Mostrar mensagens com a etiqueta microcontroller. Mostrar todas as mensagens
Mostrar mensagens com a etiqueta microcontroller. Mostrar todas as mensagens

terça-feira, 18 de maio de 2021

Winbond W78L32-24 8-bit microcontroller

Winbond Electronics W78L32-24 8-bit microcontroller 

The W78L32 microcontroller supplies a wider frequency range and supply voltages than most 8-bit microcontrollers on the market. It is compatible with the industry standard 80C32 microcontroller series. Contains four 8-bit bidirectional parallel ports, three 16-bit timer/counters and a serial port. These peripherals are supported by a six-source, two-level interrupt capability. There are 256 bytes of RAM, and the device supports ROMless operation for application programs. The W78L32 microcontroller has two power reduction modes, idle mode and power-down mode, both of which are software selectable. The idle mode turns off the processor clock but allows for continued peripheral operation. The power-down mode stops the crystal oscillator for minimum power consumption. The external clock can be stopped at any time and in any state without affecting the processor.

Features:
· Fully static design
· Supply voltage of 1.8V to 5.5V
· Low power consumption at full supply voltage
· DC-24 MHz operation
· 256 bytes of on-chip scratchpad RAM
· 64K bytes program memory address space
· 64K bytes data memory address space
· Four 8-bit bidirectional ports
· Three 16-bit timer/counters
· One full duplex serial port
· Boolean processor
· Six-source, two-level interrupt capability
· Built-in power management

Datasheet: https://www.keil.com/dd/docs/datashts/winbond/w78l32.pdf

quarta-feira, 28 de abril de 2021

Electronic dimmer H097 microcontroller to change dynamically the intensity of LED lights on an electronic circuit

Electronic microcontroller dimmer to change dynamically the intensity of LED lights on an electronic circuit.

Microcontrolador eletrónico para alterar dinamicamente a intensidade das luzes LED em um circuito eletrónico.

Dimmer H097 module: This are devices used to vary the intensity of an average electrical current in a circuit. They consist of graders that decrease or increasing the effective value voltage and therefore an increase in the average power of a lamp, control the intensity of the light according to it. This device also can be used through a potentiometer to increase or decrease the luminous intensity, and control the brightness that de devices illuminates.