUSTER_LOCAL_NODE_NOT_FOUND
The cluster local node information was not found.
0x000013B4 – ERROR_CLUSTER_NETWORK_EXISTS
The cluster network already exists.
0x000013B5 – ERROR_CLUSTER_NETWORK_NOT_FOUND
The cluster network was not found.
0x000013B6 – ERROR_CLUSTER_NETINTERFACE_EXISTS
The cluster network interface already exists.
0x000013B7 – ERROR_CLUSTER_NETINTERFACE_NOT_FOUND
The cluster network interface was not found.
0x000013B8 – ERROR_CLUSTER_INVALID_REQUEST
The cluster request is not valid for this object.
0x000013B9 – ERROR_CLUSTER_INVALID_NETWORK_PROVIDER
The cluster network provider is not valid.
0x000013BA – ERROR_CLUSTER_NODE_DOWN
The cluster node is down.
0x000013BB – ERROR_CLUSTER_NODE_UNREACHABLE
The cluster node is not reachable.
0x000013BC – ERROR_CLUSTER_NODE_NOT_MEMBER
The cluster node is not a member of the cluster.
0x000013BD – ERROR_CLUSTER_JOIN_NOT_IN_PROGRESS
A cluster join operation is not in progress.
0x000013BE – ERROR_CLUSTER_INVALID_NETWORK
The cluster network is not valid.
0x000013C0 – ERROR_CLUSTER_NODE_UP
The cluster node is up.
0x000013C1 – ERROR_CLUSTER_IPADDR_IN_USE
The cluster IP address is already in use.
0x000013C2 – ERROR_CLUSTER_NODE_NOT_PAUSED
The cluster node is not paused.
0x000013C3 – ERROR_CLUSTER_NO_SECURITY_CONTEXT
No cluster security context is available.
0x000013C4 – ERROR_CLUSTER_NETWORK_NOT_INTERNAL
The cluster network is not configured for internal cluster communication.
0x000013C5 – ERROR_CLUSTER_NODE_ALREADY_UP
The cluster node is already up.
0x000013C6 – ERROR_CLUSTER_NODE_ALREADY_DOWN
The cluster node is already down.
0x000013C7 – ERROR_CLUSTER_NETWORK_ALREADY_ONLINE
The cluster network is already online.
0x000013C8 – ERROR_CLUSTER_NETWORK_ALREADY_OFFLINE
The cluster network is already offline.
0x000013C9 – ERROR_CLUSTER_NODE_ALREADY_MEMBER
The cluster node is already a member of the cluster.
0x000013CA – ERROR_CLUSTER_LAST_INTERNAL_NETWORK
The cluster network is the only one configured for internal cluster communication between two or more active cluster nodes. The internal communication capability cannot be removed from the network.
0x000013CB – ERROR_CLUSTER_NETWORK_HAS_DEPENDENTS
One or more cluster resources depend on the network to provide service to clients. The client access capability cannot be removed from the network.
0x000013CC – ERROR_INVALID_OPERATION_ON_QUORUM
This operation cannot be performed on the cluster resource because it is the quorum resource. This quorum resource cannot be brought offline and its possible owners list cannot be modified.
0x000013CD – ERROR_DEPENDENCY_NOT_ALLOWED
The cluster quorum resource is not allowed to have any dependencies.
0x000013CE – ERROR_CLUSTER_NODE_PAUSED
The cluster node is paused.
0x000013CF – ERROR_NODE_CANT_HOST_RESOURCE
The cluster resource cannot be brought online. The owner node cannot run this resource.
0x000013D0 – ERROR_CLUSTER_NODE_NOT_READY
The cluster node is not ready to perform the requested operation.
0x000013D1 – ERROR_CLUSTER_NODE_SHUTTING_DOWN
The cluster node is shutting down.
0x000013D2 – ERROR_CLUSTER_JOIN_ABORTED
The cluster join operation was aborted.
0x000013D3 – ERROR_CLUSTER_INCOMPATIBLE_VERSIONS
The cluster join operation failed due to incompatible software versions between the joining node and its sponsor.
0x000013D4 – ERROR_CLUSTER_MAXNUM_OF_RESOURCES_EXCEEDED
This resource cannot be created because the cluster has reached the limit on the number of resources it can monitor.
0x000013D5 – ERROR_CLUSTER_SYSTEM_CONFIG_CHANGED
The system configuration changed during the cluster join or form operation. The join or form operation was aborted.
0x000013D6 – ERROR_CLUSTER_RESOURCE_TYPE_NOT_FOUND
The specified resource type was not found.
0x000013D7 – ERROR_CLUSTER_RESTYPE_NOT_SUPPORTED
The specified node does not support a resource of this type. This might be due to version inconsistencies or due to the absence of the resource DLL on this node.
0x000013D8 – ERROR_CLUSTER_RESNAME_NOT_FOUND
The specified resource name is not supported by this resource DLL. This might be due to a bad (or changed) name supplied to the resource DLL.
0x000013D9 – ERROR_CLUSTER_NO_RPC_PACKAGES_REGISTERED
No authentication package could be registered with the RPC server.
0x000013DA – ERROR_CLUSTER_OWNER_NOT_IN_PREFLIST
You cannot bring the group online because the owner of the group is not in the preferred list for the group. To change the owner node for the group, move the group.
0x000013DB – ERROR_CLUSTER_DATABASE_SEQMISMATCH
The join operation failed because the cluster database sequence number has changed or is incompatible with the locker node. This can happen during a join operation if the cluster database was changing during the join.
0x000013DC – ERROR_RESMON_INVALID_STATE
The resource monitor will not allow the fail operation to be performed while the resource is in its current state. This can happen if the resource is in a pending state.
0x000013DD – ERROR_CLUSTER_GUM_NOT_LOCKER
A non-locker code received a request to reserve the lock for making global updates.
0x000013DE – ERROR_QUORUM_DISK_NOT_FOUND
The quorum disk could not be located by the cluster service.
0x000013DF – ERROR_DATABASE_BACKUP_CORRUPT
The backed-up cluster database is possibly corrupt.
0x000013E0 – ERROR_CLUSTER_NODE_ALREADY_HAS_DFS_ROOT
A DFS root already exists in this cluster node.
0x000013E1 – ERROR_RESOURCE_PROPERTY_UNCHANGEABLE
An attempt to modify a resource property failed because it conflicts with another existing property.
0x00001702 – ERROR_CLUSTER_MEMBERSHIP_INVALID_STATE
An operation was attempted that is incompatible with the current membership state of the node.
0x00001703 – ERROR_CLUSTER_QUORUMLOG_NOT_FOUND
The quorum resource does not contain the quorum log.
0x00001704 – ERROR_CLUSTER_MEMBERSHIP_HALT
The membership engine requested shutdown of the cluster service on this node.
0x00001705 – ERROR_CLUSTER_INSTANCE_ID_MISMATCH
The join operation failed because the cluster instance ID of the joining node does not match the cluster instance ID of the sponsor node.
0x00001706 – ERROR_CLUSTER_NETWORK_NOT_FOUND_FOR_IP
A matching cluster network for the specified IP address could not be found.
0x00001707 – ERROR_CLUSTER_PROPERTY_DATA_TYPE_MISMATCH
The actual data type of the property did not match the expected data type of the property.
0x00001708 – ERROR_CLUSTER_EVICT_WITHOUT_CLEANUP
The cluster node was evicted from the cluster successfully, but the node was not cleaned up. To determine what clean-up steps failed and how to recover, see the Failover Clustering application event log using Event Viewer.
0x00001709 – ERROR_CLUSTER_PARAMETER_MISMATCH
Two or more parameter values specified for a resource's properties are in conflict.
0x0000170A – ERROR_NODE_CANNOT_BE_CLUSTERED
This computer cannot be made a member of a cluster.
0x0000170B – ERROR_CLUSTER_WRONG_OS_VERSION
This computer cannot be made a member of a cluster because it does not have the correct version of Windows installed.
0x0000170C – ERROR_CLUSTER_CANT_CREATE_DUP_CLUSTER_NAME
A cluster cannot be created with the specified cluster name because that cluster name is already in use. Specify a different name for the cluster.
0x0000170D – ERROR_CLUSCFG_ALREADY_COMMITTED
The cluster configuration action has already been committed.
0x0000170E – ERROR_CLUSCFG_ROLLBACK_FAILED
The cluster configuration action could not be rolled back.
0x0000170F – ERROR_CLUSCFG_SYSTEM_DISK_DRIVE_LETTER_CONFLICT
The drive letter assigned to a system disk on one node conflicted with the drive letter assigned to a disk on another node.
0x00001710 – ERROR_CLUSTER_OLD_VERSION
One or more nodes in the cluster are running a version of Windows that does not support this operation.
0x00001711 – ERROR_CLUSTER_MISMATCHED_COMPUTER_ACCT_NAME
The name of the corresponding computer account does not match the network name for this resource.
0x00001712 – ERROR_CLUSTER_NO_NET_ADAPTERS
No network adapters are available.
0x00001713 – ERROR_CLUSTER_POISONED
The cluster node has been poisoned.
0x00001714 – ERROR_CLUSTER_GROUP_MOVING
The group is unable to accept the request because it is moving to another node.
0x00001715 – ERROR_CLUSTER_RESOURCE_TYPE_BUSY
The resource type cannot accept the request because it is too busy performing another operation.
0x00001716 – ERROR_RESOURCE_CALL_TIMED_OUT
The call to the cluster resource DLL timed out.
0x00001717 – ERROR_INVALID_CLUSTER_IPV6_ADDRESS
The address is not valid for an IPv6 Address resource. A global IPv6 address is required, and it must match a cluster network. Compatibility addresses are not permitted.
0x00001718 – ERROR_CLUSTER_INTERNAL_INVALID_FUNCTION
An internal cluster error occurred. A call to an invalid function was attempted.
0x00001719 – ERROR_CLUSTER_PARAMETER_OUT_OF_BOUNDS
A parameter value is out of acceptable range.
0x0000171A – ERROR_CLUSTER_PARTIAL_SEND
A network error occurred while sending data to another node in the cluster. The number of bytes transmitted was less than required.
0x0000171B – ERROR_CLUSTER_REGISTRY_INVALID_FUNCTION
An invalid cluster registry operation was attempted.
0x0000171C – ERROR_CLUSTER_INVALID_STRING_TERMINATION
An input string of characters is not properly terminated.
0x0000171D – ERROR_CLUSTER_INVALID_STRING_FORMAT
An input string of characters is not in a valid format for the data it represents.
0x0000171E – ERROR_CLUSTER_DATABASE_TRANSACTION_IN_PROGRESS
An internal cluster error occurred. A cluster database transaction was attempted while a transaction was already in progress.
0x0000171F – ERROR_CLUSTER_DATABASE_TRANSACTION_NOT_IN_PROGRESS
An internal cluster error occurred. There was an attempt to commit a cluster database transaction while no transaction was in progress.
0x00001720 – ERROR_CLUSTER_NULL_DATA
An internal cluster error occurred. Data was not properly initialized.
0x00001721 – ERROR_CLUSTER_PARTIAL_READ
An error occurred while reading from a stream of data. An unexpected number of bytes was returned.
0x00001722 – ERROR_CLUSTER_PARTIAL_WRITE
An error occurred while writing to a stream of data. The required number of bytes could not be written.
0x00001723 – ERROR_CLUSTER_CANT_DESERIALIZE_DATA
An error occurred while deserializing a stream of cluster data.
0x00001724 – ERROR_DEPENDENT_RESOURCE_PROPERTY_CONFLICT
One or more property values for this resource are in conflict with one or more property values associated with its dependent resources.
0x00001725 – ERROR_CLUSTER_NO_QUORUM
A quorum of cluster nodes was not present to form a cluster.
0x00001726 – ERROR_CLUSTER_INVALID_IPV6_NETWORK
The cluster network is not valid for an IPv6 address resource, or it does not match the configured address.
0x00001727 – ERROR_CLUSTER_INVALID_IPV6_TUNNEL_NETWORK
The cluster network is not valid for an IPv6 tunnel resource. Check the configuration of the IP Address resource on which the IPv6 tunnel resource depends.
0x00001728 – ERROR_QUORUM_NOT_ALLOWED_IN_THIS_GROUP
Quorum resource cannot reside in the available storage group.
0x00001770 – ERROR_ENCRYPTION_FAILED
The specified file could not be encrypted.
0x00001771 – ERROR_DECRYPTION_FAILED
The specified file could not be decrypted.
0x00001772 – ERROR_FILE_ENCRYPTED
The specified file is encrypted and the user does not have the ability to decrypt it.
0x00001773 – ERROR_NO_RECOVERY_POLICY
There is no valid encryption recovery policy configured for this system.
0x00001774 – ERROR_NO_EFS
The required encryption driver is not loaded for this system.
0x00001775 – ERROR_WRONG_EFS
The file was encrypted with a different encryption driver than is currently loaded.
0x00001776 – ERROR_NO_USER_KEYS
There are no Encrypting File System (EFS) keys defined for the user.
0x00001777 – ERROR_FILE_NOT_ENCRYPTED
The specified file is not encrypted.
0x00001778 – ERROR_NOT_EXPORT_FORMAT
The specified file is not in the defined EFS export format.
0x00001779 – ERROR_FILE_READ_ONLY
The specified file is read-only.
0x0000177A – ERROR_DIR_EFS_DISALLOWED
The directory has been disabled for encryption.
0x0000177B – ERROR_EFS_SERVER_NOT_TRUSTED
The server is not trusted for remote encryption operation.
0x0000177C – ERROR_BAD_RECOVERY_POLICY
Recovery policy configured for this system contains invalid recovery certificate.
0x0000177D – ERROR_EFS_ALG_BLOB_TOO_BIG
The encryption algorithm used on the source file needs a bigger key buffer than the one on the destination file.
0x0000177E – ERROR_VOLUME_NOT_SUPPORT_EFS
The disk partition does not support file encryption.
0x0000177F – ERROR_EFS_DISABLED
This machine is disabled for file encryption.
0x00001780 – ERROR_EFS_VERSION_NOT_SUPPORT
A newer system is required to decrypt this encrypted file.
0x00001781 – ERROR_CS_ENCRYPTION_INVALID_SERVER_RESPONSE
The remote server sent an invalid response for a file being opened with client-side encryption.
0x00001782 – ERROR_CS_ENCRYPTION_UNSUPPORTED_SERVER
Client-side encryption is not supported by the remote server even though it claims to support it.
0x00001783 – ERROR_CS_ENCRYPTION_EXISTING_ENCRYPTED_FILE
File is encrypted and should be opened in client-side encryption mode.
0x00001784 – ERROR_CS_ENCRYPTION_NEW_ENCRYPTED_FILE
A new encrypted file is being created and a $EFS needs to be provided.
0x00001785 – ERROR_CS_ENCRYPTION_FILE_NOT_CSE
The SMB client requested a client-side extension (CSE) file system control (FSCTL) on a non-CSE file.
0x000017E6 – ERROR_NO_BROWSER_SERVERS_FOUND
The list of servers for this workgroup is not currently available
0x00001838 – SCHED_E_SERVICE_NOT_LOCALSYSTEM
The Task Scheduler service must be configured to run in the System account to function properly. Individual tasks can be configured to run in other accounts.
0x000019C8 – ERROR_LOG_SECTOR_INVALID
The log service encountered an invalid log sector.
0x000019C9 – ERROR_LOG_SECTOR_PARITY_INVALID
The log service encountered a log sector with invalid block parity.
0x000019CA – ERROR_LOG_SECTOR_REMAPPED
The log service encountered a remapped log sector.
0x000019CB – ERROR_LOG_BLOCK_INCOMPLETE
The log service encountered a partial or incomplete log block.
0x000019CC – ERROR_LOG_INVALID_RANGE
The log service encountered an attempt to access data outside the active log range.
0x000019CD – ERROR_LOG_BLOCKS_EXHAUSTED
The log service user marshaling buffers are exhausted.
0x000019CE – ERROR_LOG_READ_CONTEXT_INVALID
The log service encountered an attempt to read from a marshaling area with an invalid read context.
0x000019CF – ERROR_LOG_RESTART_INVALID
The log service encountered an invalid log restart area.
0x000019D0 – ERROR_LOG_BLOCK_VERSION
The log service encountered an invalid log block version.
0x000019D1 – ERROR_LOG_BLOCK_INVALID
The log service encountered an invalid log block.
0x000019D2 – ERROR_LOG_READ_MODE_INVALID
The log service encountered an attempt to read the log with an invalid read mode.
0x000019D3 – ERROR_LOG_NO_RESTART
The log service encountered a log stream with no restart area.
0x000019D4 – ERROR_LOG_METADATA_CORRUPT
The log service encountered a corrupted metadata file.
0x000019D5 – ERROR_LOG_METADATA_INVALID
The log service encountered a metadata file that could not be created by the log file system.
0x000019D6 – ERROR_LOG_METADATA_INCONSISTENT
The log service encountered a metadata file with inconsistent data.
0x000019D7 – ERROR_LOG_RESERVATION_INVALID
The log service encountered an attempt to erroneous allocate or dispose reservation space.
0x000019D8 – ERROR_LOG_CANT_DELETE
The log service cannot delete a log file or file system container.
0x000019D9 – ERROR_LOG_CONTAINER_LIMIT_EXCEEDED
The log service has reached the maximum allowable containers allocated to a log file.
0x000019DA – ERROR_LOG_START_OF_LOG
The log service has attempted to read or write backward past the start of the log.
0x000019DB – ERROR_LOG_POLICY_ALREADY_INSTALLED
The log policy could not be installed because a policy of the same type is already present.
0x000019DC – ERROR_LOG_POLICY_NOT_INSTALLED
The log policy in question was not installed at the time of the request.
0x000019DD – ERROR_LOG_POLICY_INVALID
The installed set of policies on the log is invalid.
0x000019DE – ERROR_LOG_POLICY_CONFLICT
A policy on the log in question prevented the operation from completing.
0x000019DF – ERROR_LOG_PINNED_ARCHIVE_TAIL
Log space cannot be reclaimed because the log is pinned by the archive tail.
0x000019E0 – ERROR_LOG_RECORD_NONEXISTENT
The log record is not a record in the log file.
0x000019E1 – ERROR_LOG_RECORDS_RESERVED_INVALID
The number of reserved log records or the adjustment of the number of reserved log records is invalid.
0x000019E2 – ERROR_LOG_SPACE_RESERVED_INVALID
The reserved log space or the adjustment of the log space is invalid.
0x000019E3 – ERROR_LOG_TAIL_INVALID
A new or existing archive tail or base of the active log is invalid.
0x000019E4 – ERROR_LOG_FULL
The log space is exhausted.
0x000019E5 – ERROR_COULD_NOT_RESIZE_LOG
The log could not be set to the requested size.
0x000019E6 – ERROR_LOG_MULTIPLEXED
The log is multiplexed; no direct writes to the physical log are allowed.
0x000019E7 – ERROR_LOG_DEDICATED
The operation failed because the log is a dedicated log.
0x000019E8 – ERROR_LOG_ARCHIVE_NOT_IN_PROGRESS
The operation requires an archive context.
0x000019E9 – ERROR_LOG_ARCHIVE_IN_PROGRESS
Log archival is in progress.
0x000019EA – ERROR_LOG_EPHEMERAL
The operation requires a non-ephemeral log, but the log is ephemeral.
0x000019EB – ERROR_LOG_NOT_ENOUGH_CONTAINERS
The log must have at least two containers before it can be read from or written to.
0x000019EC – ERROR_LOG_CLIENT_ALREADY_REGISTERED
A log client has already registered on the stream.
0x000019ED – ERROR_LOG_CLIENT_NOT_REGISTERED
A log client has not been registered on the stream.
0x000019EE – ERROR_LOG_FULL_HANDLER_IN_PROGRESS
A request has already been made to handle the log full condition.
0x000019EF – ERROR_LOG_CONTAINER_READ_FAILED
The log service encountered an error when attempting to read from a log container.
0x000019F0 – ERROR_LOG_CONTAINER_WRITE_FAILED
The log service encountered an error when attempting to write to a log container.
0x000019F1 – ERROR_LOG_CONTAINER_OPEN_FAILED
The log service encountered an error when attempting to open a log container.
0x000019F2 – ERROR_LOG_CONTAINER_STATE_INVALID
The log service encountered an invalid container state when attempting a requested action.
0x000019F3 – ERROR_LOG_STATE_INVALID
The log service is not in the correct state to perform a requested action.
0x000019F4 – ERROR_LOG_PINNED
The log space cannot be reclaimed because the log is pinned.
0x000019F5 – ERROR_LOG_METADATA_FLUSH_FAILED
The log metadata flush failed.
0x000019F6 – ERROR_LOG_INCONSISTENT_SECURITY
Security on the log and its containers is inconsistent.
0x000019F7 – ERROR_LOG_APPENDED_FLUSH_FAILED
Records were appended to the log or reservation changes were made, but the log could not be flushed.
0x000019F8 – ERROR_LOG_PINNED_RESERVATION
The log is pinned due to reservation consuming most of the log space. Free some reserved records to make space available.
0x00001A2C – ERROR_INVALID_TRANSACTION
The transaction handle associated with this operation is not valid.
0x00001A2D – ERROR_TRANSACTION_NOT_ACTIVE
The requested operation was made in the context of a transaction that is no longer active.
0x00001A2E – ERROR_TRANSACTION_REQUEST_NOT_VALID
The requested operation is not valid on the transaction object in its current state.
0x00001A2F – ERROR_TRANSACTION_NOT_REQUESTED
The caller has called a response API, but the response is not expected because the transaction manager did not issue the corresponding request to the caller.
0x00001A30 – ERROR_TRANSACTION_ALREADY_ABORTED
It is too late to perform the requested operation because the transaction has already been aborted.
0x00001A31 – ERROR_TRANSACTION_ALREADY_COMMITTED
It is too late to perform the requested operation because the transaction has already been committed.
0x00001A32 – ERROR_TM_INITIALIZATION_FAILED
The transaction manager was unable to be successfully initialized. Transacted operations are not supported.
0x00001A33 – ERROR_RESOURCEMANAGER_READ_ONLY
The specified resource manager made no changes or updates to the resource under this transaction.
0x00001A34 – ERROR_TRANSACTION_NOT_JOINED
The resource manager has attempted to prepare a transaction that it has not successfully joined.
0x00001A35 – ERROR_TRANSACTION_SUPERIOR_EXISTS
The transaction object already has a superior enlistment, and the caller attempted an operation that would have created a new superior. Only a single superior enlistment is allowed.
0x00001A36 – ERROR_CRM_PROTOCOL_ALREADY_EXISTS
The resource manager tried to register a protocol that already exists.
0x00001A37 – ERROR_TRANSACTION_PROPAGATION_FAILED
The attempt to propagate the transaction failed.
0x00001A38 – ERROR_CRM_PROTOCOL_NOT_FOUND
The requested propagation protocol was not registered as a CRM.
0x00001A39 – ERROR_TRANSACTION_INVALID_MARSHALL_BUFFER
The buffer passed in to PushTransaction or PullTransaction is not in a valid format.
0x00001A3A – ERROR_CURRENT_TRANSACTION_NOT_VALID
The current transaction context associated with the thread is not a valid handle to a transaction object.
0x00001A3B – ERROR_TRANSACTION_NOT_FOUND
The specified transaction object could not be opened because it was not found.
0x00001A3C – ERROR_RESOURCEMANAGER_NOT_FOUND
The specified resource manager object could not be opened because it was not found.
0x00001A3D – ERROR_ENLISTMENT_NOT_FOUND
The specified enlistment object could not be opened because it was not found.
0x00001A3E – ERROR_TRANSACTIONMANAGER_NOT_FOUND
The specified transaction manager object could not be opened because it was not found.
0x00001A3F – ERROR_TRANSACTIONMANAGER_NOT_ONLINE
The specified resource manager was unable to create an enlistment because its associated transaction manager is not online.
0x00001A40 – ERROR_TRANSACTIONMANAGER_RECOVERY_NAME_COLLISION
The specified transaction manager was unable to create the objects contained in its log file in the ObjectB namespace. Therefore, the transaction manager was unable to recover.
0x00001A90 – ERROR_TRANSACTIONAL_CONFLICT
The function attempted to use a name that is reserved for use by another transaction.
0x00001A91 – ERROR_RM_NOT_ACTIVE
Transaction support within the specified file system resource manager is not started or was shut down due to an error.
0x00001A92 – ERROR_RM_METADATA_CORRUPT
The metadata of the resource manager has been corrupted. The resource manager will not function.
0x00001A93 – ERROR_DIRECTORY_NOT_RM
The specified directory does not contain a resource manager.
0x00001A95 – ERROR_TRANSACTIONS_UNSUPPORTED_REMOTE
The remote server or share does not support transacted file operations.
0x00001A96 – ERROR_LOG_RESIZE_INVALID_SIZE
The requested log size is invalid.
0x00001A97 – ERROR_OBJECT_NO_LONGER_EXISTS
The object (file, stream, link) corresponding to the handle has been deleted by a transaction savepoint rollback.
0x00001A98 – ERROR_STREAM_MINIVERSION_NOT_FOUND
The specified file miniversion was not found for this transacted file open.
0x00001A99 – ERROR_STREAM_MINIVERSION_NOT_VALID
The specified file miniversion was found but has been invalidated. The most likely cause is a transaction savepoint rollback.
0x00001A9A – ERROR_MINIVERSION_INACCESSIBLE_FROM_SPECIFIED_TRANSACTION
A miniversion can only be opened in the context of the transaction that created it.
0x00001A9B – ERROR_CANT_OPEN_MINIVERSION_WITH_MODIFY_INTENT
It is not possible to open a miniversion with modify access.
0x00001A9C – ERROR_CANT_CREATE_MORE_STREAM_MINIVERSIONS
It is not possible to create any more miniversions for this stream.
0x00001A9E – ERROR_REMOTE_FILE_VERSION_MISMATCH
The remote server sent mismatching version numbers or FID for a file opened with transactions.
0x00001A9F – ERROR_HANDLE_NO_LONGER_VALID
The handle has been invalidated by a transaction. The most likely cause is the presence of memory mapping on a file, or an open handle when the transaction ended or rolled back to savepoint.
0x00001AA0 – ERROR_NO_TXF_METADATA
There is no transaction metadata on the file.
0x00001AA1 – ERROR_LOG_CORRUPTION_DETECTED
The log data is corrupt.
0x00001AA2 – ERROR_CANT_RECOVER_WITH_HANDLE_OPEN
The file cannot be recovered because a handle is still open on it.
0x00001AA3 – ERROR_RM_DISCONNECTED
The transaction outcome is unavailable because the resource manager responsible for it is disconnected.
0x00001AA4 – ERROR_ENLISTMENT_NOT_SUPERIOR
The request was rejected because the enlistment in question is not a superior enlistment.
0x00001AA5 – ERROR_RECOVERY_NOT_NEEDED
The transactional resource manager is already consistent. Recovery is not needed.
0x00001AA6 – ERROR_RM_ALREADY_STARTED
The transactional resource manager has already been started.
0x00001AA7 – ERROR_FILE_IDENTITY_NOT_PERSISTENT
The file cannot be opened in a transaction because its identity depends on the outcome of an unresolved transaction.
0x00001AA8 – ERROR_CANT_BREAK_TRANSACTIONAL_DEPENDENCY
The operation cannot be performed because another transaction is depending on the fact that this property will not change.
0x00001AA9 – ERROR_CANT_CROSS_RM_BOUNDARY
The operation would involve a single file with two transactional resource managers and is therefore not allowed.
0x00001AAA – ERROR_TXF_DIR_NOT_EMPTY
The $Txf directory must be empty for this operation to succeed.
0x00001AAB – ERROR_INDOUBT_TRANSACTIONS_EXIST
The operation would leave a transactional resource manager in an inconsistent state and is, therefore, not allowed.
0x00001AAC – ERROR_TM_VOLATILE
The operation could not be completed because the transaction manager does not have a log.
0x00001AAD – ERROR_ROLLBACK_TIMER_EXPIRED
A rollback could not be scheduled because a previously scheduled rollback has already been executed or is queued for execution.
0x00001AAE – ERROR_TXF_ATTRIBUTE_CORRUPT
The transactional metadata attribute on the file or directory is corrupt and unreadable.
0x00001AAF – ERROR_EFS_NOT_ALLOWED_IN_TRANSACTION
The encryption operation could not be completed because a transaction is active.
0x00001AB0 – ERROR_TRANSACTIONAL_OPEN_NOT_ALLOWED
This object is not allowed to be opened in a transaction.
0x00001AB1 – ERROR_LOG_GROWTH_FAILED
An attempt to create space in the transactional resource manager's log failed. The failure status has been recorded in the event log.
0x00001AB2 – ERROR_TRANSACTED_MAPPING_UNSUPPORTED_REMOTE
Memory mapping (creating a mapped section) to a remote file under a transaction is not supported.
0x00001AB3 – ERROR_TXF_METADATA_ALREADY_PRESENT
Transaction metadata is already present on this file and cannot be superseded.
0x00001AB4 – ERROR_TRANSACTION_SCOPE_CALLBACKS_NOT_SET
A transaction scope could not be entered because the scope handler has not been initialized.
0x00001AB5 – ERROR_TRANSACTION_REQUIRED_PROMOTION
Promotion was required to allow the resource manager to enlist, but the transaction was set to disallow it.
0x00001AB6 – ERROR_CANNOT_EXECUTE_FILE_IN_TRANSACTION
This file is open for modification in an unresolved transaction and can be opened for execution only by a transacted reader.
0x00001AB7 – ERROR_TRANSACTIONS_NOT_FROZEN
The request to thaw frozen transactions was ignored because transactions were not previously frozen.
0x00001AB8 – ERROR_TRANSACTION_FREEZE_IN_PROGRESS
Transactions cannot be frozen because a freeze is already in progress.
0x00001AB9 – ERROR_NOT_SNAPSHOT_VOLUME
The target volume is not a snapshot volume. This operation is only valid on a volume mounted as a snapshot.
0x00001ABA – ERROR_NO_SAVEPOINT_WITH_OPEN_FILES
The savepoint operation failed because files are open on the transaction. This is not permitted.
0x00001ABB – ERROR_DATA_LOST_REPAIR
Windows has discovered corruption in a file, and that file has since been repaired. Data loss might have occurred.
0x00001ABC – ERROR_SPARSE_NOT_ALLOWED_IN_TRANSACTION
The sparse operation could not be completed because a transaction is active on the file.
0x00001ABD – ERROR_TM_IDENTITY_MISMATCH
The call to create a transaction manager object failed because the Tm Identity stored in the logfile does not match the Tm Identity that was passed in as an argument.
0x00001ABE – ERROR_FLOATED_SECTION
I/O was attempted on a section object that has been floated as a result of a transaction ending. There is no valid data.
0x00001ABF – ERROR_CANNOT_ACCEPT_TRANSACTED_WORK
The transactional resource manager cannot currently accept transacted work due to a transient condition, such as low resources.
0x00001AC0 – ERROR_CANNOT_ABORT_TRANSACTIONS
The transactional resource manager had too many transactions outstanding that could not be aborted. The transactional resource manager has been shut down.
0x00001B59 – ERROR_CTX_WINSTATION_NAME_INVALID
The specified session name is invalid.
0x00001B5A – ERROR_CTX_INVALID_PD
The specified protocol driver is invalid.
0x00001B5B – ERROR_CTX_PD_NOT_FOUND
The specified protocol driver was not found in the system path.
0x00001B5C – ERROR_CTX_WD_NOT_FOUND
The specified terminal connection driver was not found in the system path.
0x00001B5D – ERROR_CTX_CANNOT_MAKE_EVENTLOG_ENTRY
A registry key for event logging could not be created for this session.
0x00001B5E – ERROR_CTX_SERVICE_NAME_COLLISION
A service with the same name already exists on the system.
0x00001B5F – ERROR_CTX_CLOSE_PENDING
A close operation is pending on the session.
0x00001B60 – ERROR_CTX_NO_OUTBUF
There are no free output buffers available.
0x00001B61 – ERROR_CTX_MODEM_INF_NOT_FOUND
The MODEM.INF file was not found.
0x00001B62 – ERROR_CTX_INVALID_MODEMNAME
The modem name was not found in the MODEM.INF file.
0x00001B63 – ERROR_CTX_MODEM_RESPONSE_ERROR
The modem did not accept the command sent to it. Verify that the configured modem name matches the attached modem.
0x00001B64 – ERROR_CTX_MODEM_RESPONSE_TIMEOUT
The modem did not respond to the command sent to it. Verify that the modem is properly cabled and turned on.
0x00001B65 – ERROR_CTX_MODEM_RESPONSE_NO_CARRIER
Carrier detect has failed or carrier has been dropped due to disconnect.
0x00001B66 – ERROR_CTX_MODEM_RESPONSE_NO_DIALTONE
Dial tone not detected within the required time. Verify that the phone cable is properly attached and functional.
0x00001B67 – ERROR_CTX_MODEM_RESPONSE_BUSY
Busy signal detected at remote site on callback.
0x00001B68 – ERROR_CTX_MODEM_RESPONSE_VOICE
Voice detected at remote site on callback.
0x00001B69 – ERROR_CTX_TD_ERROR
Transport driver error.
0x00001B6E – ERROR_CTX_WINSTATION_NOT_FOUND
The specified session cannot be found.
0x00001B6F – ERROR_CTX_WINSTATION_ALREADY_EXISTS
The specified session name is already in use.
0x00001B70 – ERROR_CTX_WINSTATION_BUSY
The requested operation cannot be completed because the terminal connection is currently busy processing a connect, disconnect, reset, or delete operation.
0x00001B71 – ERROR_CTX_BAD_VIDEO_MODE
An attempt has been made to connect to a session whose video mode is not supported by the current client.
0x00001B7B – ERROR_CTX_GRAPHICS_INVALID
The application attempted to enable DOS graphics mode. DOS graphics mode is not supported.
0x00001B7D – ERROR_CTX_LOGON_DISABLED
Your interactive logon privilege has been disabled. Contact your administrator.
0x00001B7E – ERROR_CTX_NOT_CONSOLE
The requested operation can be performed only on the system console. This is most often the result of a driver or system DLL requiring direct console access.
0x00001B80 – ERROR_CTX_CLIENT_QUERY_TIMEOUT
The client failed to respond to the server connect message.
0x00001B81 – ERROR_CTX_CONSOLE_DISCONNECT
Disconnecting the console session is not supported.
0x00001B82 – ERROR_CTX_CONSOLE_CONNECT
Reconnecting a disconnected session to the console is not supported.
0x00001B84 – ERROR_CTX_SHADOW_DENIED
The request to control another session remotely was denied.
0x00001B85 – ERROR_CTX_WINSTATION_ACCESS_DENIED
The requested session access is denied.
0x00001B89 – ERROR_CTX_INVALID_WD
The specified terminal connection driver is invalid.
0x00001B8A – ERROR_CTX_SHADOW_INVALID
The requested session cannot be controlled remotely. This might be because the session is disconnected or does not currently have a user logged on.
0x00001B8B – ERROR_CTX_SHADOW_DISABLED
The requested session is not configured to allow remote control.
0x00001B8C – ERROR_CTX_CLIENT_LICENSE_IN_USE
Your request to connect to this terminal server has been rejected. Your terminal server client license number is currently being used by another user. Call your system administrator to obtain a unique license number.
0x00001B8D – ERROR_CTX_CLIENT_LICENSE_NOT_SET
Your request to connect to this terminal server has been rejected. Your terminal server client license number has not been entered for this copy of the terminal server client. Contact your system administrator.
0x00001B8E – ERROR_CTX_LICENSE_NOT_AVAILABLE
The number of connections to this computer is limited and all connections are in use right now. Try connecting later or contact your system administrator.
0x00001B8F – ERROR_CTX_LICENSE_CLIENT_INVALID
The client you are using is not licensed to use this system. Your logon request is denied.
0x00001B90 – ERROR_CTX_LICENSE_EXPIRED
The system license has expired. Your logon request is denied.
0x00001B91 – ERROR_CTX_SHADOW_NOT_RUNNING
Remote control could not be terminated because the specified session is not currently being remotely controlled.
0x00001B92 – ERROR_CTX_SHADOW_ENDED_BY_MODE_CHANGE
The remote control of the console was terminated because the display mode was changed. Changing the display mode in a remote control session is not supported.
0x00001B93 – ERROR_ACTIVATION_COUNT_EXCEEDED
Activation has already been reset the maximum number of times for this installation. Your activation timer will not be cleared.
0x00001B94 – ERROR_CTX_WINSTATIONS_DISABLED
Remote logons are currently disabled.
0x00001B95 – ERROR_CTX_ENCRYPTION_LEVEL_REQUIRED
You do not have the proper encryption level to access this session.
0x00001B96 – ERROR_CTX_SESSION_IN_USE
The user %s\\%s is currently logged on to this computer. Only the current user or an administrator can log on to this computer.
0x00001B97 – ERROR_CTX_NO_FORCE_LOGOFF
The user %s\\%s is already logged on to the console of this computer. You do not have permission to log in at this time. To resolve this issue, contact %s\\%s and have them log off.
0x00001B98 – ERROR_CTX_ACCOUNT_RESTRICTION
Unable to log you on because of an account restriction.
0x00001B99 – ERROR_RDP_PROTOCOL_ERROR
The RDP component %2 detected an error in the protocol stream and has disconnected the client.
0x00001B9A – ERROR_CTX_CDM_CONNECT
The Client Drive Mapping Service has connected on terminal connection.
0x00001B9B – ERROR_CTX_CDM_DISCONNECT
The Client Drive Mapping Service has disconnected on terminal connection.
0x00001B9C – ERROR_CTX_SECURITY_LAYER_ERROR
The terminal server security layer detected an error in the protocol stream and has disconnected the client.
0x00001B9D – ERROR_TS_INCOMPATIBLE_SESSIONS
The target session is incompatible with the current session.
0x00001F41 – FRS_ERR_INVALID_API_SEQUENCE
The file replication service API was called incorrectly.
0x00001F42 – FRS_ERR_STARTING_SERVICE
The file replication service cannot be started.
0x00001F43 – FRS_ERR_STOPPING_SERVICE
The file replication service cannot be stopped.
0x00001F44 – FRS_ERR_INTERNAL_API
The file replication service API terminated the request. The event log might contain more information.
0x00001F45 – FRS_ERR_INTERNAL
The file replication service terminated the request. The event log might contain more information.
0x00001F46 – FRS_ERR_SERVICE_COMM
The file replication service cannot be contacted. The event log might contain more information.
0x00001F47 – FRS_ERR_INSUFFICIENT_PRIV
The file replication service cannot satisfy the request because the user has insufficient privileges. The event log might contain more information.
0x00001F48 – FRS_ERR_AUTHENTICATION
The file replication service cannot satisfy the request because authenticated RPC is not available. The event log might contain more information.
0x00001F49 – FRS_ERR_PARENT_INSUFFICIENT_PRIV
The file replication service cannot satisfy the request because the user has insufficient privileges on the domain controller. The event log might contain more information.
0x00001F4A – FRS_ERR_PARENT_AUTHENTICATION
The file replication service cannot satisfy the request because authenticated RPC is not available on the domain controller. The event log might contain more information.
0x00001F4B – FRS_ERR_CHILD_TO_PARENT_COMM
The file replication service cannot communicate with the file replication service on the domain controller. The event log might contain more information.
0x00001F4C – FRS_ERR_PARENT_TO_CHILD_COMM
The file replication service on the domain controller cannot communicate with the file replication service on this computer. The event log might contain more information.
0x00001F4D – FRS_ERR_SYSVOL_POPULATE
The file replication service cannot populate the system volume because of an internal error. The event log might contain more information.
0x00001F4E – FRS_ERR_SYSVOL_POPULATE_TIMEOUT
The file replication service cannot populate the system volume because of an internal time-out. The event log might contain more information.
0x00001F4F – FRS_ERR_SYSVOL_IS_BUSY
The file replication service cannot process the request. The system volume is busy with a previous request.
0x00001F50 – FRS_ERR_SYSVOL_DEMOTE
The file replication service cannot stop replicating the system volume because of an internal error. The event log might contain more information.
0x00001F51 – FRS_ERR_INVALID_SERVICE_PARAMETER
The file replication service detected an invalid parameter.
0x00002008 – ERROR_DS_NOT_INSTALLED
An error occurred while installing the directory service. For more information, see the event log.
0x00002009 – ERROR_DS_MEMBERSHIP_EVALUATED_LOCALLY
The directory service evaluated group memberships locally.
0x0000200A – ERROR_DS_NO_ATTRIBUTE_OR_VALUE
The specified directory service attribute or value does not exist.
0x0000200B – ERROR_DS_INVALID_ATTRIBUTE_SYNTAX
The attribute syntax specified to the directory service is invalid.
0x0000200C – ERROR_DS_ATTRIBUTE_TYPE_UNDEFINED
The attribute type specified to the directory service is not defined.
0x0000200D – ERROR_DS_ATTRIBUTE_OR_VALUE_EXISTS
The specified directory service attribute or value already exists.
0x0000200E – ERROR_DS_BUSY
The directory service is busy.
0x0000200F – ERROR_DS_UNAVAILABLE
The directory service is unavailable.
0x00002010 – ERROR_DS_NO_RIDS_ALLOCATED
The directory service was unable to allocate a relative identifier.
0x00002011 – ERROR_DS_NO_MORE_RIDS
The directory service has exhausted the pool of relative identifiers.
0x00002012 – ERROR_DS_INCORRECT_ROLE_OWNER
The requested operation could not be performed because the directory service is not the master for that type of operation.
0x00002013 – ERROR_DS_RIDMGR_INIT_ERROR
The directory service was unable to initialize the subsystem that allocates relative identifiers.
0x00002014 – ERROR_DS_OBJ_CLASS_VIOLATION
The requested operation did not satisfy one or more constraints associated with the class of the object.
0x00002015 – ERROR_DS_CANT_ON_NON_LEAF
The directory service can perform the requested operation only on a leaf object.
0x00002016 – ERROR_DS_CANT_ON_RDN
The directory service cannot perform the requested operation on the relative distinguished name (RDN) attribute of an object.
0x00002017 – ERROR_DS_CANT_MOD_OBJ_CLASS
The directory service detected an attempt to modify the object class of an object.
0x00002018 – ERROR_DS_CROSS_DOM_MOVE_ERROR
The requested cross-domain move operation could not be performed.
0x00002019 – ERROR_DS_GC_NOT_AVAILABLE
Unable to contact the global catalog (GC) server.
0x0000201A – ERROR_SHARED_POLICY
The policy object is shared and can only be modified at the root.
0x0000201B – ERROR_POLICY_OBJECT_NOT_FOUND
The policy object does not exist.
0x0000201C – ERROR_POLICY_ONLY_IN_DS
The requested policy information is only in the directory service.
0x0000201D – ERROR_PROMOTION_ACTIVE
A domain controller promotion is currently active.
0x0000201E – ERROR_NO_PROMOTION_ACTIVE
A domain controller promotion is not currently active.
0x00002020 – ERROR_DS_OPERATIONS_ERROR
An operations error occurred.
0x00002021 – ERROR_DS_PROTOCOL_ERROR
A protocol error occurred.
0x00002022 – ERROR_DS_TIMELIMIT_EXCEEDED
The time limit for this request was exceeded.
0x00002023 – ERROR_DS_SIZELIMIT_EXCEEDED
The size limit for this request was exceeded.
0x00002024 – ERROR_DS_ADMIN_LIMIT_EXCEEDED
The administrative limit for this request was exceeded.
0x00002025 – ERROR_DS_COMPARE_FALSE
The compare response was false.
0x00002026 – ERROR_DS_COMPARE_TRUE
The compare response was true.
0x00002027 – ERROR_DS_AUTH_METHOD_NOT_SUPPORTED
The requested authentication method is not supported by the server.
0x00002028 – ERROR_DS_STRONG_AUTH_REQUIRED
A more secure authentication method is required for this server.
0x00002029 – ERROR_DS_INAPPROPRIATE_AUTH
Inappropriate authentication.
0x0000202A – ERROR_DS_AUTH_UNKNOWN
The authentication mechanism is unknown.
0x0000202B – ERROR_DS_REFERRAL
A referral was returned from the server.
0x0000202C – ERROR_DS_UNAVAILABLE_CRIT_EXTENSION
The server does not support the requested critical extension.
0x0000202D – ERROR_DS_CONFIDENTIALITY_REQUIRED
This request requires a secure connection.
0x0000202E – ERROR_DS_INAPPROPRIATE_MATCHING
Inappropriate matching.
0x0000202F – ERROR_DS_CONSTRAINT_VIOLATION
A constraint violation occurred.
0x00002030 – ERROR_DS_NO_SUCH_OBJECT
There is no such object on the server.
0x00002031 – ERROR_DS_ALIAS_PROBLEM
There is an alias problem.
0x00002032 – ERROR_DS_INVALID_DN_SYNTAX
An invalid dn syntax has been specified.
0x00002033 – ERROR_DS_IS_LEAF
The object is a leaf object.
0x00002034 – ERROR_DS_ALIAS_DEREF_PROBLEM
There is an alias dereferencing problem.
0x00002035 – ERROR_DS_UNWILLING_TO_PERFORM
The server is unwilling to process the request.
0x00002036 – ERROR_DS_LOOP_DETECT
A loop has been detected.
0x00002037 – ERROR_DS_NAMING_VIOLATION
There is a naming violation.
0x00002038 – ERROR_DS_OBJECT_RESULTS_TOO_LARGE
The result set is too large.
0x00002039 – ERROR_DS_AFFECTS_MULTIPLE_DSAS
The operation affects multiple DSAs.
0x0000203A – ERROR_DS_SERVER_DOWN
The server is not operational.
0x0000203B – ERROR_DS_LOCAL_ERROR
A local error has occurred.
0x0000203C – ERROR_DS_ENCODING_ERROR
An encoding error has occurred.
0x0000203D – ERROR_DS_DECODING_ERROR
A decoding error has occurred.
0x0000203E – ERROR_DS_FILTER_UNKNOWN
The search filter cannot be recognized.
0x0000203F – ERROR_DS_PARAM_ERROR
One or more parameters are illegal.
0x00002040 – ERROR_DS_NOT_SUPPORTED
The specified method is not supported.
0x00002041 – ERROR_DS_NO_RESULTS_RETURNED
No results were returned.
0x00002042 – ERROR_DS_CONTROL_NOT_FOUND
The specified control is not supported by the server.
0x00002043 – ERROR_DS_CLIENT_LOOP
A referral loop was detected by the client.
0x00002044 – ERROR_DS_REFERRAL_LIMIT_EXCEEDED
The preset referral limit was exceeded.
0x00002045 – ERROR_DS_SORT_CONTROL_MISSING
The search requires a SORT control.
0x00002046 – ERROR_DS_OFFSET_RANGE_ERROR
The search results exceed the offset range specified.
0x0000206D – ERROR_DS_ROOT_MUST_BE_NC
The root object must be the head of a naming context. The root object cannot have an instantiated parent.
0x0000206E – ERROR_DS_ADD_REPLICA_INHIBITED
The add replica operation cannot be performed. The naming context must be writable to create the replica.
0x0000206F – ERROR_DS_ATT_NOT_DEF_IN_SCHEMA
A reference to an attribute that is not defined in the schema occurred.
0x00002070 – ERROR_DS_MAX_OBJ_SIZE_EXCEEDED
The maximum size of an object has been exceeded.
0x00002071 – ERROR_DS_OBJ_STRING_NAME_EXISTS
An attempt was made to add an object to the directory with a name that is already in use.
0x00002072 – ERROR_DS_NO_RDN_DEFINED_IN_SCHEMA
An attempt was made to add an object of a class that does not have an RDN defined in the schema.
0x00002073 – ERROR_DS_RDN_DOESNT_MATCH_SCHEMA
An attempt was made to add an object using an RDN that is not the RDN defined in the schema.
0x00002074 – ERROR_DS_NO_REQUESTED_ATTS_FOUND
None of the requested attributes were found on the objects.
0x00002075 – ERROR_DS_USER_BUFFER_TO_SMALL
The user buffer is too small.
0x00002076 – ERROR_DS_ATT_IS_NOT_ON_OBJ
The attribute specified in the operation is not present on the object.
0x00002077 – ERROR_DS_ILLEGAL_MOD_OPERATION
Illegal modify operation. Some aspect of the modification is not permitted.
0x00002078 – ERROR_DS_OBJ_TOO_LARGE
The specified object is too large.
0x00002079 – ERROR_DS_BAD_INSTANCE_TYPE
The specified instance type is not valid.
0x0000207A – ERROR_DS_MASTERDSA_REQUIRED
The operation must be performed at a master DSA.
0x0000207B – ERROR_DS_OBJECT_CLASS_REQUIRED
The object class attribute must be specified.
0x0000207C – ERROR_DS_MISSING_REQUIRED_ATT
A required attribute is missing.
0x0000207D – ERROR_DS_ATT_NOT_DEF_FOR_CLASS
An attempt was made to modify an object to include an attribute that is not legal for its class.
0x0000207E – ERROR_DS_ATT_ALREADY_EXISTS
The specified attribute is already present on the object.
0x00002080 – ERROR_DS_CANT_ADD_ATT_VALUES
The specified attribute is not present, or has no values.
0x00002081 – ERROR_DS_SINGLE_VALUE_CONSTRAINT
Multiple values were specified for an attribute that can have only one value.
0x00002082 – ERROR_DS_RANGE_CONSTRAINT
A value for the attribute was not in the acceptable range of values.
0x00002083 – ERROR_DS_ATT_VAL_ALREADY_EXISTS
The specified value already exists.
0x00002084 – ERROR_DS_CANT_REM_MISSING_ATT
The attribute cannot be removed because it is not present on the object.
0x00002085 – ERROR_DS_CANT_REM_MISSING_ATT_VAL
The attribute value cannot be removed because it is not present on the object.
0x00002086 – ERROR_DS_ROOT_CANT_BE_SUBREF
The specified root object cannot be a subreference.
0x00002087 – ERROR_DS_NO_CHAINING
Chaining is not permitted.
0x00002088 – ERROR_DS_NO_CHAINED_EVAL
Chained evaluation is not permitted.
0x00002089 – ERROR_DS_NO_PARENT_OBJECT
The operation could not be performed because the object's parent is either uninstantiated or deleted.
0x0000208A – ERROR_DS_PARENT_IS_AN_ALIAS
Having a parent that is an alias is not permitted. Aliases are leaf objects.
0x0000208B – ERROR_DS_CANT_MIX_MASTER_AND_REPS
The object and parent must be of the same type, either both masters or both replicas.
0x0000208C – ERROR_DS_CHILDREN_EXIST
The operation cannot be performed because child objects exist. This operation can only be performed on a leaf object.
0x0000208D – ERROR_DS_OBJ_NOT_FOUND
Directory object not found.
0x0000208E – ERROR_DS_ALIASED_OBJ_MISSING
The aliased object is missing.
0x0000208F – ERROR_DS_BAD_NAME_SYNTAX
The object name has bad syntax.
0x00002090 – ERROR_DS_ALIAS_POINTS_TO_ALIAS
An alias is not permitted to refer to another alias.
0x00002091 – ERROR_DS_CANT_DEREF_ALIAS
The alias cannot be dereferenced.
0x00002092 – ERROR_DS_OUT_OF_SCOPE
The operation is out of scope.
0x00002093 – ERROR_DS_OBJECT_BEING_REMOVED
The operation cannot continue because the object is in the process of being removed.
0x00002094 – ERROR_DS_CANT_DELETE_DSA_OBJ
The DSA object cannot be deleted.
0x00002095 – ERROR_DS_GENERIC_ERROR
A directory service error has occurred.
0x00002096 – ERROR_DS_DSA_MUST_BE_INT_MASTER
The operation can only be performed on an internal master DSA object.
0x00002097 – ERROR_DS_CLASS_NOT_DSA
The object must be of class DSA.
0x00002098 – ERROR_DS_INSUFF_ACCESS_RIGHTS
Insufficient access rights to perform the operation.
0x00002099 – ERROR_DS_ILLEGAL_SUPERIOR
The object cannot be added because the parent is not on the list of possible superiors.
0x0000209A – ERROR_DS_ATTRIBUTE_OWNED_BY_SAM
Access to the attribute is not permitted because the attribute is owned by the SAM.
0x0000209B – ERROR_DS_NAME_TOO_MANY_PARTS
The name has too many parts.
0x0000209C – ERROR_DS_NAME_TOO_LONG
The name is too long.
0x0000209D – ERROR_DS_NAME_VALUE_TOO_LONG
The name value is too long.
0x0000209E – ERROR_DS_NAME_UNPARSEABLE
The directory service encountered an error parsing a name.
0x0000209F – ERROR_DS_NAME_TYPE_UNKNOWN
The directory service cannot get the attribute type for a name.
0x000020A0 – ERROR_DS_NOT_AN_OBJECT
The name does not identify an object; the name identifies a phantom.
0x000020A1 – ERROR_DS_SEC_DESC_TOO_SHORT
The security descriptor is too short.
0x000020A2 – ERROR_DS_SEC_DESC_INVALID
The security descriptor is invalid.
0x000020A3 – ERROR_DS_NO_DELETED_NAME
Failed to create name for deleted object.
0x000020A4 – ERROR_DS_SUBREF_MUST_HAVE_PARENT
The parent of a new subreference must exist.
0x000020A5 – ERROR_DS_NCNAME_MUST_BE_NC
The object must be a naming context.
0x000020A6 – ERROR_DS_CANT_ADD_SYSTEM_ONLY
It is not permitted to add an attribute that is owned by the system.
0x000020A7 – ERROR_DS_CLASS_MUST_BE_CONCRETE
The class of the object must be structural; you cannot instantiate an abstract class.
0x000020A8 – ERROR_DS_INVALID_DMD
The schema object could not be found.
0x000020A9 – ERROR_DS_OBJ_GUID_EXISTS
A local object with this GUID (dead or alive) already exists.
0x000020AA – ERROR_DS_NOT_ON_BACKLINK
The operation cannot be performed on a back link.
0x000020AB – ERROR_DS_NO_CROSSREF_FOR_NC
The cross-reference for the specified naming context could not be found.
0x000020AC – ERROR_DS_SHUTTING_DOWN
The operation could not be performed because the directory service is shutting down.
0x000020AD – ERROR_DS_UNKNOWN_OPERATION
The directory service request is invalid.
0x000020AE – ERROR_DS_INVALID_ROLE_OWNER
The role owner attribute could not be read.
0x000020AF – ERROR_DS_COULDNT_CONTACT_FSMO
The requested Flexible Single Master Operations (FSMO) operation failed. The current FSMO holder could not be contacted.
0x000020B0 – ERROR_DS_CROSS_NC_DN_RENAME
Modification of a distinguished name across a naming context is not permitted.
0x000020B1 – ERROR_DS_CANT_MOD_SYSTEM_ONLY
The attribute cannot be modified because it is owned by the system.
0x000020B2 – ERROR_DS_REPLICATOR_ONLY
Only the replicator can perform this function.
0x000020B3 – ERROR_DS_OBJ_CLASS_NOT_DEFINED
The specified class is not defined.
0x000020B4 – ERROR_DS_OBJ_CLASS_NOT_SUBCLASS
The specified class is not a subclass.
0x000020B5 – ERROR_DS_NAME_REFERENCE_INVALID
The name reference is invalid.
0x000020B6 – ERROR_DS_CROSS_REF_EXISTS
A cross-reference already exists.
0x000020B7 – ERROR_DS_CANT_DEL_MASTER_CROSSREF
It is not permitted to delete a master cross-reference.
0x000020B8 – ERROR_DS_SUBTREE_NOTIFY_NOT_NC_HEAD
Subtree notifications are only supported on naming context (NC) heads.
0x000020B9 – ERROR_DS_NOTIFY_FILTER_TOO_COMPLEX
Notification filter is too complex.
0x000020BA – ERROR_DS_DUP_RDN
Schema update failed: Duplicate RDN.
0x000020BB – ERROR_DS_DUP_OID
Schema update failed: Duplicate OID.
0x000020BC – ERROR_DS_DUP_MAPI_ID
Schema update failed: Duplicate Message Application Programming Interface (MAPI) identifier.
0x000020BD – ERROR_DS_DUP_SCHEMA_ID_GUID
Schema update failed: Duplicate schema ID GUID.
0x000020BE – ERROR_DS_DUP_LDAP_DISPLAY_NAME
Schema update failed: Duplicate LDAP display name.
0x000020BF – ERROR_DS_SEMANTIC_ATT_TEST
Schema update failed: Range-Lower less than Range-Upper.
0x000020C0 – ERROR_DS_SYNTAX_MISMATCH
Schema update failed: Syntax mismatch.
0x000020C1 – ERROR_DS_EXISTS_IN_MUST_HAVE
Schema deletion failed: Attribute is used in the Must-Contain list.
0x000020C2 – ERROR_DS_EXISTS_IN_MAY_HAVE
Schema deletion failed: Attribute is used in the May-Contain list.
0x000020C3 – ERROR_DS_NONEXISTENT_MAY_HAVE
Schema update failed: Attribute in May-Contain list does not exist.
0x000020C4 – ERROR_DS_NONEXISTENT_MUST_HAVE
Schema update failed: Attribute in the Must-Contain list does not exist.
0x000020C5 – ERROR_DS_AUX_CLS_TEST_FAIL
Schema update failed: Class in the Aux Class list does not exist or is not an auxiliary class.
0x000020C6 – ERROR_DS_NONEXISTENT_POSS_SUP
Schema update failed: Class in the Poss-Superiors list does not exist.
0x000020C7 – ERROR_DS_SUB_CLS_TEST_FAIL
Schema update failed: Class in the subclass of the list does not exist or does not satisfy hierarchy rules.
0x000020C8 – ERROR_DS_BAD_RDN_ATT_ID_SYNTAX
Schema update failed: Rdn-Att-Id has wrong syntax.
0x000020C9 – ERROR_DS_EXISTS_IN_AUX_CLS
Schema deletion failed: Class is used as an auxiliary class.
0x000020CA – ERROR_DS_EXISTS_IN_SUB_CLS
Schema deletion failed: Class is used as a subclass.
0x000020CB – ERROR_DS_EXISTS_IN_POSS_SUP
Schema deletion failed: Class is used as a Poss-Superior.
0x000020CC – ERROR_DS_RECALCSCHEMA_FAILED
Schema update failed in recalculating validation cache.
0x000020CD – ERROR_DS_TREE_DELETE_NOT_FINISHED
The tree deletion is not finished. The request must be made again to continue deleting the tree.
0x000020CE – ERROR_DS_CANT_DELETE
The requested delete operation could not be performed.
0x000020CF – ERROR_DS_ATT_SCHEMA_REQ_ID
Cannot read the governs class identifier for the schema record.
0x000020D0 – ERROR_DS_BAD_ATT_SCHEMA_SYNTAX
The attribute schema has bad syntax.
0x000020D1 – ERROR_DS_CANT_CACHE_ATT
The attribute could not be cached.
0x000020D2 – ERROR_DS_CANT_CACHE_CLASS
The class could not be cached.
0x000020D3 – ERROR_DS_CANT_REMOVE_ATT_CACHE
The attribute could not be removed from the cache.
0x000020D4 – ERROR_DS_CANT_REMOVE_CLASS_CACHE
The class could not be removed from the cache.
0x000020D5 – ERROR_DS_CANT_RETRIEVE_DN
The distinguished name attribute could not be read.
0x000020D6 – ERROR_DS_MISSING_SUPREF
No superior reference has been configured for the directory service. The directory service is, therefore, unable to issue referrals to objects outside this forest.
0x000020D7 – ERROR_DS_CANT_RETRIEVE_INSTANCE
The instance type attribute could not be retrieved.
0x000020D8 – ERROR_DS_CODE_INCONSISTENCY
An internal error has occurred.
0x000020D9 – ERROR_DS_DATABASE_ERROR
A database error has occurred.
0x000020DA – ERROR_DS_GOVERNSID_MISSING
The governsID attribute is missing.
0x000020DB – ERROR_DS_MISSING_EXPECTED_ATT
An expected attribute is missing.
0x000020DC – ERROR_DS_NCNAME_MISSING_CR_REF
The specified naming context is missing a cross-reference.
0x000020DD – ERROR_DS_SECURITY_CHECKING_ERROR
A security checking error has occurred.
0x000020DE – ERROR_DS_SCHEMA_NOT_LOADED
The schema is not loaded.
0x000020DF – ERROR_DS_SCHEMA_ALLOC_FAILED
Schema allocation failed. Check if the machine is running low on memory.
0x000020E0 – ERROR_DS_ATT_SCHEMA_REQ_SYNTAX
Failed to obtain the required syntax for the attribute schema.
0x000020E1 – ERROR_DS_GCVERIFY_ERROR
The GC verification failed. The GC is not available or does not support the operation. Some part of the directory is currently not available.
0x000020E2 – ERROR_DS_DRA_SCHEMA_MISMATCH
The replication operation failed because of a schema mismatch between the servers involved.
0x000020E3 – ERROR_DS_CANT_FIND_DSA_OBJ
The DSA object could not be found.
0x000020E4 – ERROR_DS_CANT_FIND_EXPECTED_NC
The naming context could not be found.
0x000020E5 – ERROR_DS_CANT_FIND_NC_IN_CACHE
The naming context could not be found in the cache.
0x000020E6 – ERROR_DS_CANT_RETRIEVE_CHILD
The child object could not be retrieved.
0x000020E7 – ERROR_DS_SECURITY_ILLEGAL_MODIFY
The modification was not permitted for security reasons.
0x000020E8 – ERROR_DS_CANT_REPLACE_HIDDEN_REC
The operation cannot replace the hidden record.
0x000020E9 – ERROR_DS_BAD_HIERARCHY_FILE
The hierarchy file is invalid.
0x000020EA – ERROR_DS_BUILD_HIERARCHY_TABLE_FAILED
The attempt to build the hierarchy table failed.
0x000020EB – ERROR_DS_CONFIG_PARAM_MISSING
The directory configuration parameter is missing from the registry.
0x000020EC – ERROR_DS_COUNTING_AB_INDICES_FAILED
The attempt to count the address book indices failed.
0x000020ED – ERROR_DS_HIERARCHY_TABLE_MALLOC_FAILED
The allocation of the hierarchy table failed.
0x000020EE – ERROR_DS_INTERNAL_FAILURE
The directory service encountered an internal failure.
0x000020EF – ERROR_DS_UNKNOWN_ERROR
The directory service encountered an unknown failure.
0x000020F0 – ERROR_DS_ROOT_REQUIRES_CLASS_TOP
A root object requires a class of "top".
0x000020F1 – ERROR_DS_REFUSING_FSMO_ROLES
This directory server is shutting down, and cannot take ownership of new floating single-master operation roles.
0x000020F2 – ERROR_DS_MISSING_FSMO_SETTINGS
The directory service is missing mandatory configuration information and is unable to determine the ownership of floating single-master operation roles.
0x000020F3 – ERROR_DS_UNABLE_TO_SURRENDER_ROLES
The directory service was unable to transfer ownership of one or more floating single-master operation roles to other servers.
0x000020F4 – ERROR_DS_DRA_GENERIC
The replication operation failed.
0x000020F5 – ERROR_DS_DRA_INVALID_PARAMETER
An invalid parameter was specified for this replication operation.
0x000020F6 – ERROR_DS_DRA_BUSY
The directory service is too busy to complete the replication operation at this time.
0x000020F7 – ERROR_DS_DRA_BAD_DN
The DN specified for this replication operation is invalid.
0x000020F8 – ERROR_DS_DRA_BAD_NC
The naming context specified for this replication operation is invalid.
0x000020F9 – ERROR_DS_DRA_DN_EXISTS
The DN specified for this replication operation already exists.
0x000020FA – ERROR_DS_DRA_INTERNAL_ERROR
The replication system encountered an internal error.
0x000020FB – ERROR_DS_DRA_INCONSISTENT_DIT
The replication operation encountered a database inconsistency.
0x000020FC – ERROR_DS_DRA_CONNECTION_FAILED
The server specified for this replication operation could not be contacted.
0x000020FD – ERROR_DS_DRA_BAD_INSTANCE_TYPE
The replication operation encountered an object with an invalid instance type.
0x000020FE – ERROR_DS_DRA_OUT_OF_MEM
The replication operation failed to allocate memory.
0x000020FF – ERROR_DS_DRA_MAIL_PROBLEM
The replication operation encountered an error with the mail system.
0x00002100 – ERROR_DS_DRA_REF_ALREADY_EXISTS
The replication reference information for the target server already exists.
0x00002101 – ERROR_DS_DRA_REF_NOT_FOUND
The replication reference information for the target server does not exist.
0x00002102 – ERROR_DS_DRA_OBJ_IS_REP_SOURCE
The naming context cannot be removed because it is replicated to another server.
0x00002103 – ERROR_DS_DRA_DB_ERROR
The replication operation encountered a database error.
0x00002104 – ERROR_DS_DRA_NO_REPLICA
The naming context is in the process of being removed or is not replicated from the specified server.
0x00002105 – ERROR_DS_DRA_ACCESS_DENIED
Replication access was denied.
0x00002106 – ERROR_DS_DRA_NOT_SUPPORTED
The requested operation is not supported by this version of the directory service.
0x00002107 – ERROR_DS_DRA_RPC_CANCELLED
The replication RPC was canceled.
0x00002108 – ERROR_DS_DRA_SOURCE_DISABLED
The source server is currently rejecting replication requests.
0x00002109 – ERROR_DS_DRA_SINK_DISABLED
The destination server is currently rejecting replication requests.
0x0000210A – ERROR_DS_DRA_NAME_COLLISION
The replication operation failed due to a collision of object names.
0x0000210B – ERROR_DS_DRA_SOURCE_REINSTALLED
The replication source has been reinstalled.
0x0000210C – ERROR_DS_DRA_MISSING_PARENT
The replication operation failed because a required parent object is missing.
0x0000210D – ERROR_DS_DRA_PREEMPTED
The replication operation was preempted.
0x0000210E – ERROR_DS_DRA_ABANDON_SYNC
The replication synchronization attempt was abandoned because of a lack of updates.
0x0000210F – ERROR_DS_DRA_SHUTDOWN
The replication operation was terminated because the system is shutting down.
0x00002110 – ERROR_DS_DRA_INCOMPATIBLE_PARTIAL_SET
A synchronization attempt failed because the destination DC is currently waiting to synchronize new partial attributes from the source. This condition is normal if a recent schema change modified the partial attribute set. The destination partial attribute set is not a subset of the source partial attribute set.
0x00002111 – ERROR_DS_DRA_SOURCE_IS_PARTIAL_REPLICA
The replication synchronization attempt failed because a master replica attempted to sync from a partial replica.
0x00002112 – ERROR_DS_DRA_EXTN_CONNECTION_FAILED
The server specified for this replication operation was contacted, but that server was unable to contact an additional server needed to complete the operation.
0x00002113 – ERROR_DS_INSTALL_SCHEMA_MISMATCH
The version of the directory service schema of the source forest is not compatible with the version of the directory service on this computer.
0x00002114 – ERROR_DS_DUP_LINK_ID
Schema update failed: An attribute with the same link identifier already exists.
0x00002115 – ERROR_DS_NAME_ERROR_RESOLVING
Name translation: Generic processing error.
0x00002116 – ERROR_DS_NAME_ERROR_NOT_FOUND
Name translation: Could not find the name or insufficient right to see name.
0x00002117 – ERROR_DS_NAME_ERROR_NOT_UNIQUE
Name translation: Input name mapped to more than one output name.
0x00002118 – ERROR_DS_NAME_ERROR_NO_MAPPING
Name translation: The input name was found but not the associated output format.
0x00002119 – ERROR_DS_NAME_ERROR_DOMAIN_ONLY
Name translation: Unable to resolve completely, only the domain was found.
0x0000211A – ERROR_DS_NAME_ERROR_NO_SYNTACTICAL_MAPPING
Name translation: Unable to perform purely syntactical mapping at the client without going out to the wire.
0x0000211B – ERROR_DS_CONSTRUCTED_ATT_MOD
Modification of a constructed attribute is not allowed.
0x0000211C – ERROR_DS_WRONG_OM_OBJ_CLASS
The OM-Object-Class specified is incorrect for an attribute with the specified syntax.
0x0000211D – ERROR_DS_DRA_REPL_PENDING
The replication request has been posted; waiting for a reply.
0x0000211E – ERROR_DS_DS_REQUIRED
The requested operation requires a directory service, and none was available.
0x0000211F – ERROR_DS_INVALID_LDAP_DISPLAY_NAME
The LDAP display name of the class or attribute contains non-ASCII characters.
0x00002120 – ERROR_DS_NON_BASE_SEARCH
The requested search operation is only supported for base searches.
0x00002121 – ERROR_DS_CANT_RETRIEVE_ATTS
The search failed to retrieve attributes from the database.
0x00002122 – ERROR_DS_BACKLINK_WITHOUT_LINK
The schema update operation tried to add a backward link attribute that has no corresponding forward link.
0x00002123 – ERROR_DS_EPOCH_MISMATCH
The source and destination of a cross-domain move do not agree on the object's epoch number. Either the source or the destination does not have the latest version of the object.
0x00002124 – ERROR_DS_SRC_NAME_MISMATCH
The source and destination of a cross-domain move do not agree on the object's current name. Either the source or the destination does not have the latest version of the object.
0x00002125 – ERROR_DS_SRC_AND_DST_NC_IDENTICAL
The source and destination for the cross-domain move operation are identical. The caller should use a local move operation instead of a cross-domain move operation.
0x00002126 – ERROR_DS_DST_NC_MISMATCH
The source and destination for a cross-domain move do not agree on the naming contexts in the forest. Either the source or the destination does not have the latest version of the Partitions container.
0x00002127 – ERROR_DS_NOT_AUTHORITIVE_FOR_DST_NC
The destination of a cross-domain move is not authoritative for the destination naming context.
0x00002128 – ERROR_DS_SRC_GUID_MISMATCH
The source and destination of a cross-domain move do not agree on the identity of the source object. Either the source or the destination does not have the latest version of the source object.
0x00002129 – ERROR_DS_CANT_MOVE_DELETED_OBJECT
The object being moved across domains is already known to be deleted by the destination server. The source server does not have the latest version of the source object.
0x0000212A – ERROR_DS_PDC_OPERATION_IN_PROGRESS
Another operation that requires exclusive access to the PDC FSMO is already in progress.
0x0000212B – ERROR_DS_CROSS_DOMAIN_CLEANUP_REQD
A cross-domain move operation failed because two versions of the moved object exist—one each in the source and destination domains. The destination object needs to be removed to restore the system to a consistent state.
0x0000212C – ERROR_DS_ILLEGAL_XDOM_MOVE_OPERATION
This object cannot be moved across domain boundaries either because cross-domain moves for this class are not allowed, or the object has some special characteristics, for example, a trust account or a restricted relative identifier (RID), that prevent its move.
0x0000212D – ERROR_DS_CANT_WITH_ACCT_GROUP_MEMBERSHPS
Cannot move objects with memberships across domain boundaries because, once moved, this violates the membership conditions of the account group. Remove the object from any account group memberships and retry.
0x0000212E – ERROR_DS_NC_MUST_HAVE_NC_PARENT
A naming context head must be the immediate child of another naming context head, not of an interior node.
0x0000212F – ERROR_DS_CR_IMPOSSIBLE_TO_VALIDATE
The directory cannot validate the proposed naming context name because it does not hold a replica of the naming context above the proposed naming context. Ensure that the domain naming master role is held by a server that is configured as a GC server, and that the server is up-to-date with its replication partners. (Applies only to Windows 2000 operating system domain naming masters.)
0x00002130 – ERROR_DS_DST_DOMAIN_NOT_NATIVE
Destination domain must be in native mode.
0x00002131 – ERROR_DS_MISSING_INFRASTRUCTURE_CONTAINER
The operation cannot be performed because the server does not have an infrastructure container in the domain of interest.
0x00002132 – ERROR_DS_CANT_MOVE_ACCOUNT_GROUP
Cross-domain moves of nonempty account groups is not allowed.
0x00002133 – ERROR_DS_CANT_MOVE_RESOURCE_GROUP
Cross-domain moves of nonempty resource groups is not allowed.
0x00002134 – ERROR_DS_INVALID_SEARCH_FLAG
The search flags for the attribute are invalid. The ambiguous name resolution (ANR) bit is valid only on attributes of Unicode or Teletex strings.
0x00002135 – ERROR_DS_NO_TREE_DELETE_ABOVE_NC
Tree deletions starting at an object that has an NC head as a descendant are not allowed.
0x00002136 – ERROR_DS_COULDNT_LOCK_TREE_FOR_DELETE
The directory service failed to lock a tree in preparation for a tree deletion because the tree was in use.
0x00002137 – ERROR_DS_COULDNT_IDENTIFY_OBJECTS_FOR_TREE_DELETE
The directory service failed to identify the list of objects to delete while attempting a tree deletion.
0x00002138 – ERROR_DS_SAM_INIT_FAILURE
SAM initialization failed because of the following error: %1. Error Status: 0x%2. Click OK to shut down the system and reboot into Directory Services Restore Mode. Check the event log for detailed information.
0x00002139 – ERROR_DS_SENSITIVE_GROUP_VIOLATION
Only an administrator can modify the membership list of an administrative group.
0x0000213A – ERROR_DS_CANT_MOD_PRIMARYGROUPID
Cannot change the primary group ID of a domain controller account.
0x0000213B – ERROR_DS_ILLEGAL_BASE_SCHEMA_MOD
An attempt was made to modify the base schema.
0x0000213C – ERROR_DS_NONSAFE_SCHEMA_CHANGE
Adding a new mandatory attribute to an existing class, deleting a mandatory attribute from an existing class, or adding an optional attribute to the special class Top that is not a backlink attribute (directly or through inheritance, for example, by adding or deleting an auxiliary class) is not allowed.
0x0000213D – ERROR_DS_SCHEMA_UPDATE_DISALLOWED
Schema update is not allowed on this DC because the DC is not the schema FSMO role owner.
0x0000213E – ERROR_DS_CANT_CREATE_UNDER_SCHEMA
An object of this class cannot be created under the schema container. You can only create Attribute-Schema and Class-Schema objects under the schema container.
0x0000213F – ERROR_DS_INSTALL_NO_SRC_SCH_VERSION
The replica or child install failed to get the objectVersion attribute on the schema container on the source DC. Either the attribute is missing on the schema container or the credentials supplied do not have permission to read it.
0x00002140 – ERROR_DS_INSTALL_NO_SCH_VERSION_IN_INIFILE
The replica or child install failed to read the objectVersion attribute in the SCHEMA section of the file schema.ini in the System32 directory.
0x00002141 – ERROR_DS_INVALID_GROUP_TYPE
The specified group type is invalid.
0x00002142 – ERROR_DS_NO_NEST_GLOBALGROUP_IN_MIXEDDOMAIN
You cannot nest global groups in a mixed domain if the group is security-enabled.
0x00002143 – ERROR_DS_NO_NEST_LOCALGROUP_IN_MIXEDDOMAIN
You cannot nest local groups in a mixed domain if the group is security-enabled.
0x00002144 – ERROR_DS_GLOBAL_CANT_HAVE_LOCAL_MEMBER
A global group cannot have a local group as a member.
0x00002145 – ERROR_DS_GLOBAL_CANT_HAVE_UNIVERSAL_MEMBER
A global group cannot have a universal group as a member.
0x00002146 – ERROR_DS_UNIVERSAL_CANT_HAVE_LOCAL_MEMBER
A universal group cannot have a local group as a member.
0x00002147 – ERROR_DS_GLOBAL_CANT_HAVE_CROSSDOMAIN_MEMBER
A global group cannot have a cross-domain member.
0x00002148 – ERROR_DS_LOCAL_CANT_HAVE_CROSSDOMAIN_LOCAL_MEMBER
A local group cannot have another cross domain local group as a member.
0x00002149 – ERROR_DS_HAVE_PRIMARY_MEMBERS
A group with primary members cannot change to a security-disabled group.
0x0000214A – ERROR_DS_STRING_SD_CONVERSION_FAILED
The schema cache load failed to convert the string default security descriptor (SD) on a class-schema object.
0x0000214B – ERROR_DS_NAMING_MASTER_GC
Only DSAs configured to be GC servers should be allowed to hold the domain naming master FSMO role. (Applies only to Windows 2000 servers.)
0x0000214C – ERROR_DS_DNS_LOOKUP_FAILURE
The DSA operation is unable to proceed because of a DNS lookup failure.
0x0000214D – ERROR_DS_COULDNT_UPDATE_SPNS
While processing a change to the DNS host name for an object, the SPN values could not be kept in sync.
0x0000214E – ERROR_DS_CANT_RETRIEVE_SD
The Security Descriptor attribute could not be read.
0x0000214F – ERROR_DS_KEY_NOT_UNIQUE
The object requested was not found, but an object with that key was found.
0x00002150 – ERROR_DS_WRONG_LINKED_ATT_SYNTAX
The syntax of the linked attribute being added is incorrect. Forward links can only have syntax 2.5.5.1, 2.5.5.7, and 2.5.5.14, and backlinks can only have syntax 2.5.5.1.
0x00002151 – ERROR_DS_SAM_NEED_BOOTKEY_PASSWORD
SAM needs to get the boot password.
0x00002152 – ERROR_DS_SAM_NEED_BOOTKEY_FLOPPY
SAM needs to get the boot key from the floppy disk.
0x00002153 – ERROR_DS_CANT_START
Directory Service cannot start.
0x00002154 – ERROR_DS_INIT_FAILURE
Directory Services could not start.
0x00002155 – ERROR_DS_NO_PKT_PRIVACY_ON_CONNECTION
The connection between client and server requires packet privacy or better.
0x00002156 – ERROR_DS_SOURCE_DOMAIN_IN_FOREST
The source domain cannot be in the same forest as the destination.
0x00002157 – ERROR_DS_DESTINATION_DOMAIN_NOT_IN_FOREST
The destination domain MUST be in the forest.
0x00002158 – ERROR_DS_DESTINATION_AUDITING_NOT_ENABLED
The operation requires that destination domain auditing be enabled.
0x00002159 – ERROR_DS_CANT_FIND_DC_FOR_SRC_DOMAIN
The operation could not locate a DC for the source domain.
0x0000215A – ERROR_DS_SRC_OBJ_NOT_GROUP_OR_USER
The source object must be a group or user.
0x0000215B – ERROR_DS_SRC_SID_EXISTS_IN_FOREST
The source object's SID already exists in the destination forest.
0x0000215C – ERROR_DS_SRC_AND_DST_OBJECT_CLASS_MISMATCH
The source and destination object must be of the same type.
0x0000215D – ERROR_SAM_INIT_FAILURE
SAM initialization failed because of the following error: %1. Error Status: 0x%2. Click OK to shut down the system and reboot into Safe Mode. Check the event log for detailed information.
0x0000215E – ERROR_DS_DRA_SCHEMA_INFO_SHIP
Schema information could not be included in the replication request.
0x0000215F – ERROR_DS_DRA_SCHEMA_CONFLICT
The replication operation could not be completed due to a schema incompatibility.
0x00002160 – ERROR_DS_DRA_EARLIER_SCHEMA_CONFLICT
The replication operation could not be completed due to a previous schema incompatibility.
0x00002161 – ERROR_DS_DRA_OBJ_NC_MISMATCH
The replication update could not be applied because either the source or the destination has not yet received information regarding a recent cross-domain move operation.
0x00002162 – ERROR_DS_NC_STILL_HAS_DSAS
The requested domain could not be deleted because there exist domain controllers that still host this domain.
0x00002163 – ERROR_DS_GC_REQUIRED
The requested operation can be performed only on a GC server.
0x00002164 – ERROR_DS_LOCAL_MEMBER_OF_LOCAL_ONLY
A local group can only be a member of other local groups in the same domain.
0x00002165 – ERROR_DS_NO_FPO_IN_UNIVERSAL_GROUPS
Foreign security principals cannot be members of universal groups.
0x00002166 – ERROR_DS_CANT_ADD_TO_GC
The attribute is not allowed to be replicated to the GC because of security reasons.
0x00002167 – ERROR_DS_NO_CHECKPOINT_WITH_PDC
The checkpoint with the PDC could not be taken because too many modifications are currently being processed.
0x00002168 – ERROR_DS_SOURCE_AUDITING_NOT_ENABLED
The operation requires that source domain auditing be enabled.
0x00002169 – ERROR_DS_CANT_CREATE_IN_NONDOMAIN_NC
Security principal objects can only be created inside domain naming contexts.
0x0000216A – ERROR_DS_INVALID_NAME_FOR_SPN
An SPN could not be constructed because the provided host name is not in the necessary format.
0x0000216B – ERROR_DS_FILTER_USES_CONTRUCTED_ATTRS
A filter was passed that uses constructed attributes.
0x0000216C – ERROR_DS_UNICODEPWD_NOT_IN_QUOTES
The unicodePwd attribute value must be enclosed in quotation marks.
0x0000216D – ERROR_DS_MACHINE_ACCOUNT_QUOTA_EXCEEDED
Your computer could not be joined to the domain. You have exceeded the maximum number of computer accounts you are allowed to create in this domain. Contact your system administrator to have this limit reset or increased.
0x0000216E – ERROR_DS_MUST_BE_RUN_ON_DST_DC
For security reasons, the operation must be run on the destination DC.
0x0000216F – ERROR_DS_SRC_DC_MUST_BE_SP4_OR_GREATER
For security reasons, the source DC must be NT4SP4 or greater.
0x00002170 – ERROR_DS_CANT_TREE_DELETE_CRITICAL_OBJ
Critical directory service system objects cannot be deleted during tree deletion operations. The tree deletion might have been partially performed.
0x00002171 – ERROR_DS_INIT_FAILURE_CONSOLE
Directory Services could not start because of the following error: %1. Error Status: 0x%2. Click OK to shut down the system. You can use the Recovery Console to further diagnose the system.
0x00002172 – ERROR_DS_SAM_INIT_FAILURE_CONSOLE
SAM initialization failed because of the following error: %1. Error Status: 0x%2. Click OK to shut down the system. You can use the Recovery Console to further diagnose the system.
0x00002173 – ERROR_DS_FOREST_VERSION_TOO_HIGH
The version of the operating system installed is incompatible with the current forest functional level. You must upgrade to a new version of the operating system before this server can become a domain controller in this forest.
0x00002174 – ERROR_DS_DOMAIN_VERSION_TOO_HIGH
The version of the operating system installed is incompatible with the current domain functional level. You must upgrade to a new version of the operating system before this server can become a domain controller in this domain.
0x00002175 – ERROR_DS_FOREST_VERSION_TOO_LOW
The version of the operating system installed on this server no longer supports the current forest functional level. You must raise the forest functional level before this server can become a domain controller in this forest.
0x00002176 – ERROR_DS_DOMAIN_VERSION_TOO_LOW
The version of the operating system installed on this server no longer supports the current domain functional level. You must raise the domain functional level before this server can become a domain controller in this domain.
0x00002177 – ERROR_DS_INCOMPATIBLE_VERSION
The version of the operating system installed on this server is incompatible with the functional level of the domain or forest.
0x00002178 – ERROR_DS_LOW_DSA_VERSION
The functional level of the domain (or forest) cannot be raised to the requested value because one or more domain controllers in the domain (or forest) are at a lower, incompatible functional level.
0x00002179 – ERROR_DS_NO_BEHAVIOR_VERSION_IN_MIXEDDOMAIN
The forest functional level cannot be raised to the requested value because one or more domains are still in mixed-domain mode. All domains in the forest must be in native mode for you to raise the forest functional level.
0x0000217A – ERROR_DS_NOT_SUPPORTED_SORT_ORDER
The sort order requested is not supported.
0x0000217B – ERROR_DS_NAME_NOT_UNIQUE
The requested name already exists as a unique identifier.
0x0000217C – ERROR_DS_MACHINE_ACCOUNT_CREATED_PRENT4
The machine account was created before Windows NT 4.0. The account needs to be re-created.
0x0000217D – ERROR_DS_OUT_OF_VERSION_STORE
The database is out of version store.
0x0000217E – ERROR_DS_INCOMPATIBLE_CONTROLS_USED
Unable to continue operation because multiple conflicting controls were used.
0x0000217F – ERROR_DS_NO_REF_DOMAIN
Unable to find a valid security descriptor reference domain for this partition.
0x00002180 – ERROR_DS_RESERVED_LINK_ID
Schema update failed: The link identifier is reserved.
0x00002181 – ERROR_DS_LINK_ID_NOT_AVAILABLE
Schema update failed: There are no link identifiers available.
0x00002182 – ERROR_DS_AG_CANT_HAVE_UNIVERSAL_MEMBER
An account group cannot have a universal group as a member.
0x00002183 – ERROR_DS_MODIFYDN_DISALLOWED_BY_INSTANCE_TYPE
Rename or move operations on naming context heads or read-only objects are not allowed.
0x00002184 – ERROR_DS_NO_OBJECT_MOVE_IN_SCHEMA_NC
Move operations on objects in the schema naming context are not allowed.
0x00002185 – ERROR_DS_MODIFYDN_DISALLOWED_BY_FLAG
A system flag has been set on the object that does not allow the object to be moved or renamed.
0x00002186 – ERROR_DS_MODIFYDN_WRONG_GRANDPARENT
This object is not allowed to change its grandparent container. Moves are not forbidden on this object, but are restricted to sibling containers.
0x00002187 – ERROR_DS_NAME_ERROR_TRUST_REFERRAL
Unable to resolve completely; a referral to another forest was generated.
0x00002188 – ERROR_NOT_SUPPORTED_ON_STANDARD_SERVER
The requested action is not supported on a standard server.
0x00002189 – ERROR_DS_CANT_ACCESS_REMOTE_PART_OF_AD
Could not access a partition of the directory service located on a remote server. Make sure at least one server is running for the partition in question.
0x0000218A – ERROR_DS_CR_IMPOSSIBLE_TO_VALIDATE_V2
The directory cannot validate the proposed naming context (or partition) name because it does not hold a replica, nor can it contact a replica of the naming context above the proposed naming context. Ensure that the parent naming context is properly registered in the DNS, and at least one replica of this naming context is reachable by the domain naming master.
0x0000218B – ERROR_DS_THREAD_LIMIT_EXCEEDED
The thread limit for this request was exceeded.
0x0000218C – ERROR_DS_NOT_CLOSEST
The GC server is not in the closest site.
0x0000218D – ERROR_DS_CANT_DERIVE_SPN_WITHOUT_SERVER_REF
The directory service cannot derive an SPN with which to mutually authenticate the target server because the corresponding server object in the local DS database has no serverReference attribute.
0x0000218E – ERROR_DS_SINGLE_USER_MODE_FAILED
The directory service failed to enter single-user mode.
0x0000218F – ERROR_DS_NTDSCRIPT_SYNTAX_ERROR
The directory service cannot parse the script because of a syntax error.
0x00002190 – ERROR_DS_NTDSCRIPT_PROCESS_ERROR
The directory service cannot process the script because of an error.
0x00002191 – ERROR_DS_DIFFERENT_REPL_EPOCHS
The directory service cannot perform the requested operation because the servers involved are of different replication epochs (which is usually related to a domain rename that is in progress).
0x00002192 – ERROR_DS_DRS_EXTENSIONS_CHANGED
The directory service binding must be renegotiated due to a change in the server extensions information.
0x00002193 – ERROR_DS_REPLICA_SET_CHANGE_NOT_ALLOWED_ON_DISABLED_CR
The operation is not allowed on a disabled cross-reference.
0x00002194 – ERROR_DS_NO_MSDS_INTID
Schema update failed: No values for msDS-IntId are available.
0x00002195 – ERROR_DS_DUP_MSDS_INTID
Schema update failed: Duplicate msDS-IntId. Retry the operation.
0x00002196 – ERROR_DS_EXISTS_IN_RDNATTID
Schema deletion failed: Attribute is used in rDNAttID.
0x00002197 – ERROR_DS_AUTHORIZATION_FAILED
The directory service failed to authorize the request.
0x00002198 – ERROR_DS_INVALID_SCRIPT
The directory service cannot process the script because it is invalid.
0x00002199 – ERROR_DS_REMOTE_CROSSREF_OP_FAILED
The remote create cross-reference operation failed on the domain naming master FSMO. The operation's error is in the extended data.
0x0000219A – ERROR_DS_CROSS_REF_BUSY
A cross-reference is in use locally with the same name.
0x0000219B – ERROR_DS_CANT_DERIVE_SPN_FOR_DELETED_DOMAIN
The directory service cannot derive an SPN with which to mutually authenticate the target server because the server's domain has been deleted from the forest.
0x0000219C – ERROR_DS_CANT_DEMOTE_WITH_WRITEABLE_NC
Writable NCs prevent this DC from demoting.
0x0000219D – ERROR_DS_DUPLICATE_ID_FOUND
The requested object has a nonunique identifier and cannot be retrieved.
0x0000219E – ERROR_DS_INSUFFICIENT_ATTR_TO_CREATE_OBJECT
Insufficient attributes were given to create an object. This object might not exist because it might have been deleted and the garbage already collected.
0x0000219F – ERROR_DS_GROUP_CONVERSION_ERROR
The group cannot be converted due to attribute restrictions on the requested group type.
0x000021A0 – ERROR_DS_CANT_MOVE_APP_BASIC_GROUP
Cross-domain moves of nonempty basic application groups is not allowed.
0x000021A1 – ERROR_DS_CANT_MOVE_APP_QUERY_GROUP
Cross-domain moves of nonempty query-based application groups is not allowed.
0x000021A2 – ERROR_DS_ROLE_NOT_VERIFIED
The FSMO role ownership could not be verified because its directory partition did not replicate successfully with at least one replication partner.
0x000021A3 – ERROR_DS_WKO_CONTAINER_CANNOT_BE_SPECIAL
The target container for a redirection of a well-known object container cannot already be a special container.
0x000021A4 – ERROR_DS_DOMAIN_RENAME_IN_PROGRESS
The directory service cannot perform the requested operation because a domain rename operation is in progress.
0x000021A5 – ERROR_DS_EXISTING_AD_CHILD_NC
The directory service detected a child partition below the requested partition name. The partition hierarchy must be created in a top down method.
0x000021A6 – ERROR_DS_REPL_LIFETIME_EXCEEDED
The directory service cannot replicate with this server because the time since the last replication with this server has exceeded the tombstone lifetime.
0x000021A7 – ERROR_DS_DISALLOWED_IN_SYSTEM_CONTAINER
The requested operation is not allowed on an object under the system container.
0x000021A8 – ERROR_DS_LDAP_SEND_QUEUE_FULL
The LDAP server's network send queue has filled up because the client is not processing the results of its requests fast enough. No more requests will be processed until the client catches up. If the client does not catch up then it will be disconnected.
0x000021A9 – ERROR_DS_DRA_OUT_SCHEDULE_WINDOW
The scheduled replication did not take place because the system was too busy to execute the request within the schedule window. The replication queue is overloaded. Consider reducing the number of partners or decreasing the scheduled replication frequency.
0x000021AA – ERROR_DS_POLICY_NOT_KNOWN
At this time, it cannot be determined if the branch replication policy is available on the hub domain controller. Retry at a later time to account for replication latencies.
0x000021AB – ERROR_NO_SITE_SETTINGS_OBJECT
The site settings object for the specified site does not exist.
0x000021AC – ERROR_NO_SECRETS
The local account store does not contain secret material for the specified account.
0x000021AD – ERROR_NO_WRITABLE_DC_FOUND
Could not find a writable domain controller in the domain.
0x000021AE – ERROR_DS_NO_SERVER_OBJECT
The server object for the domain controller does not exist.
0x000021AF – ERROR_DS_NO_NTDSA_OBJECT
The NTDS Settings object for the domain controller does not exist.
0x000021B0 – ERROR_DS_NON_ASQ_SEARCH
The requested search operation is not supported for attribute scoped query (ASQ) searches.
0x000021B1 – ERROR_DS_AUDIT_FAILURE
A required audit event could not be generated for the operation.
0x000021B2 – ERROR_DS_INVALID_SEARCH_FLAG_SUBTREE
The search flags for the attribute are invalid. The subtree index bit is valid only on single-valued attributes.
0x000021B3 – ERROR_DS_INVALID_SEARCH_FLAG_TUPLE
The search flags for the attribute are invalid. The tuple index bit is valid only on attributes of Unicode strings.
0x000021BF – ERROR_DS_DRA_RECYCLED_TARGET
The replication operation failed because the target object referenced by a link value is recycled.
0x000021C2 – ERROR_DS_HIGH_DSA_VERSION
The functional level of the domain (or forest) cannot be lowered to the requested value.
0x000021C7 – ERROR_DS_SPN_VALUE_NOT_UNIQUE_IN_FOREST
The operation failed because the SPN value provided for addition/modification is not unique forest-wide.
0x000021C8 – ERROR_DS_UPN_VALUE_NOT_UNIQUE_IN_FOREST
The operation failed because the UPN value provided for addition/modification is not unique forest-wide.
0x00002329 – DNS_ERROR_RCODE_FORMAT_ERROR
DNS server unable to interpret format.
0x0000232A – DNS_ERROR_RCODE_SERVER_FAILURE
DNS server failure.
0x0000232B – DNS_ERROR_RCODE_NAME_ERROR
DNS name does not exist.
0x0000232C – DNS_ERROR_RCODE_NOT_IMPLEMENTED
DNS request not supported by name server.
0x0000232D – DNS_ERROR_RCODE_REFUSED
DNS operation refused.
0x0000232E – DNS_ERROR_RCODE_YXDOMAIN
DNS name that should not exist, does exist.
0x0000232F – DNS_ERROR_RCODE_YXRRSET
DNS resource record (RR) set that should not exist, does exist.
0x00002330 – DNS_ERROR_RCODE_NXRRSET
DNS RR set that should to exist, does not exist.
0x00002331 – DNS_ERROR_RCODE_NOTAUTH
DNS server not authoritative for zone.
0x00002332 – DNS_ERROR_RCODE_NOTZONE
DNS name in update or prereq is not in zone.
0x00002338 – DNS_ERROR_RCODE_BADSIG
DNS signature failed to verify.
0x00002339 – DNS_ERROR_RCODE_BADKEY
DNS bad key.
0x0000233A – DNS_ERROR_RCODE_BADTIME
DNS signature validity expired.
0x0000251D – DNS_INFO_NO_RECORDS
No records found for given DNS query.
0x0000251E – DNS_ERROR_BAD_PACKET
Bad DNS packet.
0x0000251F – DNS_ERROR_NO_PACKET
No DNS packet.
0x00002520 – DNS_ERROR_RCODE
DNS error, check rcode.
0x00002521 – DNS_ERROR_UNSECURE_PACKET
Unsecured DNS packet.
0x0000254F – DNS_ERROR_INVALID_TYPE
Invalid DNS type.
0x00002550 – DNS_ERROR_INVALID_IP_ADDRESS
Invalid IP address.
0x00002551 – DNS_ERROR_INVALID_PROPERTY
Invalid property.
0x00002552 – DNS_ERROR_TRY_AGAIN_LATER
Try DNS operation again later.
0x00002553 – DNS_ERROR_NOT_UNIQUE
Record for given name and type is not unique.
0x00002554 – DNS_ERROR_NON_RFC_NAME
DNS name does not comply with RFC specifications.
0x00002555 – DNS_STATUS_FQDN
DNS name is a fully qualified DNS name.
0x00002556 – DNS_STATUS_DOTTED_NAME
DNS name is dotted (multilabel).
0x00002557 – DNS_STATUS_SINGLE_PART_NAME
DNS name is a single-part name.
0x00002558 – DNS_ERROR_INVALID_NAME_CHAR
DNS name contains an invalid character.
0x00002559 – DNS_ERROR_NUMERIC_NAME
DNS name is entirely numeric.
0x0000255A – DNS_ERROR_NOT_ALLOWED_ON_ROOT_SERVER
The operation requested is not permitted on a DNS root server.
0x0000255B – DNS_ERROR_NOT_ALLOWED_UNDER_DELEGATION
The record could not be created because this part of the DNS namespace has been delegated to another server.
0x0000255C – DNS_ERROR_CANNOT_FIND_ROOT_HINTS
The DNS server could not find a set of root hints.
0x0000255D – DNS_ERROR_INCONSISTENT_ROOT_HINTS
The DNS server found root hints but they were not consistent across all adapters.
0x0000255E – DNS_ERROR_DWORD_VALUE_TOO_SMALL
The specified value is too small for this parameter.
0x0000255F – DNS_ERROR_DWORD_VALUE_TOO_LARGE
The specified value is too large for this parameter.
0x00002560 – DNS_ERROR_BACKGROUND_LOADING
This operation is not allowed while the DNS server is loading zones in the background. Try again later.
0x00002561 – DNS_ERROR_NOT_ALLOWED_ON_RODC
The operation requested is not permitted on against a DNS server running on a read-only DC.
0x00002581 – DNS_ERROR_ZONE_DOES_NOT_EXIST
DNS zone does not exist.
0x00002582 – DNS_ERROR_NO_ZONE_INFO
DNS zone information not available.
0x00002583 – DNS_ERROR_INVALID_ZONE_OPERATION
Invalid operation for DNS zone.
0x00002584 – DNS_ERROR_ZONE_CONFIGURATION_ERROR
Invalid DNS zone configuration.
0x00002585 – DNS_ERROR_ZONE_HAS_NO_SOA_RECORD
DNS zone has no start of authority (SOA) record.
0x00002586 – DNS_ERROR_ZONE_HAS_NO_NS_RECORDS
DNS zone has no Name Server (NS) record.
0x00002587 – DNS_ERROR_ZONE_LOCKED
DNS zone is locked.
0x00002588 – DNS_ERROR_ZONE_CREATION_FAILED
DNS zone creation failed.
0x00002589 – DNS_ERROR_ZONE_ALREADY_EXISTS
DNS zone already exists.
0x0000258A – DNS_ERROR_AUTOZONE_ALREADY_EXISTS
DNS automatic zone already exists.
0x0000258B – DNS_ERROR_INVALID_ZONE_TYPE
Invalid DNS zone type.
0x0000258C – DNS_ERROR_SECONDARY_REQUIRES_MASTER_IP
Secondary DNS zone requires master IP address.
0x0000258D – DNS_ERROR_ZONE_NOT_SECONDARY
DNS zone not secondary.
0x0000258E – DNS_ERROR_NEED_SECONDARY_ADDRESSES
Need secondary IP address.
0x0000258F – DNS_ERROR_WINS_INIT_FAILED
WINS initialization failed.
0x00002590 – DNS_ERROR_NEED_WINS_SERVERS
Need WINS servers.
0x00002591 – DNS_ERROR_NBSTAT_INIT_FAILED
NBTSTAT initialization call failed.
0x00002592 – DNS_ERROR_SOA_DELETE_INVALID
Invalid delete of SOA.
0x00002593 – DNS_ERROR_FORWARDER_ALREADY_EXISTS
A conditional forwarding zone already exists for that name.
0x00002594 – DNS_ERROR_ZONE_REQUIRES_MASTER_IP
This zone must be configured with one or more master DNS server IP addresses.
0x00002595 – DNS_ERROR_ZONE_IS_SHUTDOWN
The operation cannot be performed because this zone is shut down.
0x000025B3 – DNS_ERROR_PRIMARY_REQUIRES_DATAFILE
The primary DNS zone requires a data file.
0x000025B4 – DNS_ERROR_INVALID_DATAFILE_NAME
Invalid data file name for the DNS zone.
0x000025B5 – DNS_ERROR_DATAFILE_OPEN_FAILURE
Failed to open the data file for the DNS zone.
0x000025B6 – DNS_ERROR_FILE_WRITEBACK_FAILED
Failed to write the data file for the DNS zone.
0x000025B7 – DNS_ERROR_DATAFILE_PARSING
Failure while reading datafile for DNS zone.
0x000025E5 – DNS_ERROR_RECORD_DOES_NOT_EXIST
DNS record does not exist.
0x000025E6 – DNS_ERROR_RECORD_FORMAT
DNS record format error.
0x000025E7 – DNS_ERROR_NODE_CREATION_FAILED
Node creation failure in DNS.
0x000025E8 – DNS_ERROR_UNKNOWN_RECORD_TYPE
Unknown DNS record type.
0x000025E9 – DNS_ERROR_RECORD_TIMED_OUT
DNS record timed out.
0x000025EA – DNS_ERROR_NAME_NOT_IN_ZONE
Name not in DNS zone.
0x000025EB – DNS_ERROR_CNAME_LOOP
CNAME loop detected.
0x000025EC – DNS_ERROR_NODE_IS_CNAME
Node is a CNAME DNS record.
0x000025ED – DNS_ERROR_CNAME_COLLISION
A CNAME record already exists for the given name.
0x000025EE – DNS_ERROR_RECORD_ONLY_AT_ZONE_ROOT
Record is only at DNS zone root.
0x000025EF – DNS_ERROR_RECORD_ALREADY_EXISTS
DNS record already exists.
0x000025F0 – DNS_ERROR_SECONDARY_DATA
Secondary DNS zone data error.
0x000025F1 – DNS_ERROR_NO_CREATE_CACHE_DATA
Could not create DNS cache data.
0x000025F2 – DNS_ERROR_NAME_DOES_NOT_EXIST
DNS name does not exist.
0x000025F3 – DNS_WARNING_PTR_CREATE_FAILED
Could not create pointer (PTR) record.
0x000025F4 – DNS_WARNING_DOMAIN_UNDELETED
DNS domain was undeleted.
0x000025F5 – DNS_ERROR_DS_UNAVAILABLE
The directory service is unavailable.
0x000025F6 – DNS_ERROR_DS_ZONE_ALREADY_EXISTS
DNS zone already exists in the directory service.
0x000025F7 – DNS_ERROR_NO_BOOTFILE_IF_DS_ZONE
DNS server not creating or reading the boot file for the directory service integrated DNS zone.
0x00002617 – DNS_INFO_AXFR_COMPLETE
DNS AXFR (zone transfer) complete.
0x00002618 – DNS_ERROR_AXFR
DNS zone transfer failed.
0x00002619 – DNS_INFO_ADDED_LOCAL_WINS
Added local WINS server.
0x00002649 – DNS_STATUS_CONTINUE_NEEDED
Secure update call needs to continue update request.
0x0000267B – DNS_ERROR_NO_TCPIP
TCP/IP network protocol not installed.
0x0000267C – DNS_ERROR_NO_DNS_SERVERS
No DNS servers configured for local system.
0x000026AD – DNS_ERROR_DP_DOES_NOT_EXIST
The specified directory partition does not exist.
0x000026AE – DNS_ERROR_DP_ALREADY_EXISTS
The specified directory partition already exists.
0x000026AF – DNS_ERROR_DP_NOT_ENLISTED
This DNS server is not enlisted in the specified directory partition.
0x000026B0 – DNS_ERROR_DP_ALREADY_ENLISTED
This DNS server is already enlisted in the specified directory partition.
0x000026B1 – DNS_ERROR_DP_NOT_AVAILABLE
The directory partition is not available at this time. Wait a few minutes and try again.
0x000026B2 – DNS_ERROR_DP_FSMO_ERROR
The application directory partition operation failed. The domain controller holding the domain naming master role is down or unable to service the request or is not running Windows Server 2003.
0x00002714 – WSAEINTR
A blocking operation was interrupted by a call to WSACancelBlockingCall.
0x00002719 – WSAEBADF
The file handle supplied is not valid.
0x0000271D – WSAEACCES
An attempt was made to access a socket in a way forbidden by its access permissions.
0x0000271E – WSAEFAULT
The system detected an invalid pointer address in attempting to use a pointer argument in a call.
0x00002726 – WSAEINVAL
An invalid argument was supplied.
0x00002728 – WSAEMFILE
Too many open sockets.
0x00002733 – WSAEWOULDBLOCK
A nonblocking socket operation could not be completed immediately.
0x00002734 – WSAEINPROGRESS
A blocking operation is currently executing.
0x00002735 – WSAEALREADY
An operation was attempted on a nonblocking socket that already had an operation in progress.
0x00002736 – WSAENOTSOCK
An operation was attempted on something that is not a socket.
0x00002737 – WSAEDESTADDRREQ
A required address was omitted from an operation on a socket.
0x00002738 – WSAEMSGSIZE
A message sent on a datagram socket was larger than the internal message buffer or some other network limit, or the buffer used to receive a datagram into was smaller than the datagram itself.
0x00002739 – WSAEPROTOTYPE
A protocol was specified in the socket function call that does not support the semantics of the socket type requested.
0x0000273A – WSAENOPROTOOPT
An unknown, invalid, or unsupported option or level was specified in a getsockopt or setsockopt call.
0x0000273B – WSAEPROTONOSUPPORT
The requested protocol has not been configured into the system, or no implementation for it exists.
0x0000273C – WSAESOCKTNOSUPPORT
The support for the specified socket type does not exist in this address family.
0x0000273D – WSAEOPNOTSUPP
The attempted operation is not supported for the type of object referenced.
0x0000273E – WSAEPFNOSUPPORT
The protocol family has not been configured into the system or no implementation for it exists.
0x0000273F – WSAEAFNOSUPPORT
An address incompatible with the requested protocol was used.
0x00002740 – WSAEADDRINUSE
Only one usage of each socket address (protocol/network address/port) is normally permitted.
0x00002741 – WSAEADDRNOTAVAIL
The requested address is not valid in its context.
0x00002742 – WSAENETDOWN
A socket operation encountered a dead network.
0x00002743 – WSAENETUNREACH
A socket operation was attempted to an unreachable network.
0x00002744 – WSAENETRESET
The connection has been broken due to keep-alive activity detecting a failure while the operation was in progress.
0x00002745 – WSAECONNABORTED
An established connection was aborted by the software in your host machine.
0x00002746 – WSAECONNRESET
An existing connection was forcibly closed by the remote host.
0x00002747 – WSAENOBUFS
An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full.
0x00002748 – WSAEISCONN
A connect request was made on an already connected socket.
0x00002749 – WSAENOTCONN
A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied.
0x0000274A – WSAESHUTDOWN
A request to send or receive data was disallowed because the socket had already been shut down in that direction with a previous shutdown call.
0x0000274B – WSAETOOMANYREFS
Too many references to a kernel object.
0x0000274C – WSAETIMEDOUT
A connection attempt failed because the connected party did not properly respond after a period of time, or the established connection failed because the connected host failed to respond.
0x0000274D – WSAECONNREFUSED
No connection could be made because the target machine actively refused it.
0x0000274E – WSAELOOP
Cannot translate name.
0x0000274F – WSAENAMETOOLONG
Name or name component was too long.
0x00002750 – WSAEHOSTDOWN
A socket operation failed because the destination host was down.
0x00002751 – WSAEHOSTUNREACH
A socket operation was attempted to an unreachable host.
0x00002752 – WSAENOTEMPTY
Cannot remove a directory that is not empty.
0x00002753 – WSAEPROCLIM
A Windows Sockets implementation might have a limit on the number of applications that can use it simultaneously.
0x00002754 – WSAEUSERS
Ran out of quota.
0x00002755 – WSAEDQUOT
Ran out of disk quota.
0x00002756 – WSAESTALE
File handle reference is no longer available.
0x00002757 – WSAEREMOTE
Item is not available locally.
0x0000276B – WSASYSNOTREADY
WSAStartup cannot function at this time because the underlying system it uses to provide network services is currently unavailable.
0x0000276C – WSAVERNOTSUPPORTED
The Windows Sockets version requested is not supported.
0x0000276D – WSANOTINITIALISED
Either the application has not called WSAStartup, or WSAStartup failed.
0x00002775 – WSAEDISCON
Returned by WSARecv or WSARecvFrom to indicate that the remote party has initiated a graceful shutdown sequence.
0x00002776 – WSAENOMORE
No more results can be returned by WSALookupServiceNext.
0x00002777 – WSAECANCELLED
A call to WSALookupServiceEnd was made while this call was still processing. The call has been canceled.
0x00002778 – WSAEINVALIDPROCTABLE
The procedure call table is invalid.
0x00002779 – WSAEINVALIDPROVIDER
The requested service provider is invalid.
0x0000277A – WSAEPROVIDERFAILEDINIT
The requested service provider could not be loaded or initialized.
0x0000277B – WSASYSCALLFAILURE
A system call that should never fail has failed.
0x0000277C – WSASERVICE_NOT_FOUND
No such service is known. The service cannot be found in the specified namespace.
0x0000277D – WSATYPE_NOT_FOUND
The specified class was not found.
0x0000277E – WSA_E_NO_MORE
No more results can be returned by WSALookupServiceNext.
0x0000277F – WSA_E_CANCELLED
A call to WSALookupServiceEnd was made while this call was still processing. The call has been canceled.
0x00002780 – WSAEREFUSED
A database query failed because it was actively refused.
0x00002AF9 – WSAHOST_NOT_FOUND
No such host is known.
0x00002AFA – WSATRY_AGAIN
This is usually a temporary error during host name resolution and means that the local server did not receive a response from an authoritative server.
0x00002AFB – WSANO_RECOVERY
A nonrecoverable error occurred during a database lookup.
0x00002AFC – WSANO_DATA
The requested name is valid, but no data of the requested type was found.
0x00002AFD – WSA_QOS_RECEIVERS
At least one reserve has arrived.
0x00002AFE – WSA_QOS_SENDERS
At least one path has arrived.
0x00002AFF – WSA_QOS_NO_SENDERS
There are no senders.
0x00002B00 – WSA_QOS_NO_RECEIVERS
There are no receivers.
0x00002B01 – WSA_QOS_REQUEST_CONFIRMED
Reserve has been confirmed.
0x00002B02 – WSA_QOS_ADMISSION_FAILURE
Error due to lack of resources.
0x00002B03 – WSA_QOS_POLICY_FAILURE
Rejected for administrative reasons—bad credentials.
0x00002B04 – WSA_QOS_BAD_STYLE
Unknown or conflicting style.
0x00002B05 – WSA_QOS_BAD_OBJECT
There is a problem with some part of the filterspec or provider-specific buffer in general.
0x00002B06 – WSA_QOS_TRAFFIC_CTRL_ERROR
There is a problem with some part of the flowspec.
0x00002B07 – WSA_QOS_GENERIC_ERROR
General quality of serve (QOS) error.
0x00002B08 – WSA_QOS_ESERVICETYPE
An invalid or unrecognized service type was found in the flowspec.
0x00002B09 – WSA_QOS_EFLOWSPEC
An invalid or inconsistent flowspec was found in the QOS structure.
0x00002B0A – WSA_QOS_EPROVSPECBUF
Invalid QOS provider-specific buffer.
0x00002B0B – WSA_QOS_EFILTERSTYLE
An invalid QOS filter style was used.
0x00002B0C – WSA_QOS_EFILTERTYPE
An invalid QOS filter type was used.
0x00002B0D – WSA_QOS_EFILTERCOUNT
An incorrect number of QOS FILTERSPECs were specified in the FLOWDESCRIPTOR.
0x00002B0E – WSA_QOS_EOBJLENGTH
An object with an invalid ObjectLength field was specified in the QOS provider-specific buffer.
0x00002B0F – WSA_QOS_EFLOWCOUNT
An incorrect number of flow descriptors was specified in the QOS structure.
0x00002B10 – WSA_QOS_EUNKOWNPSOBJ
An unrecognized object was found in the QOS provider-specific buffer.
0x00002B11 – WSA_QOS_EPOLICYOBJ
An invalid policy object was found in the QOS provider-specific buffer.
0x00002B12 – WSA_QOS_EFLOWDESC
An invalid QOS flow descriptor was found in the flow descriptor list.
0x00002B13 – WSA_QOS_EPSFLOWSPEC
An invalid or inconsistent flowspec was found in the QOS provider-specific buffer.
0x00002B14 – WSA_QOS_EPSFILTERSPEC
An invalid FILTERSPEC was found in the QOS provider-specific buffer.
0x00002B15 – WSA_QOS_ESDMODEOBJ
An invalid shape discard mode object was found in the QOS provider-specific buffer.
0x00002B16 – WSA_QOS_ESHAPERATEOBJ
An invalid shaping rate object was found in the QOS provider-specific buffer.
0x00002B17 – WSA_QOS_RESERVED_PETYPE
A reserved policy element was found in the QOS provider-specific buffer.
0x000032C8 – ERROR_IPSEC_QM_POLICY_EXISTS
The specified quick mode policy already exists.
0x000032C9 – ERROR_IPSEC_QM_POLICY_NOT_FOUND
The specified quick mode policy was not found.
0x000032CA – ERROR_IPSEC_QM_POLICY_IN_USE
The specified quick mode policy is being used.
0x000032CB – ERROR_IPSEC_MM_POLICY_EXISTS
The specified main mode policy already exists.
0x000032CC – ERROR_IPSEC_MM_POLICY_NOT_FOUND
The specified main mode policy was not found.
0x000032CD – ERROR_IPSEC_MM_POLICY_IN_USE
The specified main mode policy is being used.
0x000032CE – ERROR_IPSEC_MM_FILTER_EXISTS
The specified main mode filter already exists.
0x000032CF – ERROR_IPSEC_MM_FILTER_NOT_FOUND
The specified main mode filter was not found.
0x000032D0 – ERROR_IPSEC_TRANSPORT_FILTER_EXISTS
The specified transport mode filter already exists.
0x000032D1 – ERROR_IPSEC_TRANSPORT_FILTER_NOT_FOUND
The specified transport mode filter does not exist.
0x000032D2 – ERROR_IPSEC_MM_AUTH_EXISTS
The specified main mode authentication list exists.
0x000032D3 – ERROR_IPSEC_MM_AUTH_NOT_FOUND
The specified main mode authentication list was not found.
0x000032D4 – ERROR_IPSEC_MM_AUTH_IN_USE
The specified main mode authentication list is being used.
0x000032D5 – ERROR_IPSEC_DEFAULT_MM_POLICY_NOT_FOUND
The specified default main mode policy was not found.
0x000032D6 – ERROR_IPSEC_DEFAULT_MM_AUTH_NOT_FOUND
The specified default main mode authentication list was not found.
0x000032D7 – ERROR_IPSEC_DEFAULT_QM_POLICY_NOT_FOUND
The specified default quick mode policy was not found.
0x000032D8 – ERROR_IPSEC_TUNNEL_FILTER_EXISTS
The specified tunnel mode filter exists.
0x000032D9 – ERROR_IPSEC_TUNNEL_FILTER_NOT_FOUND
The specified tunnel mode filter was not found.
0x000032DA – ERROR_IPSEC_MM_FILTER_PENDING_DELETION
The main mode filter is pending deletion.
0x000032DB – ERROR_IPSEC_TRANSPORT_FILTER_ENDING_DELETION
The transport filter is pending deletion.
0x000032DC – ERROR_IPSEC_TUNNEL_FILTER_PENDING_DELETION
The tunnel filter is pending deletion.
0x000032DD – ERROR_IPSEC_MM_POLICY_PENDING_ELETION
The main mode policy is pending deletion.
0x000032DE – ERROR_IPSEC_MM_AUTH_PENDING_DELETION
The main mode authentication bundle is pending deletion.
0x000032DF – ERROR_IPSEC_QM_POLICY_PENDING_DELETION
The quick mode policy is pending deletion.
0x000032E0 – WARNING_IPSEC_MM_POLICY_PRUNED
The main mode policy was successfully added, but some of the requested offers are not supported.
0x000032E1 – WARNING_IPSEC_QM_POLICY_PRUNED
The quick mode policy was successfully added, but some of the requested offers are not supported.
0x000035E8 – ERROR_IPSEC_IKE_NEG_STATUS_BEGIN
Starts the list of frequencies of various IKE Win32 error codes encountered during negotiations.
0x000035E9 – ERROR_IPSEC_IKE_AUTH_FAIL
The IKE authentication credentials are unacceptable.
0x000035EA – ERROR_IPSEC_IKE_ATTRIB_FAIL
The IKE security attributes are unacceptable.
0x000035EB – ERROR_IPSEC_IKE_NEGOTIATION_PENDING
The IKE negotiation is in progress.
0x000035EC – ERROR_IPSEC_IKE_GENERAL_PROCESSING_ERROR
General processing error.
0x000035ED – ERROR_IPSEC_IKE_TIMED_OUT
Negotiation timed out.
0x000035EE – ERROR_IPSEC_IKE_NO_CERT
The IKE failed to find a valid machine certificate. Contact your network security administrator about installing a valid certificate in the appropriate certificate store.
0x000035EF – ERROR_IPSEC_IKE_SA_DELETED
The IKE security association (SA) was deleted by a peer before it was completely established.
0x000035F0 – ERROR_IPSEC_IKE_SA_REAPED
The IKE SA was deleted before it was completely established.
0x000035F1 – ERROR_IPSEC_IKE_MM_ACQUIRE_DROP
The negotiation request sat in the queue too long.
0x000035F2 – ERROR_IPSEC_IKE_QM_ACQUIRE_DROP
The negotiation request sat in the queue too long.
0x000035F3 – ERROR_IPSEC_IKE_QUEUE_DROP_MM
The negotiation request sat in the queue too long.
0x000035F4 – ERROR_IPSEC_IKE_QUEUE_DROP_NO_MM
The negotiation request sat in the queue too long.
0x000035F5 – ERROR_IPSEC_IKE_DROP_NO_RESPONSE
There was no response from a peer.
0x000035F6 – ERROR_IPSEC_IKE_MM_DELAY_DROP
The negotiation took too long.
0x000035F7 – ERROR_IPSEC_IKE_QM_DELAY_DROP
The negotiation took too long.
0x000035F8 – ERROR_IPSEC_IKE_ERROR
An unknown error occurred.
0x000035F9 – ERROR_IPSEC_IKE_CRL_FAILED
The certificate revocation check failed.
0x000035FA – ERROR_IPSEC_IKE_INVALID_KEY_USAGE
Invalid certificate key usage.
0x000035FB – ERROR_IPSEC_IKE_INVALID_CERT_TYPE
Invalid certificate type.
0x000035FC – ERROR_IPSEC_IKE_NO_PRIVATE_KEY
The IKE negotiation failed because the machine certificate used does not have a private key. IPsec certificates require a private key. Contact your network security administrator about a certificate that has a private key.
0x000035FE – ERROR_IPSEC_IKE_DH_FAIL
There was a failure in the Diffie-Hellman computation.
0x00003600 – ERROR_IPSEC_IKE_INVALID_HEADER
Invalid header.
0x00003601 – ERROR_IPSEC_IKE_NO_POLICY
No policy configured.
0x00003602 – ERROR_IPSEC_IKE_INVALID_SIGNATURE
Failed to verify signature.
0x00003603 – ERROR_IPSEC_IKE_KERBEROS_ERROR
Failed to authenticate using Kerberos.
0x00003604 – ERROR_IPSEC_IKE_NO_PUBLIC_KEY
The peer's certificate did not have a public key.
0x00003605 – ERROR_IPSEC_IKE_PROCESS_ERR
Error processing the error payload.
0x00003606 – ERROR_IPSEC_IKE_PROCESS_ERR_SA
Error processing the SA payload.
0x00003607 – ERROR_IPSEC_IKE_PROCESS_ERR_PROP
Error processing the proposal payload.
0x00003608 – ERROR_IPSEC_IKE_PROCESS_ERR_TRANS
Error processing the transform payload.
0x00003609 – ERROR_IPSEC_IKE_PROCESS_ERR_KE
Error processing the key exchange payload.
0x0000360A – ERROR_IPSEC_IKE_PROCESS_ERR_ID
Error processing the ID payload.
0x0000360B – ERROR_IPSEC_IKE_PROCESS_ERR_CERT
Error processing the certification payload.
0x0000360C – ERROR_IPSEC_IKE_PROCESS_ERR_CERT_REQ
Error processing the certificate request payload.
0x0000360D – ERROR_IPSEC_IKE_PROCESS_ERR_HASH
Error processing the hash payload.
0x0000360E – ERROR_IPSEC_IKE_PROCESS_ERR_SIG
Error processing the signature payload.
0x0000360F – ERROR_IPSEC_IKE_PROCESS_ERR_NONCE
Error processing the nonce payload.
0x00003610 – ERROR_IPSEC_IKE_PROCESS_ERR_NOTIFY
Error processing the notify payload.
0x00003611 – ERROR_IPSEC_IKE_PROCESS_ERR_DELETE
Error processing the delete payload.
0x00003612 – ERROR_IPSEC_IKE_PROCESS_ERR_VENDOR
Error processing the VendorId payload.
0x00003613 – ERROR_IPSEC_IKE_INVALID_PAYLOAD
Invalid payload received.
0x00003614 – ERROR_IPSEC_IKE_LOAD_SOFT_SA
Soft SA loaded.
0x00003615 – ERROR_IPSEC_IKE_SOFT_SA_TORN_DOWN
Soft SA torn down.
0x00003616 – ERROR_IPSEC_IKE_INVALID_COOKIE
Invalid cookie received.
0x00003617 – ERROR_IPSEC_IKE_NO_PEER_CERT
Peer failed to send valid machine certificate.
0x00003618 – ERROR_IPSEC_IKE_PEER_CRL_FAILED
Certification revocation check of peer's certificate failed.
0x00003619 – ERROR_IPSEC_IKE_POLICY_CHANGE
New policy invalidated SAs formed with the old policy.
0x0000361A – ERROR_IPSEC_IKE_NO_MM_POLICY
There is no available main mode IKE policy.
0x0000361B – ERROR_IPSEC_IKE_NOTCBPRIV
Failed to enabled trusted computer base (TCB) privilege.
0x0000361C – ERROR_IPSEC_IKE_SECLOADFAIL
Failed to load SECURITY.DLL.
0x0000361D – ERROR_IPSEC_IKE_FAILSSPINIT
Failed to obtain the security function table dispatch address from the SSPI.
0x0000361E – ERROR_IPSEC_IKE_FAILQUERYSSP
Failed to query the Kerberos package to obtain the max token size.
0x0000361F – ERROR_IPSEC_IKE_SRVACQFAIL
Failed to obtain the Kerberos server credentials for the Internet Security Association and Key Management Protocol (ISAKMP)/ERROR_IPSEC_IKE service. Kerberos authentication will not function. The most likely reason for this is lack of domain membership. This is normal if your computer is a member of a workgroup.
0x00003620 – ERROR_IPSEC_IKE_SRVQUERYCRED
Failed to determine the SSPI principal name for ISAKMP/ERROR_IPSEC_IKE service (QueryCredentialsAttributes).
0x00003621 – ERROR_IPSEC_IKE_GETSPIFAIL
Failed to obtain a new service provider interface (SPI) for the inbound SA from the IPsec driver. The most common cause for this is that the driver does not have the correct filter. Check your policy to verify the filters.
0x00003622 – ERROR_IPSEC_IKE_INVALID_FILTER
Given filter is invalid.
0x00003623 – ERROR_IPSEC_IKE_OUT_OF_MEMORY
Memory allocation failed.
0x00003624 – ERROR_IPSEC_IKE_ADD_UPDATE_KEY_FAILED
Failed to add an SA to the IPSec driver. The most common cause for this is if the IKE negotiation took too long to complete. If the problem persists, reduce the load on the faulting machine.
0x00003625 – ERROR_IPSEC_IKE_INVALID_POLICY
Invalid policy.
0x00003626 – ERROR_IPSEC_IKE_UNKNOWN_DOI
Invalid digital object identifier (DOI).
0x00003627 – ERROR_IPSEC_IKE_INVALID_SITUATION
Invalid situation.
0x00003628 – ERROR_IPSEC_IKE_DH_FAILURE
Diffie-Hellman failure.
0x00003629 – ERROR_IPSEC_IKE_INVALID_GROUP
Invalid Diffie-Hellman group.
0x0000362A – ERROR_IPSEC_IKE_ENCRYPT
Error encrypting payload.
0x0000362B – ERROR_IPSEC_IKE_DECRYPT
Error decrypting payload.
0x0000362C – ERROR_IPSEC_IKE_POLICY_MATCH
Policy match error.
0x0000362D – ERROR_IPSEC_IKE_UNSUPPORTED_ID
Unsupported ID.
0x0000362E – ERROR_IPSEC_IKE_INVALID_HASH
Hash verification failed.
0x0000362F – ERROR_IPSEC_IKE_INVALID_HASH_ALG
Invalid hash algorithm.
0x00003630 – ERROR_IPSEC_IKE_INVALID_HASH_SIZE
Invalid hash size.
0x00003631 – ERROR_IPSEC_IKE_INVALID_ENCRYPT_ALG
Invalid encryption algorithm.
0x00003632 – ERROR_IPSEC_IKE_INVALID_AUTH_ALG
Invalid authentication algorithm.
0x00003633 – ERROR_IPSEC_IKE_INVALID_SIG
Invalid certificate signature.
0x00003634 – ERROR_IPSEC_IKE_LOAD_FAILED
Load failed.
0x00003635 – ERROR_IPSEC_IKE_RPC_DELETE
Deleted by using an RPC call.
0x00003636 – ERROR_IPSEC_IKE_BENIGN_REINIT
A temporary state was created to perform reinitialization. This is not a real failure.
0x00003637 – ERROR_IPSEC_IKE_INVALID_RESPONDER_LIFETIME_NOTIFY
The lifetime value received in the Responder Lifetime Notify is below the Windows 2000 configured minimum value. Fix the policy on the peer machine.
0x00003639 – ERROR_IPSEC_IKE_INVALID_CERT_KEYLEN
Key length in the certificate is too small for configured security requirements.
0x0000363A – ERROR_IPSEC_IKE_MM_LIMIT
Maximum number of established MM SAs to peer exceeded.
0x0000363B – ERROR_IPSEC_IKE_NEGOTIATION_DISABLED
The IKE received a policy that disables negotiation.
0x0000363C – ERROR_IPSEC_IKE_QM_LIMIT
Reached maximum quick mode limit for the main mode. New main mode will be started.
0x0000363D – ERROR_IPSEC_IKE_MM_EXPIRED
Main mode SA lifetime expired or the peer sent a main mode delete.
0x0000363E – ERROR_IPSEC_IKE_PEER_MM_ASSUMED_INVALID
Main mode SA assumed to be invalid because peer stopped responding.
0x0000363F – ERROR_IPSEC_IKE_CERT_CHAIN_POLICY_MISMATCH
Certificate does not chain to a trusted root in IPsec policy.
0x00003640 – ERROR_IPSEC_IKE_UNEXPECTED_MESSAGE_ID
Received unexpected message ID.
0x00003641 – ERROR_IPSEC_IKE_INVALID_UMATTS
Received invalid AuthIP user mode attributes.
0x00003642 – ERROR_IPSEC_IKE_DOS_COOKIE_SENT
Sent DOS cookie notify to initiator.
0x00003643 – ERROR_IPSEC_IKE_SHUTTING_DOWN
The IKE service is shutting down.
0x00003644 – ERROR_IPSEC_IKE_CGA_AUTH_FAILED
Could not verify the binding between the color graphics adapter (CGA) address and the certificate.
0x00003645 – ERROR_IPSEC_IKE_PROCESS_ERR_NATOA
Error processing the NatOA payload.
0x00003646 – ERROR_IPSEC_IKE_INVALID_MM_FOR_QM
The parameters of the main mode are invalid for this quick mode.
0x00003647 – ERROR_IPSEC_IKE_QM_EXPIRED
The quick mode SA was expired by the IPsec driver.
0x00003648 – ERROR_IPSEC_IKE_TOO_MANY_FILTERS
Too many dynamically added IKEEXT filters were detected.
0x00003649 – ERROR_IPSEC_IKE_NEG_STATUS_END
Ends the list of frequencies of various IKE Win32 error codes encountered during negotiations.
0x000036B0 – ERROR_SXS_SECTION_NOT_FOUND
The requested section was not present in the activation context.
0x000036B1 – ERROR_SXS_CANT_GEN_ACTCTX
The application has failed to start because its side-by-side configuration is incorrect. See the application event log for more detail.
0x000036B2 – ERROR_SXS_INVALID_ACTCTXDATA_FORMAT
The application binding data format is invalid.
0x000036B3 – ERROR_SXS_ASSEMBLY_NOT_FOUND
The referenced assembly is not installed on your system.
0x000036B4 – ERROR_SXS_MANIFEST_FORMAT_ERROR
The manifest file does not begin with the required tag and format information.
0x000036B5 – ERROR_SXS_MANIFEST_PARSE_ERROR
The manifest file contains one or more syntax errors.
0x000036B6 – ERROR_SXS_ACTIVATION_CONTEXT_DISABLED
The application attempted to activate a disabled activation context.
0x000036B7 – ERROR_SXS_KEY_NOT_FOUND
The requested lookup key was not found in any active activation context.
0x000036B8 – ERROR_SXS_VERSION_CONFLICT
A component version required by the application conflicts with another active component version.
0x000036B9 – ERROR_SXS_WRONG_SECTION_TYPE
The type requested activation context section does not match the query API used.
0x000036BA – ERROR_SXS_THREAD_QUERIES_DISABLED
Lack of system resources has required isolated activation to be disabled for the current thread of execution.
0x000036BB – ERROR_SXS_PROCESS_DEFAULT_ALREADY_SET
An attempt to set the process default activation context failed because the process default activation context was already set.
0x000036BC – ERROR_SXS_UNKNOWN_ENCODING_GROUP
The encoding group identifier specified is not recognized.
0x000036BD – ERROR_SXS_UNKNOWN_ENCODING
The encoding requested is not recognized.
0x000036BE – ERROR_SXS_INVALID_XML_NAMESPACE_URI
The manifest contains a reference to an invalid URI.
0x000036BF – ERROR_SXS_ROOT_MANIFEST_DEPENDENCY_OT_INSTALLED
The application manifest contains a reference to a dependent assembly that is not installed.
0x000036C0 – ERROR_SXS_LEAF_MANIFEST_DEPENDENCY_NOT_INSTALLED
The manifest for an assembly used by the application has a reference to a dependent assembly that is not installed.
0x000036C1 – ERROR_SXS_INVALID_ASSEMBLY_IDENTITY_ATTRIBUTE
The manifest contains an attribute for the assembly identity that is not valid.
0x000036C2 – ERROR_SXS_MANIFEST_MISSING_REQUIRED_DEFAULT_NAMESPACE
The manifest is missing the required default namespace specification on the assembly element.
0x000036C3 – ERROR_SXS_MANIFEST_INVALID_REQUIRED_DEFAULT_NAMESPACE
The manifest has a default namespace specified on the assembly element but its value is not urn:schemas-microsoft-com:asm.v1"."
0x000036C4 – ERROR_SXS_PRIVATE_MANIFEST_CROSS_PATH_WITH_REPARSE_POINT
The private manifest probed has crossed the reparse-point-associated path.
0x000036C5 – ERROR_SXS_DUPLICATE_DLL_NAME
Two or more components referenced directly or indirectly by the application manifest have files by the same name.
0x000036C6 – ERROR_SXS_DUPLICATE_WINDOWCLASS_NAME
Two or more components referenced directly or indirectly by the application manifest have window classes with the same name.
0x000036C7 – ERROR_SXS_DUPLICATE_CLSID
Two or more components referenced directly or indirectly by the application manifest have the same COM server CLSIDs.
0x000036C8 – ERROR_SXS_DUPLICATE_IID
Two or more components referenced directly or indirectly by the application manifest have proxies for the same COM interface IIDs.
0x000036C9 – ERROR_SXS_DUPLICATE_TLBID
Two or more components referenced directly or indirectly by the application manifest have the same COM type library TLBIDs.
0x000036CA – ERROR_SXS_DUPLICATE_PROGID
Two or more components referenced directly or indirectly by the application manifest have the same COM ProgIDs.
0x000036CB – ERROR_SXS_DUPLICATE_ASSEMBLY_NAME
Two or more components referenced directly or indirectly by the application manifest are different versions of the same component, which is not permitted.
0x000036CC – ERROR_SXS_FILE_HASH_MISMATCH
A component's file does not match the verification information present in the component manifest.
0x000036CD – ERROR_SXS_POLICY_PARSE_ERROR
The policy manifest contains one or more syntax errors.
0x000036CE – ERROR_SXS_XML_E_MISSINGQUOTE
Manifest Parse Error: A string literal was expected, but no opening quotation mark was found.
0x000036CF – ERROR_SXS_XML_E_COMMENTSYNTAX
Manifest Parse Error: Incorrect syntax was used in a comment.
0x000036D0 – ERROR_SXS_XML_E_BADSTARTNAMECHAR
Manifest Parse Error: A name started with an invalid character.
0x000036D1 – ERROR_SXS_XML_E_BADNAMECHAR
Manifest Parse Error: A name contained an invalid character.
0x000036D2 – ERROR_SXS_XML_E_BADCHARINSTRING
Manifest Parse Error: A string literal contained an invalid character.
0x000036D3 – ERROR_SXS_XML_E_XMLDECLSYNTAX
Manifest Parse Error: Invalid syntax for an XML declaration.
0x000036D4 – ERROR_SXS_XML_E_BADCHARDATA
Manifest Parse Error: An Invalid character was found in text content.
0x000036D5 – ERROR_SXS_XML_E_MISSINGWHITESPACE
Manifest Parse Error: Required white space was missing.
0x000036D6 – ERROR_SXS_XML_E_EXPECTINGTAGEND
Manifest Parse Error: The angle bracket (>) character was expected.
0x000036D7 – ERROR_SXS_XML_E_MISSINGSEMICOLON
Manifest Parse Error: A semicolon (;) was expected.
0x000036D8 – ERROR_SXS_XML_E_UNBALANCEDPAREN
Manifest Parse Error: Unbalanced parentheses.
0x000036D9 – ERROR_SXS_XML_E_INTERNALERROR
Manifest Parse Error: Internal error.
0x000036DA – ERROR_SXS_XML_E_UNEXPECTED_WHITESPACE
Manifest Parse Error: Whitespace is not allowed at this location.
0x000036DB – ERROR_SXS_XML_E_INCOMPLETE_ENCODING
Manifest Parse Error: End of file reached in invalid state for current encoding.
0x000036DC – ERROR_SXS_XML_E_MISSING_PAREN
Manifest Parse Error: Missing parenthesis.
0x000036DD – ERROR_SXS_XML_E_EXPECTINGCLOSEQUOTE
Manifest Parse Error: A single (') or double (") quotation mark is missing.
0x000036DE – ERROR_SXS_XML_E_MULTIPLE_COLONS
Manifest Parse Error: Multiple colons are not allowed in a name.
0x000036DF – ERROR_SXS_XML_E_INVALID_DECIMAL
Manifest Parse Error: Invalid character for decimal digit.
0x000036E0 – ERROR_SXS_XML_E_INVALID_HEXIDECIMAL
Manifest Parse Error: Invalid character for hexadecimal digit.
0x000036E1 – ERROR_SXS_XML_E_INVALID_UNICODE
Manifest Parse Error: Invalid Unicode character value for this platform.
0x000036E2 – ERROR_SXS_XML_E_WHITESPACEORQUESTIONMARK
Manifest Parse Error: Expecting whitespace or question mark (?).
0x000036E3 – ERROR_SXS_XML_E_UNEXPECTEDENDTAG
Manifest Parse Error: End tag was not expected at this location.
0x000036E4 – ERROR_SXS_XML_E_UNCLOSEDTAG
Manifest Parse Error: The following tags were not closed: %1.
0x000036E5 – ERROR_SXS_XML_E_DUPLICATEATTRIBUTE
Manifest Parse Error: Duplicate attribute.
0x000036E6 – ERROR_SXS_XML_E_MULTIPLEROOTS
Manifest Parse Error: Only one top-level element is allowed in an XML document.
0x000036E7 – ERROR_SXS_XML_E_INVALIDATROOTLEVEL
Manifest Parse Error: Invalid at the top level of the document.
0x000036E8 – ERROR_SXS_XML_E_BADXMLDECL
Manifest Parse Error: Invalid XML declaration.
0x000036E9 – ERROR_SXS_XML_E_MISSINGROOT
Manifest Parse Error: XML document must have a top-level element.
0x000036EA – ERROR_SXS_XML_E_UNEXPECTEDEOF
Manifest Parse Error: Unexpected end of file.
0x000036EB – ERROR_SXS_XML_E_BADPEREFINSUBSET
Manifest Parse Error: Parameter entities cannot be used inside markup declarations in an internal subset.
0x000036EC – ERROR_SXS_XML_E_UNCLOSEDSTARTTAG
Manifest Parse Error: Element was not closed.
0x000036ED – ERROR_SXS_XML_E_UNCLOSEDENDTAG
Manifest Parse Error: End element was missing the angle bracket (>) character.
0x000036EE – ERROR_SXS_XML_E_UNCLOSEDSTRING
Manifest Parse Error: A string literal was not closed.
0x000036EF – ERROR_SXS_XML_E_UNCLOSEDCOMMENT
Manifest Parse Error: A comment was not closed.
0x000036F0 – ERROR_SXS_XML_E_UNCLOSEDDECL
Manifest Parse Error: A declaration was not closed.
0x000036F1 – ERROR_SXS_XML_E_UNCLOSEDCDATA
Manifest Parse Error: A CDATA section was not closed.
0x000036F2 – ERROR_SXS_XML_E_RESERVEDNAMESPACE
Manifest Parse Error: The namespace prefix is not allowed to start with the reserved string xml"."
0x000036F3 – ERROR_SXS_XML_E_INVALIDENCODING
Manifest Parse Error: System does not support the specified encoding.
0x000036F4 – ERROR_SXS_XML_E_INVALIDSWITCH
Manifest Parse Error: Switch from current encoding to specified encoding not supported.
0x000036F5 – ERROR_SXS_XML_E_BADXMLCASE
Manifest Parse Error: The name "xml" is reserved and must be lowercase.
0x000036F6 – ERROR_SXS_XML_E_INVALID_STANDALONE
Manifest Parse Error: The stand-alone attribute must have the value "yes" or "no".
0x000036F7 – ERROR_SXS_XML_E_UNEXPECTED_STANDALONE
Manifest Parse Error: The stand-alone attribute cannot be used in external entities.
0x000036F8 – ERROR_SXS_XML_E_INVALID_VERSION
Manifest Parse Error: Invalid version number.
0x000036F9 – ERROR_SXS_XML_E_MISSINGEQUALS
Manifest Parse Error: Missing equal sign (=) between the attribute and the attribute value.
0x000036FA – ERROR_SXS_PROTECTION_RECOVERY_FAILED
Assembly Protection Error: Unable to recover the specified assembly.
0x000036FB – ERROR_SXS_PROTECTION_PUBLIC_KEY_OO_SHORT
Assembly Protection Error: The public key for an assembly was too short to be allowed.
0x000036FC – ERROR_SXS_PROTECTION_CATALOG_NOT_VALID
Assembly Protection Error: The catalog for an assembly is not valid, or does not match the assembly's manifest.
0x000036FD – ERROR_SXS_UNTRANSLATABLE_HRESULT
An HRESULT could not be translated to a corresponding Win32 error code.
0x000036FE – ERROR_SXS_PROTECTION_CATALOG_FILE_MISSING
Assembly Protection Error: The catalog for an assembly is missing.
0x000036FF – ERROR_SXS_MISSING_ASSEMBLY_IDENTITY_ATTRIBUTE
The supplied assembly identity is missing one or more attributes that must be present in this context.
0x00003700 – ERROR_SXS_INVALID_ASSEMBLY_IDENTITY_ATTRIBUTE_NAME
The supplied assembly identity has one or more attribute names that contain characters not permitted in XML names.
0x00003701 – ERROR_SXS_ASSEMBLY_MISSING
The referenced assembly could not be found.
0x00003702 – ERROR_SXS_CORRUPT_ACTIVATION_STACK
The activation context activation stack for the running thread of execution is corrupt.
0x00003703 – ERROR_SXS_CORRUPTION
The application isolation metadata for this process or thread has become corrupt.
0x00003704 – ERROR_SXS_EARLY_DEACTIVATION
The activation context being deactivated is not the most recently activated one.
0x00003705 – ERROR_SXS_INVALID_DEACTIVATION
The activation context being deactivated is not active for the current thread of execution.
0x00003706 – ERROR_SXS_MULTIPLE_DEACTIVATION
The activation context being deactivated has already been deactivated.
0x00003707 – ERROR_SXS_PROCESS_TERMINATION_REQUESTED
A component used by the isolation facility has requested to terminate the process.
0x00003708 – ERROR_SXS_RELEASE_ACTIVATION_ONTEXT
A kernel mode component is releasing a reference on an activation context.
0x00003709 – ERROR_SXS_SYSTEM_DEFAULT_ACTIVATION_CONTEXT_EMPTY
The activation context of the system default assembly could not be generated.
0x0000370A – ERROR_SXS_INVALID_IDENTITY_ATTRIBUTE_VALUE
The value of an attribute in an identity is not within the legal range.
0x0000370B – ERROR_SXS_INVALID_IDENTITY_ATTRIBUTE_NAME
The name of an attribute in an identity is not within the legal range.
0x0000370C – ERROR_SXS_IDENTITY_DUPLICATE_ATTRIBUTE
An identity contains two definitions for the same attribute.
0x0000370D – ERROR_SXS_IDENTITY_PARSE_ERROR
The identity string is malformed. This might be due to a trailing comma, more than two unnamed attributes, a missing attribute name, or a missing attribute value.
0x0000370E – ERROR_MALFORMED_SUBSTITUTION_STRING
A string containing localized substitutable content was malformed. Either a dollar sign ($) was followed by something other than a left parenthesis or another dollar sign, or a substitution's right parenthesis was not found.
0x0000370F – ERROR_SXS_INCORRECT_PUBLIC_KEY_OKEN
The public key token does not correspond to the public key specified.
0x00003710 – ERROR_UNMAPPED_SUBSTITUTION_STRING
A substitution string had no mapping.
0x00003711 – ERROR_SXS_ASSEMBLY_NOT_LOCKED
The component must be locked before making the request.
0x00003712 – ERROR_SXS_COMPONENT_STORE_CORRUPT
The component store has been corrupted.
0x00003713 – ERROR_ADVANCED_INSTALLER_FAILED
An advanced installer failed during setup or servicing.
0x00003714 – ERROR_XML_ENCODING_MISMATCH
The character encoding in the XML declaration did not match the encoding used in the document.
0x00003715 – ERROR_SXS_MANIFEST_IDENTITY_SAME_BUT_CONTENTS_DIFFERENT
The identities of the manifests are identical, but the contents are different.
0x00003716 – ERROR_SXS_IDENTITIES_DIFFERENT
The component identities are different.
0x00003717 – ERROR_SXS_ASSEMBLY_IS_NOT_A_DEPLOYMENT
The assembly is not a deployment.
0x00003718 – ERROR_SXS_FILE_NOT_PART_OF_ASSEMBLY
The file is not a part of the assembly.
0x00003719 – ERROR_SXS_MANIFEST_TOO_BIG
The size of the manifest exceeds the maximum allowed.
0x0000371A – ERROR_SXS_SETTING_NOT_REGISTERED
The setting is not registered.
0x0000371B – ERROR_SXS_TRANSACTION_CLOSURE_INCOMPLETE
One or more required members of the transaction are not present.
0x00003A98 – ERROR_EVT_INVALID_CHANNEL_PATH
The specified channel path is invalid.
0x00003A99 – ERROR_EVT_INVALID_QUERY
The specified query is invalid.
0x00003A9A – ERROR_EVT_PUBLISHER_METADATA_NOT_FOUND
The publisher metadata cannot be found in the resource.
0x00003A9B – ERROR_EVT_EVENT_TEMPLATE_NOT_FOUND
The template for an event definition cannot be found in the resource (error = %1).
0x00003A9C – ERROR_EVT_INVALID_PUBLISHER_NAME
The specified publisher name is invalid.
0x00003A9D – ERROR_EVT_INVALID_EVENT_DATA
The event data raised by the publisher is not compatible with the event template definition in the publisher's manifest.
0x00003A9F – ERROR_EVT_CHANNEL_NOT_FOUND
The specified channel could not be found. Check channel configuration.
0x00003AA0 – ERROR_EVT_MALFORMED_XML_TEXT
The specified XML text was not well-formed. See extended error for more details.
0x00003AA1 – ERROR_EVT_SUBSCRIPTION_TO_DIRECT_CHANNEL
The caller is trying to subscribe to a direct channel which is not allowed. The events for a direct channel go directly to a log file and cannot be subscribed to.
0x00003AA2 – ERROR_EVT_CONFIGURATION_ERROR
Configuration error.
0x00003AA3 – ERROR_EVT_QUERY_RESULT_STALE
The query result is stale or invalid. This might be due to the log being cleared or rolling over after the query result was created. Users should handle this code by releasing the query result object and reissuing the query.
0x00003AA4 – ERROR_EVT_QUERY_RESULT_INVALID_POSITION
Query result is currently at an invalid position.
0x00003AA5 – ERROR_EVT_NON_VALIDATING_MSXML
Registered Microsoft XML (MSXML) does not support validation.
0x00003AA6 – ERROR_EVT_FILTER_ALREADYSCOPED
An expression can only be followed by a change-of-scope operation if it itself evaluates to a node set and is not already part of some other change-of-scope operation.
0x00003AA7 – ERROR_EVT_FILTER_NOTELTSET
Cannot perform a step operation from a term that does not represent an element set.
0x00003AA8 – ERROR_EVT_FILTER_INVARG
Left side arguments to binary operators must be either attributes, nodes, or variables and right side arguments must be constants.
0x00003AA9 – ERROR_EVT_FILTER_INVTEST
A step operation must involve either a node test or, in the case of a predicate, an algebraic expression against which to test each node in the node set identified by the preceding node set can be evaluated.
0x00003AAA – ERROR_EVT_FILTER_INVTYPE
This data type is currently unsupported.
0x00003AAB – ERROR_EVT_FILTER_PARSEERR
A syntax error occurred at position %1!d!
0x00003AAC – ERROR_EVT_FILTER_UNSUPPORTEDOP
This operator is unsupported by this implementation of the filter.
0x00003AAD – ERROR_EVT_FILTER_UNEXPECTEDTOKEN
The token encountered was unexpected.
0x00003AAE – ERROR_EVT_INVALID_OPERATION_OVER_ENABLED_DIRECT_CHANNEL
The requested operation cannot be performed over an enabled direct channel. The channel must first be disabled before performing the requested operation.
0x00003AAF – ERROR_EVT_INVALID_CHANNEL_PROPERTY_VALUE
Channel property %1!s! contains an invalid value. The value has an invalid type, is outside the valid range, cannot be updated, or is not supported by this type of channel.
0x00003AB0 – ERROR_EVT_INVALID_PUBLISHER_PROPERTY_VALUE
Publisher property %1!s! contains an invalid value. The value has an invalid type, is outside the valid range, cannot be updated, or is not supported by this type of publisher.
0x00003AB1 – ERROR_EVT_CHANNEL_CANNOT_ACTIVATE
The channel fails to activate.
0x00003AB2 – ERROR_EVT_FILTER_TOO_COMPLEX
The xpath expression exceeded supported complexity. Simplify it or split it into two or more simple expressions.
0x00003AB3 – ERROR_EVT_MESSAGE_NOT_FOUND
The message resource is present but the message is not found in the string or message table.
0x00003AB4 – ERROR_EVT_MESSAGE_ID_NOT_FOUND
The message ID for the desired message could not be found.
0x00003AB5 – ERROR_EVT_UNRESOLVED_VALUE_INSERT
The substitution string for the insert index (%1) could not be found.
0x00003AB6 – ERROR_EVT_UNRESOLVED_PARAMETER_INSERT
The description string for the parameter reference (%1) could not be found.
0x00003AB7 – ERROR_EVT_MAX_INSERTS_REACHED
The maximum number of replacements has been reached.
0x00003AB8 – ERROR_EVT_EVENT_DEFINITION_NOT_OUND
The event definition could not be found for the event ID (%1).
0x00003AB9 – ERROR_EVT_MESSAGE_LOCALE_NOT_FOUND
The locale-specific resource for the desired message is not present.
0x00003ABA – ERROR_EVT_VERSION_TOO_OLD
The resource is too old to be compatible.
0x00003ABB – ERROR_EVT_VERSION_TOO_NEW
The resource is too new to be compatible.
0x00003ABC – ERROR_EVT_CANNOT_OPEN_CHANNEL_OF_QUERY
The channel at index %1 of the query cannot be opened.
0x00003ABD – ERROR_EVT_PUBLISHER_DISABLED
The publisher has been disabled and its resource is not available. This usually occurs when the publisher is in the process of being uninstalled or upgraded.
0x00003AE8 – ERROR_EC_SUBSCRIPTION_CANNOT_ACTIVATE
The subscription fails to activate.
0x00003AE9 – ERROR_EC_LOG_DISABLED
The log of the subscription is in a disabled state and events cannot be forwarded to it. The log must first be enabled before the subscription can be activated.
0x00003AFC – ERROR_MUI_FILE_NOT_FOUND
The resource loader failed to find the Multilingual User Interface (MUI) file.
0x00003AFD – ERROR_MUI_INVALID_FILE
The resource loader failed to load the MUI file because the file failed to pass validation.
0x00003AFE – ERROR_MUI_INVALID_RC_CONFIG
The release candidate (RC) manifest is corrupted with garbage data, is an unsupported version, or is missing a required item.
0x00003AFF – ERROR_MUI_INVALID_LOCALE_NAME
The RC manifest has an invalid culture name.
0x00003B00 – ERROR_MUI_INVALID_ULTIMATEFALLBACK_NAME
The RC Manifest has an invalid ultimate fallback name.
0x00003B01 – ERROR_MUI_FILE_NOT_LOADED
The resource loader cache does not have a loaded MUI entry.
0x00003B02 – ERROR_RESOURCE_ENUM_USER_STOP
The user stopped resource enumeration.
0x00003B03 – ERROR_MUI_INTLSETTINGS_UILANG_NOT_INSTALLED
User interface language installation failed.
0x00003B04 – ERROR_MUI_INTLSETTINGS_INVALID_LOCALE_NAME
Locale installation failed.
0x00003B60 – ERROR_MCA_INVALID_CAPABILITIES_STRING
The monitor returned a DDC/CI capabilities string that did not comply with the ACCESS.bus 3.0, DDC/CI 1.1, or MCCS 2 Revision 1 specification.
0x00003B61 – ERROR_MCA_INVALID_VCP_VERSION
The monitor's VCP version (0xDF) VCP code returned an invalid version value.
0x00003B62 – ERROR_MCA_MONITOR_VIOLATES_MCCS_SPECIFICATION
The monitor does not comply with the MCCS specification it claims to support.
0x00003B63 – ERROR_MCA_MCCS_VERSION_MISMATCH
The MCCS version in a monitor's mccs_ver capability does not match the MCCS version the monitor reports when the VCP version (0xDF) VCP code is used.
0x00003B64 – ERROR_MCA_UNSUPPORTED_MCCS_VERSION
The monitor configuration API works only with monitors that support the MCCS 1.0, MCCS 2.0, or MCCS 2.0 Revision 1 specifications.
0x00003B65 – ERROR_MCA_INTERNAL_ERROR
An internal monitor configuration API error occurred.
0x00003B66 – ERROR_MCA_INVALID_TECHNOLOGY_TYPE_RETURNED
The monitor returned an invalid monitor technology type. CRT, plasma, and LCD (TFT) are examples of monitor technology types. This error implies that the monitor violated the MCCS 2.0 or MCCS 2.0 Revision 1 specification.
0x00003B67 – ERROR_MCA_UNSUPPORTED_COLOR_TEMPERATURE
The SetMonitorColorTemperature() caller passed a color temperature to it that the current monitor did not support. CRT, plasma, and LCD (TFT) are examples of monitor technology types. This error implies that the monitor violated the MCCS 2.0 or MCCS 2.0 Revision 1 specification.
0x00003B92 – ERROR_AMBIGUOUS_SYSTEM_DEVICE
The requested system device cannot be identified due to multiple indistinguishable devices potentially matching the identification criteria.
0x00003BC3 – ERROR_SYSTEM_DEVICE_NOT_FOUND
The requested system device cannot be found.
Forget about the pain that you have to take when your printer gets a paper jam or paper feed issue. You can now get permanent fix for this from printer executives. Make a call at Epson Support Number UK and get directly in touch with our brilliant technical team. Our teams focus on providing the best solution to our customers so that they do not have to deal with the same problem again and again.
ResponderEliminarasdadasdadsd s dal jdlksajd lkasdlka jd R2H28A
ResponderEliminarasdflkjslkfj skjflksjfdlkasj flksadjf lksadfs
ResponderEliminarR2H28A price